"The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel", Materials Science and Engineering A, 887, 145744, 2023/11, SCI
"Novel laser powder bed fusion Corrax maraging stainless steel lattice with superior specific strength and energy absorption", Journal of Materials Research and Technology, 25, 5240–5248, 2023/07, SCI
"Revealing the intensified preferred orientation and factors dominating the anisotropic mechanical properties of laser powder bed fusion Ti6Al4V alloy after heat treatment", Journal of Alloys and Compounds, 949, 169494, 2023/07, SCI
"Mechanical behavior of CuZrAl metallic glass scaffolds fabricated by selective laser melting", Materials Letters, 341, 134242, 2023/06, SCI
"The effects of microstructures on the mechanical performances and fracture mechanisms of boron-alloyed ferritic and martensitic stainless steels fabricated by powder metallurgy", Materials Science and Engineering A, 866, 144680, 2023/02, SCI
"Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion", Virtual and Physical Prototyping, 18, 1, e2155197, 2023/01, SCI
"Identification on prior β grain of additive manufactured Ti-6Al-4V alloy using electron backscatter diffraction", Materials Letters, 324, 132758, 2022/10, SCI
"Improved corrosion resistances of powder metallurgy austenitic, ferritic, and martensitic stainless steels by liquid phase sintering", Materials, 15, 5483, 2022/08, SCI
"A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion", Journal of Alloys and Compounds, 910, 164802, 2022/07, SCI
"Mechanical performances of AlN/Al metallized ceramic substrates fabricated by transient liquid phase bonding and pre-oxidation treatment", Ceramics International, 48, 16619–16629, 2022/06, SCI
"Uniaxial compression properties and compression fatigue performance of selective laser melted Ti-6Al-4V cellular structure", Metals and Materials International, 28, 132–144, 2022/01, SCI
"Sintering, microstructure, and mechanical properties of vitrified bond diamond composite", Ceramics International, 47, 33259–33268, 2021/12, SCI
"The microstructure of Fe-based laminated metal composite produced by powder metallurgy", Materials, 14, 6533, 2021/11, SCI
"Wear behavior of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy manufactured by selective laser melting", Materials, 14, 7048, 2021/11, SCI
"Compression deformation and fracture behaviors of laser powder bed fusion Ti-6Al-4V cellular solid during in situ tests", Materials Letters, 303, 130462, 2021/11, SCI
"Promoting the sintering densification and mechanical properties of gas-atomized high-entropy alloy powder by adding boron", Materials Characterization, 179, 111370, 2021/09, SCI
"Mechanical properties and fracture mechanism of boron-containing 304L austenitic stainless steel densified by liquid phase sintering", Materials Science and Engineering A, 814, 141182, 2021/05, SCI
"Intensification of preferred orientation in the additive manufactured Ti-6Al-4V alloy after heat treatment", Materials Letters, 286, 129198, 2021/03, SCI
"Compression property, deformation behavior, and fracture mechanism of additive-manufactured Ti-6Al-4V cellular solid with a new cuboctahedron structure", Metallurgical and Materials Transactions A, 51, 6517–6527, 2020/12, SCI
"Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities", Materials Science and Engineering A, 790, 139695, 2020/07, SCI
"Continuous compression behaviors of selective laser melting Ti-6Al-4V alloy with cuboctahedron cellular structures", Materials Science and Engineering C, 100, 781-788, 2019/07, SCI
"Improved Fatigue Endurance Ratio of Additive Manufactured Ti-6Al-4V Lattice by Hot Isostatic Pressing", Materials and Design, 134, 163-170, 2017/11, SCI
"Liquid phase sintering mechanism and densification behavior of boron-alloyed Fe-Ni-Mo-C-B powder metallurgy steel", Materials and Design,, 133, 536-548, 2017/11, SCI
"Anisotropic Compression Properties of Selective Laser Melted Ti-6Al-4V", Key Engineering Materials, 719, 87-91, 2017/01, EI
"Investigation of the Characteristics of Submicron-Structured Powder-Fabricated Cr50Ni50 Alloys via Different Hot-Press Sintering Pressures", Materials Transactions, 57, 732-737, 2016/05, SCI
"Phase Identification in Boron-Containing Powder Metallurgy Steel using EBSD in Combination with EPMA", Materials Characterization, 113, 90-97, 2016/03, SCI
"The positive effect of hot isostatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti-6Al-4V alloy", Materials Science and Engineering A, 658, 429-438, 2016/03, SCI
"Effects of Particle Size of Pre-Alloy Powders and Vacuum Sintering Temperatures on the Microstructure and Mechanical Properties of 440C Stainless Steel", ISIJ International, 56, 335-340, 2016/02, SCI
"Anisotropy in the impact toughness of selective laser melted Ti-6Al-4V alloy", Materials Science and Engineering A, 650, 295-299, 2016/01, SCI
"Enhancement of the Densification and Mechanical Properties of Aluminum-Doped Zinc Oxide Ceramics by Hot Isostatic Pressing", Journal of Alloys and Compounds, 650, 514-519, 2015/11, SCI
"Preparation and Sintering of Indium-Gallium-Zinc Oxide Ceramics with Different Zinc Oxide Contents", Journal of the European Ceramic Society, 35, 14, 3893-3902, 2015/11, SCI
"Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steel with Chromium and Carbon", Metallurgical and Materials Transactions A, 46, 11, 5285-5295, 2015/11, SCI
"The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", MATEC Web of Conferences, 27, p02010, 5pp., 2015/10, EI
"The Promotion of Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steels by Adding Nickel", MATEC Web of Conferences, 27, p01012, 3pp., 2015/10, EI
"Improving the Electrical Properties of Niobium-Doped Titania Sputtering Targets by Sintering in Oxygen-Deficient Atmospheres", Ceramics International, 41, 7, 8856-8860, 2015/08, SCI
"The Microstructures, Mechanical Properties, and Fracture Behaviors of Metal-Injection Molded 17-4PH Stainless Steel", Metals and Materials International, 21, 3, 531-537, 2015/05, SCI
"The Sintering Trajectory and Electrical Properties of Niobium-Doped Titania Sputtering Targets", Journal of the American Ceramic Society, 98, 1, 163-170, 2015/01, SCI
"The Influences of Carbon and Molybdenum on the Progress of Liquid Phase Sintering and the Microstucture of Boron-Containing Powder Metallurgy Steel", Metallurgical and Materials Transactions A, 46, 1, 467-475, 2015/01, SCI
"The sintering behavior, microstructure, and electrical properties of gallium-doped zinc oxide ceramic targets", Journal of the European Ceramic Society, 34, 15, 3715-3722, 2014/12, SCI
"A Novel Ni-containing Powder Metallurgy Steel with Ultrahigh Impact, Fatigue, and Tensile Properties", Metallurgical and Materials Transactions A, 45, 9, 3866-3875, 2014/08, SCI
"The Fabrication and Characterization of Niobium-doped Titania Ceramic", Key Engineering Materials, 605, -, 11-14, 2014/04, EI
研討會論文
"Mechanical properties and fracture evolution of Corrax lattice structure produced by laser powder bed fusion", 2023 Materials Research Society-Taiwan International Conference (2023 MRSTIC), 新竹, 2023/11/17
"Mechanical Property and Fracture Behavior of Laser Powder Bed Fusion AA8009 Aluminum Alloy Lattice Structure", 2023 Materials Research Society-Taiwan International Conference (2023 MRSTIC), 新竹, 2023/11/17
"The effects of shell printing on the 316L stainless steel fabricated by binder jetting", The 10th International Conference on Mining, Material, and Metallurgical Engineering (MMME'23), London, 2023/08/06
"The effects of building direction and heat treatment on the mechanical properties of additive manufactured maraging stainless steel", 2023 7th International Conference on Materials Engineering and Nano Sciences (ICMENS 2023), Chiba, 2023/04/07
"The effect of bonding process on the bending strength of Al2O3/Al composite substrate", 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC), 台北, 2021/11/13
"Microstructure and mechanical properties of Corrax stainless steel produced by additive manufacturing", 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC), 台北, 2021/11/13
"Microstructure of selective laser melted 316L stainless steel", 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC), 台北, 2021/11/13
"Tensile Strain and Fracture of Ni-Alloyed Powder Metallurgy Steel", The 5th International Conference on Powder Metallurgy in Asia (APMA 2019), Pune, 2019/02/18
"Strain Distribution of Powder Metallurgy Steel during Tensile Testing", Annual Conference on Engineering and Applied Science, 大阪, 2018/11/27
"Compression Fracture Behavior of Additive Manufactured Ti-6Al-4V Porous Material", 2018 World Congress on Powder Metallurgy (WORLDPM2018), 北京, 2018/09/16
"Tensile Property of Boron-Alloyed 304L Stainless Steel", 2018 6th International Conference on Metallurgy Technology and Materials (ICMTM2018), 西安, 2018/05/30
"Microstructure and Sintering of Boron-Alloyed Martensitic Stainless Steel", 19th International Conference on Microstructure and Materials Properties (ICMMP 2017), 東京, 2017/11/13
"Effects of Porosity on Fatigue Property of Selective Laser Melted Ti-6Al-4V Porous Material", IUMRS International Conference in Asia (IUMRS-ICA) 2017, 台北, 2017/11/05
"The Microstructure and Texture of Selective Laser Melted Ti-6Al-4V Alloy", International Conference on Mining, Material, and Metallurgical Engineering, 北京, 2017/07/15
"The Effect of Heat Treatment on the Impact Toughness of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
"Liquid Phase Sintering of Boron-Alloyed Powder Metallurgy Steel with Nickel", 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
"Liquid Phase Sintering of Boron-Alloyed Powder Metallurgy Stainless Steel", 19th International Conference on Chemical, Material, Metallurgical Engineering and Mine Engineering, 東京, 2017/03/27
"Anisotropic Compression Properties of Selective Laser Melted Ti-6Al-4V", 2016 International Conference on Advanced Materials Research and Manufacturing Technologies (AMRMT 2016), 新加坡, 2016/08/18
"Surface roughness of Ti-6Al-4V alloy prepared by selective laser melting", 2016 International Symposium on Material Science and Technology (ISMST 2016), Seoul, 2016/05/12
"The Influences of Ni alloying methods on the Sintered Density of Boron-alloyed Powder Metallurgy Steel", 2016 2nd International Conference on Chemical, Metallurgy and Environmental Engineering (CMAEE-16), Kyoto, 2016/04/12
"The Promotion of Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steels by Adding Nickel", 2015 4th International Conference on Engineering and Innovative Materials (ICEIM), Penang, 2015/09/03
"The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", 2015 4th International Conference on Engineering and Innovative Materials (ICEIM), Penang, 2015/09/03
"Anisotropic Thermal and Electrical Conductivities of 3D-printed Ti-6Al-4V Alloy", The 13th World Conference on Titanium 2015, San Diego, 2015/08/16
"The Mechanical Properties of Metal-Injection Molded 17-4PH Stainless Steels with Different Delta-Ferrite Contents", 2015 Spring International Conference on Material Sciences and Technology (MST-S), 北京, 2015/04/14
