按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

陳貞光教授JHEWN-KUANG CHEN

Jkchen
現職:
臺北科大/材料科學與工程研究所
聯絡方式:
分機:2763
網站連結:
  • 1995 PhD, Materials Engineering Science, Virginia Polytechnic Institute and State University, USA
  • 1992 M.S., Materials Engineering, Virginia Polytechnic Institute and State University, USA
  • 1987 國立台北工業專科學校 礦冶工程科 冶金組 Metallurgical Engineering, National Taipei Institute of Technology, Taipei, TAIWAN
  • 2021 國立台北科技大學 材料及資源工程系 教授兼任工程學院院長,Professor and Dean, College of Engineering
  • 2016-2021 國立台北科技大學 材料及資源工程系教授,兼系主任暨材料科學與工程研究所所長, Professor and Chairman, Department of Mineral Resources & Materials Engineering
  • 2009-2016 國立台北科技大學 材料及資源工程系 副教授,Associate Professor, Dept. Mineral Resources & Materials Eng.
  • 2005-2009 國立台北科技大學 材料及資源工程系 助理教授 Assistant Professor, National Taipei University of Technology
  • 1998-2005 中國鋼鐵公司鋼鐵鋁品研發處 研究員 Research Scientist, China Steel Corporation, Kaohsiung, TAIWAN
  • 1997-1998 Research fellow, Exxon Research and Engineering Company, Corporate Research, USA (currently ExxonMobil Research and Engineering Company, Clinton Research Center)
  • 1995-1997 Postdoctoral fellow, McMaster University, CANADA
  • metals and composite processing; structure and properties of metals; additive manufacturing (3D printing) of metals; development of ferrous and non-ferrous metals.
  • 金屬與陶瓷材料製程開發、薄膜材料開發、金屬積層製造(3D列印)、相變態與介面結構分析、鋼鐵產品與製程研發

期刊論文

  • "Sustaining Cellular Structures in Additively Manufactured AlSi10Mg Alloy via Heat Treatments", Journal of Materials Engineering and Performance, 2024/10, SCI
  • "Laser-induced three-dimensional deposition of calcium phosphate on porous Ti6Al4V", Materials Letter, 373, 137132, 2024/07, SCI
  • "Core-rim microstructure formation and mechanical properties of TiB2 ceramics with TiC, B4C, Co, and Mo sintering aids", Ceramics International, 49, 40689-40694, 2023/10, SCI
  • "Inconel 713LC 鎳基超合金之選擇性雷射熔融組織及性質研究", 粉體及粉末冶金會刊, 48, 3, 229-237, 2023/08, ELSE1
  • "純銀線材的連續鑄造與組織", 鑄造工程學刊, 49, 1, 11-18, 2023/06, ELSE1
  • "Revealing the intensified preferred orientation and factors dominating the anisotropic mechanical properties of laser powder bed fusion Ti6Al4V alloy after heat treatment", Journal of Alloys and Compounds, 949, 169494, 2023/03, SCI
  • "車用C 型鍶系鐵氧體磁石的成形模具 對其在馬達特性上之影響研究", 粉體及粉末冶金會刊, 46, 4, 239, 2022/11, ELSE1
  • "Permeability of Additive Manufactured Cellular Structures—A Parametric Study on 17-4 PH Steels, Inconel 718, and Ti-6Al-4V Alloys", Journal of Manufacturing and Materials Processing, 6, 5, 114, 2022/10, SCI
  • "Construction of an Additional Hierarchical Porous Framework in Carbon Fabric for Applications in Energy Storage", Chemistry of Materials, 34, 18, 8127-8137, 2022/08, SCI
  • "選擇性雷射熔融多孔材料之孔隙比例控制研究", 鑄造工程學刊, 48, 1, 1-8, 2022/06, ELSE1
  • "Microencapsulated Liquid Metals for the Autonomous Restoration of In-Mold Electronic Circuits", Applied Electronic Materials, 4, 936-945, 2022/02, SCI
  • "Uniaxial Compression Properties and Compression Fatigue Performance of Selective Laser Melted Ti–6Al–4V Cellular Structure", Metals and Materials International, 28, 1, 132-144, 2022/01, SCI
  • "Compression deformation and fracture behaviors of laser powder bed fusion Ti-6Al-4V cellular solid during in situ tests", Materials Letters, 303, 130462, 2021/07, SCI
  • "Good Structural Stability of Si Anodes Achieved through Dispersant Addition and Use of Carbon Fabric as Conductive Framework", Journal of The Electrochemical Society, 168, 060517, 2021/06, SCI
  • "Air Permeability of Maraging Steel Cellular Parts Made by Selective Laser Melting", Materials, 14, 3118, 2021/06, SCI
  • "Intensification of preferred orientation in the additive manufactured Ti-6Al-4V alloy after heat treatment", Materials Letters, 286, 129198, 2021/01, SCI
  • "Iron Reduction in 356 SecondaryAluminum Alloy by Mn and Cr Addition forSediment Separation", International Journal of Metalcasting, 15, 15, 182-192, 2021/01, SCI
  • "Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities", Materials Science & Engineering A, 790, 139695, 2020/12, SCI
  • "Compression Property, Deformation Behavior, and Fracture Mechanism of Additive-Manufactured Ti-6Al-4V Cellular Solid with a New Cuboctahedron Structure", METALLURGICAL AND MATERIALS TRANSACTIONS A, 51A, 12, 651-6527, 2020/12, SCI
  • "選擇性雷射熔融Inconel 718 合金之熱處理製程研究", 粉體及粉末冶金會刊第45 卷第2 期(2020 年5 月), 45, 2, 110-114, 2020/05, ELSE1
  • "氣機葉片材料真空重熔精煉之研究與應用", 台電工程月刊, 861, 861, 62-72, 2020/05, ELSE1
  • "射熔覆Inconel 718鎳基超合之 高溫機械性質研究", 鑄造工程學刊, 46, 1, 1-8, 2020/03, ELSE1
  • "Simulation of Compressive Stress–Strain Curve for Additive Manufactured Ti6Al4V Cuboctahedron Cellular Structure", TMS2020 Supplemental Proceedings, 149, 835-842, 2020/02, EI
  • "CAE analysis on the mechanical properties of a 3D-printed lattice structure from Ti-6Al-4V for biomedical applications", Proceedings of the International Conference of Computational Methods in Sciences and Engineering 2019, 2186, 150001, 150001-1-7, 2019/12, EI
  • "In Vitro and In Vivo Evaluations of Mesoporous Iron Particles for Iron Bioavailability", International Journal of Molecular Sciences, 20, 5291, 16, 2019/11, SCI
  • "熱處理對選擇性雷射熔融17-4析出硬化不鏽鋼之性質影響研究", 粉體及粉末冶金會刊, 44, 3, 187-192, 2019/08, ELSE1
  • "Continuous compression behaviors of selective laser melting Ti-6Al-4V alloy with cuboctahedron cellular structures", Materials Science and Engineering C, 100, 781-788, 2019/07, SCI
  • "A356.0二次鋁合金之除鐵製程開發", 鑄造工程學刊, 45, 2, 19-26, 2019/06, ELSE1
  • "電子束熔融製備多孔Ti-6Al-4V 結構 與壓縮性質研究", 粉體及粉末冶金會刊, 44, 2, 160, 2019/05, ELSE1
  • "煉鋼轉爐石之無機聚合安定化技術開發", 鑛冶, 62, 4, 52, 2018/12, ELSE1
  • "雷射選區熔融多孔Ti-6Al-4V 合金之 壓縮疲勞性質研究", 粉體及粉末冶金會刊, 43, 3, 1-6, 2018/08, ELSE1
  • "Effects of Neodymium and Calcium on Thermal Stability of AZ71 Magnesium Alloys", Metals Mater. Intn’l, 24, 2, 307-313, 2018/02, SCI
  • "電子束與雷射積層熔融鈦鋁釩合金之微結構 與機械性質比較", 粉體及粉末冶金會刊, 42, 4, 224-230, 2017/12, ELSE1
  • "Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by HIP", Materials and Design, 134, 163-170, 2017/08, SCI
  • "雷射積層熔融鈦鋁釩合金之電導與熱導性質", 粉體及粉末冶金會刊, 42, 1, 10-14, 2017/03, ELSE1
  • "雷射積層熔融製造Ti-6Al-4V 合金之壓縮性質研究", 粉體及粉末冶金會刊, 42, 1, 4-9, 2017/03, ELSE1
  • "Effects of casting and heat treatment processes on the thermal conductivity of an Al-Si-Cu-Fe-Zn alloy", International Journal of Heat and Mass Transfer, 105, 1, 189-195, 2017/01, SCI
  • "Anisotropic Compression Properties of Selective Laser Melted Ti-6Al-4V", Key Engineering Materials, 719, 87-91, 2017/01, EI
  • "鋁基氮化鋁複合材料之熱學性質研究", 粉體及粉末冶金會刊, 41, 4, 1-6, 2016/12, ELSE1
  • "熱處理溫度對選擇性雷射熔融Ti-6Al-4V 合金之橫向破裂強度及衝擊韌性的影響", 粉體及粉末冶金會刊, 41, 3, 224-231, 2016/09, ELSE1
  • "熱處理對選擇性雷射熔融Ti-6Al-4V 合金之顯微組織的效應", 粉體及粉末冶金會刊, 41, 1, 58-65, 2016/03, ELSE1
  • "Microstructural Evolutions and Properties of Partially Austenitizing and Austempered Ductile Irons", Steel Research International, 87, 2, 191-198, 2016/02, SCI
  • "Anisotropy in the impact toughness of selective laser melted Ti–6Al–4V alloy", Materials Science and Engineering A, 650, 1, 295-299, 2016/01, SCI
  • "The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", MATEC Web of Conferences, 27, 02010p.1-5, 2015/10, EI
  • "Effects of Nd and rotary forging on mechanical properties of AZ71 Mg alloys", Trans. Nonferrous Met. Soc. China, 25, 10, 3223-3231, 2015/10, SCI
  • "Microstructures and Mechanical Properties of 440C Stainless Steel Strengthened with TaC via Vacuum Sintering and Heat Treatments", Materials Transactions, 56, 9, 1585-1590, 2015/09, SCI
  • "Effects of Molybdenum Microstructures on Sputtered Films", Materials Trans., 56, 5, 665-670, 2015/05, SCI
  • "Thermal and electrical conductivity in Al–Si/Cu/Fe/Mg binary and ternary alloys", Journal of Materials Science, 50, 5630-5639, 2015/05, SCI
  • "爐渣脫硫能力之熱力學模擬計算研究", 冶, 59, 1, 111-116, 2015/03, ELSE1
  • "逆向擠製釹鐵硼環狀磁石之製程研究", 粉體及粉末冶金會刊, 40, 1, 57-61, 2015/03, ELSE1
  • "Thermodynamic Calculations of Desulfurization in Low Carbon Steel-Slag System", SEAISI Quarterly Journal, 44, 1, 52-58, 2015/03, EI
  • "矽含量對鋁矽合金熱傳導性質之影響", 鑄造工程學刊, 40, 3, 1-8, 2014/09, ELSE1
  • "Effects of B upon glass forming ability of Al87Y8Ni5 amorphous alloy", Journal of Alloys and Compounds, 565, 7, 29-36, 2013/07, SCI
  • "Improvement of Mechanical and Electrical Properties on the Sintered Ni-50 mass% Cr Alloys by HIP Treatments", Mater. Trans. JIM, 54, 6, 1034-1039, 2013/06, SCI
  • "Thermal properties of aluminum–graphite composites by powder metallurgy", Composites Part B, 44, 1, 698-703, 2013/01, SCI
  • "Microstructure and Mechanical Properties of Cr-W-B-N Coating Deposited by DC Reactive Magnetron Co-sputtering", Advanced Materials Research, 651, 430-435, 2013/01, EI
  • "球墨鑄鐵排氣歧管之澆鑄模擬研究", 鑄造工程學刊, 154, 3, 21-29, 2012/09, ELSE1
  • "跟隨勇氣找到真理-2011年諾貝爾化學獎得主謝茲曼", 科學人, 126, 126, 82-87, 2012/08, ELSE1
  • "X光窗之擴散接合研究", 粉末冶金會刊, 37, 3, 1-8, 2012/08, ELSE1
  • "Study on the microstructures, electrical resistance and mechanical properties of sputtering chromium target by HP, HIP and canning–HIP processes", Int. Journal of Refractory Metals and Hard Materials, 35, 70-75, 2012/08, SCI
  • "Optimization of Ge–Sb–Sn–O Films for Thermal Lithography of Submicron Structures", Jap. J. Appl. Phys., 51, 6, 06FC03-01~06, 2012/06, SCI
  • "Structures and Properties of (TiAlSi)N Films", Proc. Eng., 36, 5, 335-340, 2012/05, EI
  • "Inorganic Resist Film for Submicron Structure Fabrication", Proc. Eng., 36, 5, 482-487, 2012/05, EI
  • "2011年諾貝爾化學獎得主-丹•謝特曼教授", 科學發展, 473, 5, 44-47, 2012/05, ELSE1
  • "Design of a Novel Pump for Bio-Applications", Proc. SPIE, 8428, 84281F, 1-7, 2012/04, EI
  • "鋁基-石墨複合材料之熱性質研究", 礦冶, 56, 1, 41-48, 2012/03, ELSE1
  • "Effects of Post-Oxidizing Treatment on Melting Loss and Corrosion Resistance of Gas Nitrided AISI H13 Tool Steel", ISIJ Intn’l, 52, 3, 499-504, 2012/03, SCI
  • "鎳鉻鉬合金鋼表面共滲鋁鉻之包覆擴散處理", 粉末冶金會刊, 37, 1, 12-20, 2012/02, ELSE1
  • "Formation of Al and Cr Dual Coatings by Pack Cementation on SNCM439 Steel", ISIJ International, 52, 1, 127-133, 2012/01, SCI
  • "The effects of adding TiC powders to VANADIS 4 tool steel by HIP treatment", Advanced Materials Research, 413, 426-431, 2012/01, EI
  • "添加金屬銅對SUS 304不�瓡�顯微組織及抗菌性質影響", 金屬熱處理, 111, 17-24, 2011/12, ELSE1
  • "添加金屬銀對SUS 316L不�瓡�之顯微組織及抗菌性質影響", 金屬熱處理, 111, 10-16, 2011/12, ELSE1
  • "銅-碳化鎢複合材料之燒結與熱性質", 粉末冶金學刊, 36, 3, 191-197, 2011/08, ELSE1
  • "旋鍛製程與退火處理對AZ鎂合金之機械性質影響", 鎂合金產業通訊, 54, 8, 191-197, 2011/08, ELSE1
  • "Fe-Nb-B-Ta合金的非晶質形成能力及軟磁性質之研究", 鑄造工程學刊, 37, 149, 35, 2011/06, ELSE1
  • "微量Sc對Zr-Cu-Al-Ni合金顯微結構及機械性質之影響", 鑄造工程學刊, 37, 148, 27, 2011/03, ELSE1
  • "(Zr50Cu35Ni6Al9)100-XScX非晶合金的晶化行為及顯微結構之研究", 鑄造工程學刊, 37, 148, 7, 2011/03, ELSE1
  • "銅基-碳化鎢之複合電鍍與其熱導性研究", 粉末冶金學刊, 36, 2, 93-99, 2011/02, ELSE1
  • "雙相區沃斯回火球墨鑄鐵處理之韌性研究", 金屬熱處理, 107, 31-38, 2011/01, ELSE1
  • "水份與抑制劑對鎂合金濕砂膜鑄件影響之研究", 鑄造工程學刊, 36, 4, 1-5, 2010/12, ELSE1
  • "Effects of Sintering Processes on Composite Tool Steels Containing Self-Synthesized TiC", ISIJ International, 50, 10, 1453-1459, 2010/10, SCI
  • "Formation and Magnetic Properties of Fe-Si-B-Dy Amorphous alloy", Intermetallics, 18, 10, 1826-1828, 2010/10, SCI
  • "Thermal Stability and Corrosion Behavior of Cu-Zr-Al-Y bulk Metallic Glass", Intermetallics, 18, 10, 1954-1957, 2010/10, SCI
  • "Effects of Microstructural Evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment", Advanced Materials Research, 129-131, 1114-1118, 2010/07, EI
  • "氮氧化製程對AISI H13模具鋼微結構及抗熔損之影響", 金屬熱處理, 105, 29-37, 2010/06, ELSE1
  • "鑄鐵組織與成分對熱導性質之影響", 鑄造工程學刊, 36, 2, 7-16, 2010/06, ELSE1
  • "AZ91D鎂合金之熱變形模擬分析", 鎂合金產業通訊, 12, 2, 42-47, 2010/05, ELSE1
  • "AZ91鎂合金濕砂模鑄造法之研究", 鑄造工程學刊, 35, 3, 39-45, 2010/01, ELSE1
  • "部分沃斯田鐵化之沃斯回火球墨鑄鐵機械性質研究", 鑄造工程學刊, 36, 1, 1-8, 2010/01, ELSE1
  • "Effects of Zinc Oxide on Thermal shock Behavior of Zinc Sulfide-Silicon Dioxide Ceramics", Ceram. International, 35, 2999-3004, 2010/01, SCI
  • "熱均壓TiC-420J2複合鋼材之性質分析", 粉末冶金會刊, 34, 4, 3-7, 2009/11, ELSE1
  • "應用田口法於鎂合金壓鑄製程參數最佳化", 鎂合金產業通訊, 47, 11, 69-75, 2009/11, ELSE1
  • "鎂合金濕砂模鑄造法之機械性質探討", 鎂合金產業通訊, 47, 11, 76-81, 2009/11, ELSE1
  • "Cr-Si合金顯微結構與薄膜電性分析", 礦冶, 53, 3, 33-38, 2009/10, ELSE1
  • "利用原生TiC強化複合工具鋼製程研究", 粉末冶金會刊, 34, 3, 68-77, 2009/09, ELSE1
  • "大型鎂合金壓鑄件充填過程之數值模擬分析", 鑄造工程學刊, 35, 2, 28-36, 2009/06, ELSE1
  • "Effects of Zinc Oxide on Thermal Shock Behavior of Zinc Sulfide-Silicon Dioxide Ceramics", Ceramics International, in press, 061/2009, 2009/03, SCI&EI
  • "Enhancement of erosion resistance on AISI H13 tool steel by oxynitriding treatment", ISIJ International, 49, 3, 421-424, 2009/03, SCI&EI
  • "利用機械合金法製備原生TiC製程研究", 粉末冶金會刊, 34, 1, 25-29, 2009/02, ELSE1
  • "鎳鉻鉬合金鋼表面鐵鋁合金硬化處理之研究", 礦冶, 52, 4, 110-115, 2008/12, ELSE1
  • "Study of Aging Behavior in Hot-Rolled Low Carbon Steel", Steel Research International, 79, 9, 708-712, 2008/09, SCI&EI
  • "Effects of Zinc Oxide and Porosity on Permittivity of Sintered Zinc", Japanese Journal of Applied Physics, 47, 7, 5539-5544, 2008/07, SCI&EI
  • "SURFACE HARDENING OF MEDIUM CARBON STEELS BY ALUMINIZATION", SEAISI Quarterly Journal, 37, 2, 16-20, 2008/07, EI
  • "Effects of Intercritical Treatments on Structures and Properties of SD420W High Strength Rebar Steels", SEAISI Quarterly Journal, 37, 1, 31-36, 2008/04, EI
  • "Effects of Bi on Crystallization in Ge-Sb-Te-Bi", Materials Science and Technology, 24, 4, 501-504, 2008/04, SCI&EI
  • "Effects of Particle size on Mechanical Properties of a TiC Containing Tool Steel by Hot Isostatic Press", Mater. Trans. JIM, 49, 3, 624-628, 2008/03, SCI&EI
  • "以熱均壓法強化複合工具鋼之特性研究", 礦冶, 51, 4, 80-86, 2007/12, ELSE1
  • "Improvement in the Microstructure and Tensile Properties of Inconel 718 Superalloy by HIP Treatment", Mater. Trans. JIM, 47, 11, 2877-2881, 2006/11, SCI&EI
  • "平面顯示器用高純度鋁濺鍍靶材開發", 礦冶, 49, 1, 107-117, 2005/01, ELSE1
  • "液晶顯示器與其濺鍍靶材之介紹", 技術與訓練, 27, 4, 2002/08, ELSE1
  • "光碟用靶材的介紹", 技術與訓練, 27, 4, 2002/08, ELSE1
  • "Phase transformations and phase equilibria in Ti-25V-N system at 1200 C", Materials Science and Technology, 18, 1, 13-20, 2002/01, SCI&EI

專書著作

  • 材料熱力學, 偉明圖書有限公司, 978-986-91903-7, 2020/09/14

專章著作

  • On Thermal Conductivity of an In-Situ Metal Matrix Composite - Cast Iron, 1, InTech, 978-953-307-353-8, 2011/07/01

研討會論文

  • "結合液相與反應燒結之TiB2 複合材料", 中華民國粉體及粉末冶金協會113年年會, 南投, 2024/08/23
  • "Additive Manufacturing and Heat Treatment of AISI 4140 Steel", India-Taiwan International Symposium on AM 2024, 台北, 2024/08/14
  • "Air Permeability of Porous Materials Made by Selective Laser Melting", APMA 2023, Geyongju, 2023/11/27
  • "雷射金屬沉積 Inconel 738LC 鎳基超合金之製程優化", 台灣鑄造學會112年年會, 桃園, 2023/11/24
  • "Inconel 713LC鎳基超合金之選擇性雷射熔融組織及性質研究", 中華民國粉體及粉末冶金協會112年年會, 台南, 2023/11/18
  • "Reaction and Liquid Phase Sintered TiB2", 2023 MRS-T International Conference, Hsinchu, 2023/11/17
  • "Additive Manufacturing and In-Situ Heat Treatment of AISI 4140 Steel", 2023 MRS-T International Conference, Hsinchu, 2023/11/17
  • "Heat Treatment of Selective Laser Melting AlSi10Mg Alloy", 2023 MRS-T International Conference, Hsinchu, 2023/11/17
  • "Post-treatments of Laser Metal Deposited Inconel 738 LC Weld", The Japan Institute of Metals and Materials 日本金学2023年秋期(第173回 )講演大, 富山, 2023/09/20
  • "Inconel 713LC 鎳基超合金之選擇性雷射熔融組織及性質研究", 中華民國粉體及粉末冶金協會112年年會, 台南, 2023/08/18
  • "純銀線材的連續鑄造與組織", 台灣鑄造學會111年年會, 臺中, 2022/11/23
  • "T6熱處理與冷鍛壓對6063鋁鑄棒性質之影響", 台灣鑄造學會111年年會, 臺中, 2022/11/23
  • "6005鋁合金之T6熱處理優化", 中國材料科學學會, 苗栗, 2022/11/18
  • "鎳基IN718超合金之積層製造與特性", 軍民通用材料暨光電應用產業研討會, 台北, 2021/12/21
  • "Laser Cladding of Al0.5CoCrFeNi2 High-Entropy Alloy on Inconel 718 Substrate", TACT 2021 International Thin Films Conference, Taipei, 2021/11/15
  • "TiB2 Prepared by Solid-State Reaction with Pressureless Sintering", MRSTIC 2021, 2021 MRS-T International Conference, Taipei, 2021/11/13
  • "Stress Analyses of Additive Manufacturing Defects on Cuboctahedron Cellular Structure", MRSTIC 2021, 2021 MRS-T International Conference, Taipei, 2021/11/13
  • "選擇性雷射熔融多孔材料之孔隙比例控制研究", 台灣鑄造學會年會, 高雄, 2021/10/18
  • "Ti-6Al-4V合金之選擇性雷射熔融", 台灣鑄造學會年會, 台北, 2020/11/28
  • "陽極處理純鈦板之親水性與耐久性研究", 中國材料科學學會109年年會暨論文發表會, 新北市, 2020/11/06
  • "二硼化鈦添加氮化物之無壓燒結研究", 中國材料科學學會109年年會暨論文發表會, 新北市, 2020/11/06
  • "Simulation of Compressive Stress–Strain Curve for Additive Manufactured Ti6Al4V Cuboctahedron Cellular Structure", TMS 2020, 149th Annual Meeting & Exhibition, San Diego, 2020/02/23
  • "Optimization of Toughness and Thermal Stability of AZ71 Magnesium Alloys", 台北科大-日本東北大學雙邊國際研討會, 仙台, 2019/11/24
  • "新型超合金材料開發及特殊成型製程研究", 108年度國家中山科學研究院 國防科技學術合作計畫成果發表會, 龍潭, 2019/11/21
  • "雷射熔覆Inconel 718鎳基超合金之高溫機械性質研究", 台灣鑄造學會108年會, 台中, 2019/11/15
  • "雷射熔銲Inconel 718鎳基超合金之熱處理組織研究", 中國材料科學學會, 台南, 2019/11/15
  • "雷射熔覆Inconel 718鎳基超合金之高溫機械性質研究", 2019年海峽兩岸粉末冶金技術研討會, 博鰲, 2019/10/16
  • "熱處理對選擇性雷射熔融17-4 析出 硬化不鏽鋼之性質影響研究", 中華民國粉體及粉末冶金協會108年會, 高雄, 2019/08/30
  • "CAE analysis on the mechanical properties of a 3D-printed lattice structure from Ti-6Al-4V for biomedical applications", AIP Conference, Rhodes, 2019/05/01
  • "雷射熔銲Inconel 718鎳基超合金之熱處理組織與性質研究", 中科院107年國防科技學術合作計畫成果會, 桃園龍潭, 2018/11/22
  • "A356.0二次鋁合金之除鐵製程開發", 台灣鑄造學會107年年會, 台南, 2018/11/17
  • "電子束熔融多孔Ti-6Al-4V壓縮特性研究", 中國材料科學學會107年年會, 台中, 2018/11/16
  • "雷射熔銲Inconel 718鎳基超合金之熱處理組織研究", 中國材料科學學會107年年會, 台中, 2018/11/16
  • "Fatigue Property of Ti-6Al-4V Cellular Structures Fabricated by Selective Laser Melting", World PM 2018, Beijing, 2018/09/16
  • "雷射選區熔融多孔Ti-6Al-4V合金之壓縮疲勞性質研究", 中華民國粉體及粉末冶金協會2018年年會, 新竹, 2018/08/29
  • "電子束與雷射積層熔融鈦鋁釩合金之微結構與機械性質比較", 中華民國粉體及粉末冶金協會年會, 淡水, 2018/01/01
  • "Microstructures of Ti-8Al-1Mo-1V Hot Rolled Sheets", IUMRS-ICA 2017, 台北, 2017/11/06
  • "Effects of Porosity on Fatigue Property of Selective Laser Melted Ti-6Al-4V Porous Material", IUMRS-ICA 2017, 台北, 2017/11/06
  • "Electrical Performance of Hydrothermal Synthesized VOx and V2O5 for Magnesium Ion Battery", IUMRS-ICA 2017, 台北, 2017/11/06
  • "脫磷爐渣之熱力學與動力學模擬", 中國礦冶工程學會, 苗栗, 2017/10/23
  • "Effects of Building Direction on the Compression Properties of Selective Laser Melted Ti-6Al-4V", APMA 2017 The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
  • "Effect of Heat Treatment on Microstructure and Thermal Conductivity of Selective Laser Melting Ti-6Al-4V Alloy", APMA-2017 The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
  • "Hydrothermal Synthesis of Nanosize V2O5 as An Active Cathode Material for Rechargeable Magnesium Batteries", AMEC-2016 亞洲電子陶瓷國際研討會, 臺北, 2016/12/04
  • "疲勞行為對A356低壓鑄造鋁合金輪圈之失效分析", 台灣鑄造學會一○五年度論文發表會, 彰化, 2016/11/20
  • "選擇性雷射熔融Ti-6Al-4V合金之後處理對組織與熱導性質之影響", 中國材料科學學會, 新竹, 2016/11/19
  • "雷射積層熔融製造Ti-6Al-4V合金之壓縮性質研究", 中國材料科學學會年會, 新竹, 2016/11/19
  • "The Effect of Sintering Temperature on the Microstructure of Fe-1.4 wt.% C Alloy Prepared by Mechanical Alloying", Materials Science & Technology 2016, Salt Lake City, 2016/10/23
  • "鋁基氮化鋁複合材料之熱學性質研究", 中華民國粉末冶金及粉體協會105年年會, 新竹, 2016/08/26
  • "Anisotropic Compression Properties of Selective Laser Melted Ti-6Al-4V", AMRMT 2016, 新加坡, 2016/08/18
  • "銅鋁熔浸界面組織分析研究", 台灣鑄造學會2015年年會, 高雄, 2015/12/02
  • "雷射積層熔融鈦鋁釩合金之電導與熱導性質", 中國材料科學學會2015年年會, 高雄, 2015/11/20
  • "鎂電池正極材料V2O5在鎂質有機鹵素鋁酸鹽電解液之電性探討", 中國材料科學學會2015年年會, 高雄, 2015/11/20
  • "添加鈣釹元素對AZ71鎂合金燃點之影響", 台灣輕金屬協會2015年年會, 高雄, 2015/11/13
  • "脫磷爐渣之熱力學與動力學模擬", 中國礦冶工程學會2015年年會, 高雄, 2015/10/23
  • "The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", 2015 ICEIM, Penang, 2015/09/03
  • "Anisotropic Thermal and Electrical Conductivities of 3DPrinted Ti6Al4V alloy", Ti-2015 international conference, 聖地牙哥, 2015/08/16
  • "Characteristics of V2O5 - Graphite Electrode for Magnesium Ion Battery", IUMRS-ICMAT 2015, 新加坡, 2015/06/28
  • "稀土釹與旋鍛製程對AZ71鎂合金腐蝕特性之影響", 2014年化工年會, 中壢, 2014/12/12
  • "Ti-6Al-4V熱軋組織與異向性研究", 金屬熱處理學會103年年會, 高雄, 2014/12/06
  • "合金元素對無鉛黃銅凝固區間與顯微組織之影響", 台灣鑄造學會103年年會暨論文研討會, 高雄, 2014/11/08
  • "結合熱力學與動力學之精煉爐渣脫硫能力計算", 中國礦冶工程學會103年年會, 台北, 2014/10/17
  • "Effects of Alloying Elements on Thermal Conductivity of Binary Aluminum Alloys", IUMRS-ICEM 2014, 台北, 2014/06/10
  • "Thermodynamic Calculations of Desulfurization in Low Carbon Steel-Slag System", South East Asia Iron and Steel Institute (SEAISI) 2014 International Conference, 吉隆坡, 2014/05/26
  • "矽含量對鋁矽合金熱傳導性質之影響", 台灣鑄造學會102年年會暨論文研討會, 台北, 2013/12/09
  • "Effects of Neodymium on AZ71 Magnesium Alloy Castings", 2013年AFC 亞洲鑄造學會年會, 台北, 2013/12/08
  • "稀土釹與旋鍛製程對AZ71鎂合金之影響", 台灣輕金屬協會, 台北, 2013/11/05
  • "Effect of Silicon on Thermal Conductivity of Al-Si Alloys", Materials Science and Technology (MS&T) 2013, Quebec, 2013/10/27
  • "爐渣脫硫能力之熱力學模擬計算研究", 2013年中國礦冶工程學會年會, 苗栗, 2013/10/25
  • "熱軋及退火製程對商用純鈦之組織與性質影響研究", 2013年中國礦冶工程學會年會, 苗栗, 2013/10/25
  • "軋延與退火製程對鉬板顯微組織與集合組織之影響", 2013年材料學會年會, 中壢, 2013/10/18
  • "Effects of Neodymium and Rotary Swaging on AZ71 Magnesium Alloys", 2013國際鎂合金協會會議, 西安, 2013/05/19
  • "Microstructure and Mechanical Properties of Cr-W-B-N Coating Deposited by DC Reactive Magnetron Co-sputtering", ICEM 2012, 新加玻, 2012/12/30
  • "冷軋純鋁之再結晶特性研究", 中國材料科學學會101年年會, 虎尾, 2012/11/23
  • "以反應共濺鍍法製備氧化鋅鋁透明導電薄膜之性質研究", 中國材料科學學會101年年會, 虎尾, 2012/11/23
  • "X光窗之擴散接合研究", 2012年中華民國粉末冶金學會年會, 台南市, 2012/08/24
  • "The Glass Forming Ability and Crystallization Behavior of Al-Y-Ni-B Amorphous Alloy", 2012 Korea-Taiwan Workshop on Metallic Glasses, Taipei, 2012/06/04
  • "Design of a Novel Pump for Bio-Applications", SPIE Photonics Europe, Brussels Belgium, 2012/04/16
  • "雙相區沃斯回火延性鑄鐵之顯微結構研究", 台灣金屬熱處理學會2011年年會, 臺北, 2011/12/10
  • "球墨鑄鐵排氣歧管之澆鑄模擬研究", 台灣鑄造學會2011年年會, 高雄, 2011/12/04
  • "鋁基石墨複合材料之熱性質研究", 中國礦冶工程學會, 台北, 2011/11/25
  • "感應加熱法成長大面積石墨膜", 中國�Y冶工程學會2011年年會, 台北, 2011/11/24
  • "透過感應加熱法於過渡金屬表面生成石墨膜", 中國�Y冶工程學會2011年年會, 台北, 2011/11/24
  • "Thermal Properties of Aluminum-Flake Graphite by Powder Metallurgy", APMA 2011, Jeju, 2011/10/30
  • "Fabrication of submicron structures by thermal lithography", MNC 2011, Kyoto, 2011/10/25
  • "Structures and Properties of (TiAlSi)N Films", IUMRS-ICA 2011 12th International Conference in Asia, Taipei, 2011/09/19
  • "Microstructural and Mechanical Properties of Cr-B-W-N Coating Deposited by DC Reactive Magnetron Co-Sputtering", 8th Asian-European International Conference on Plasma Surface Engineering, AEPSE 2011, Dalian city, 2011/09/19
  • "Inorganic Resist Film for Submicron Structure Fabrication", IUMRS-ICA 2011 12th International Conference in Asia, Taipei, 2011/09/19
  • "銅-碳化鎢複合材料之燒結與熱性質", 2011年中国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会, 廣州, 2011/08/27
  • "銅-碳化鎢複合材料之燒結與熱性質", 中華民國粉末冶金協會30週年慶暨100年度會員大會、專題研討會, 南投, 2011/08/19
  • "旋鍛製程與退火處理對AZ鎂合金之機械性質影響", 2011台灣鎂合金協會年會暨論文發表會, 臺北, 2011/06/24
  • "微波電漿化學氣相層積中氫含量對於奈米鑽石膜之形成與特性影響", 中華民國生醫材料及藥物制放學會2011年會暨研討會, 臺北, 2011/06/04
  • "Toughening of ADI Austenitized in Intercritical Region", TMS 2011, San Diego, 2011/02/27
  • "中碳鋼S45C感應熱處理製程之研究", 台灣金屬熱處理學會2010年年會, 台南, 2010/12/11
  • "節能與鑄造模流分析", 台灣鑄造學會2010年年會, 台北, 2010/11/28
  • "微量Sc對Zr-Cu-Al-Ni合金顯微結構及機械性質之影響", 台灣鑄造學會2010年年會, 台北, 2010/11/28
  • "(Zr50Cu35Ni6Al9)100-xScx非晶合金的晶化行為及顯微結構之研究", 台灣鑄造學會2010年年會, 台北, 2010/11/28
  • "Fe-Nb-B-Ta合金的玻璃形成能力及軟磁性質之研究", 台灣鑄造學會2010年年會, 台北, 2010/11/28
  • "Al-Y-Ni-B非晶質合金玻璃形成能力及結晶行為研究", 台灣鑄造學會2010年年會, 台北, 2010/11/28
  • "添加Sc的Al-Y-Ni非晶合金熱穩定性及機械性質研究", 台灣鑄造學會2010年年會, 台北, 2010/11/28
  • "銅基-碳化鎢之複合電鍍研究", 中國材料科學學會2010年年會, 高雄市, 2010/11/19
  • "鎳鉻鉬合金鋼表面共滲鋁鉻之包覆擴散處理", 中國礦冶工程學會年會, 台南, 2010/10/07
  • "鎳鈷磷合金無電鍍製程及性質研究", 中國礦冶工程學會年會, 台南, 2010/10/07
  • "Effects of Microstructural evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment", 2010 International Conference on Material and Manufacturing Technology ICMMT, 重慶, 2010/09/17
  • "燒結製程對含鎵之鉍銻碲熱電材料性質影響之研究", 中華民國粉末冶金協會99年度專題研討會, 台南, 2010/08/20
  • "Low Temperature Al and Cr Dual Coatings on SNCM439 Steel", IFHTSE 18, 里約熱內盧, 2010/07/26
  • "雙相區沃斯回火球墨鑄鐵處理之韌性研究", 台灣金屬熱處理學會2009年會, 台北, 2009/12/12
  • "電化學製備Cu-WC複合鍍層之研究", 台灣化學工程學會年會, 台中, 2009/11/27
  • "中碳合金鋼鋁鉻包覆擴散鍍膜研究", 中國材料科學學會2009年會, 花蓮, 2009/11/26
  • "Formation and Magnetic Properties of Fe-Si-B-Dy Amorphous alloy", The 7th International Conference on Bulk Metallic Glasses, Busan, 2009/11/01
  • "Thermal Stability and Corrosion Behavior of Cu-Zr-Al-Y Bulk Metallic Glass", The 7th International Conference on Bulk Metallic Glasses, Busan, 2009/11/01
  • "利用原生TiC強化複合工具鋼製程研究", 海峽兩岸粉末冶金技術研討會, 台中, 2009/08/28
  • "STRENGTHING OF COMPOSITE TOOL STEELS BY SELF-SYNTHESIZED TiC", ICCE-17 17th Annual International Conference on Composites or Nano Engineering, 檀香山, 2009/07/26
  • "球墨鑄鐵之沃斯回火熱處理性質探討", 台灣鑄造學會98年度論文發表會, 新竹, 2009/07/25
  • "部分沃斯田鐵化之沃斯回火球墨鑄鐵機械性質研究", 台灣鑄造學會98年度論文發表會, 新竹, 2009/07/25
  • "鑄鐵組織與成份對熱導性質之影響研究", 台灣鑄造學會98年度論文發表會, 新竹, 2009/07/25
  • "應用田口法於鎂合金壓鑄製程參數最佳化", 台灣鎂合金協會98年度會員大會及論文發表會, 台北, 2009/06/26
  • "鎂合金濕砂模鑄造法之機械性質探討", 台灣鎂合金協會98年度會員大會及論文發表會, 台北, 2009/06/26
  • "AZ91D鎂合金之熱變形模擬分析", 台灣鎂合金協會98年度會員大會及論文發表會, 台北, 2009/06/26
  • "高蒸氣壓合金真空熔煉技術之研究", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "濕砂模中自由水與結晶水之區分研究", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "利用機械合金法製備原生TiC製程研究", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "熱均壓TiC-420J2 複合鋼材之性質分析", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "鎳鉻鉬合金鋼以鐵鋁合金優化表面之研究", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "燒結密度與ZnO 對ZnS-SiO2 熱震行為之影響", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "大型鎂合金壓鑄件充填過程之數值模擬分析", 台灣鑄造學會97年度大會, 台南, 2008/11/16
  • "AZ91鎂合金應用於濕砂模成型之研究", 台灣鑄造學會97年度大會, 台南, 2008/11/16
  • "不鏽鋼之腐蝕性質", 閥供應鏈實質合作計畫交流會, 台北, 2008/10/22
  • "CrSi合金顯微結構與薄膜電性分析", 中國礦冶工程學會2008年會, 台北, 2008/10/21
  • "雙相不 锈 鋼之材料製程與特性", 閥供應鏈實質合作計畫交流會, 台北, 2008/08/14
  • "物理氣相沉積 PVD", 高中職尖端科技(奈米科技) 種子教師培育計畫, 台北, 2008/07/15
  • "Surface Hardening of Medium Carbon Steels by Aluminization", SEAISI 2008, Bangkok, 2008/05/11
  • "Mechanical Properties of TiC-Strengthened Cr/V Containing Tool Steels", HIP 2008, Huntington Beach, CA, 2008/05/06
  • "ZnS-SiO2燒結密度對介電性質之影響", 中國材料科學學會2007年年會, 新竹, 2007/11/16
  • "以熱均壓法強化複合工具鋼之特性研究", 中國材料科學學會2007年年會, 新竹, 2007/11/16
  • "電致變色氧化鎳釩薄膜光學特性之研究", 中國材料科學學會2007年年會, 新竹, 2007/11/16
  • "鎳鉻鉬合金鋼表面鐵鋁合金硬化處理之研究", 中國礦冶工程學會2007年會, 高雄, 2007/10/26
  • "Thermal and Optical Properties of Nb2O5-AlN Dielectric Layers in 1-4x Dual-Layer BD-R Discs", The International Symposium on Optical Memory (ISOM), Singapore, 2007/10/21
  • "以熱均壓製造TiC強化鉻釩工具鋼之機械性質研究", 2007年海峽兩岸粉末冶金技術研討會, 北京, 2007/09/09
  • "以熱均壓製造TiC強化鉻釩工具鋼之機械性質研究", 中華民國粉末冶金協會96年度專題研討會, 宜蘭, 2007/08/24
  • "以熱均壓製備Cr-Si靶材及其性質之研究", 中華民國粉末冶金協會96年度專題研討會, 宜蘭, 2007/08/24
  • "Effects of Intercritical Treatments on Structures and Properties", SEAISI 2007 東南亞鋼鐵協會年會, Bali, 2007/05/13
  • "440C高鉻不鏽鋼添加TiC微粉以熱均壓法燒結處理之研究", 2006年中華民國材料科學年會, 台南, 2006/12/01
  • "以熱均壓法強化複合工具鋼之特性研究", 中國礦冶工程學會2006年會, 台北, 2006/10/15
  • "Effect of Bi on Crystallization Behavior of a GeSbTeBi Storage Material", Asia-Pacific Data Storage Conference 2006, HSINCHU, 2006/08/28
  • "Optimization of Dielectric Layer Structures in Blue Light Optical Disks", Asia-Pacific Data Storage Conference 2006, HSINCHU, 2006/08/28
  • "Study of Aging Properties in Hot Rolled Low Carbon Steels", SEAISI 2006 東南亞鋼鐵協會35週年會議, 宿霧, 2006/05/15
  • "平面顯示器用高純度鋁濺鍍靶材開發", 2004年中國礦冶工程學會年會, 台南, 2004/12/03

相關證照

  • 民76年冶金工程人員高等考試及格, 考試院
  • 副教授證書, 教育部
  • 助理教授證書, 教育部
  • 技能競賽裁判人才講習, 國際技能競賽中華民國委員會
  • 教授證書, 教育部
回頁首