:::

雷射微奈米加工實驗室Laser Micro Nano-Fabrication Lab系所:製造科技研究所 / 指導教授: 張元震 教授 / 實驗室位置: 綜合科館B01-1 / 分機: 2050

:::

學術期刊論文 (Journal Papers)

  1. H. K. Lin, S. -J. Yang, P. -W. Chang, W. -H. Lu, Y. J. Chang, "Effects of Laser Patterning and Heat Treatment on Hydrophobicity, Wear, and Corrosion Resistance of 316L Stainless Steel," The International Journal of Advanced Manufacturing Technology , 2025  https://doi.org/10.1007/s00170-025-15487-x  (SCIE, IF=2.9, 2023))
  2. Y. J. Chang, C. -S Wang, G. Siva Durga Manikanta, Y. -H. Hsiao, "Laser Induced Plasma Detection for Laser Percussion Drilling of Stainless Steel and CoCrMo Alloy," Sensors and Materials, Vol. 37, No. 1, pp. 93-104, 2025. 
  3. Y. J. Chang, C.-S. Wang, Y.-H. Hsiao, S. D. M. Gurajala, "Feedback-control based Laser Micromachining with Real-time Plasma Detection and Neural Networks," Optics and Lasers Technology, Vol. 180, 111500, 2025.
  4. Yuan-Jen Chang, Chau-Shing Wang, Huan-Yu Chang, Yang-Hung Hsiao, "Laser Percussion Drilled Blind Hole Depth and Diameter Monitoring with Laser-induced Plasma Detection ," Laser in Engineering, Vol. 53, Issue 1-3, P. 89-104, 2024. (SCIE, IF=0.753, 2023)
  5. H. K. Lin, Y. C. Chen, J. R. Lee, W. H. Lu, Y. J. Chang, "Surface resonance properties of thin silver films with nanoparticles induced by pulsed-laser interference dewetting process," The International Journal of Advanced Manufacturing Technology, Vol. 120, pp. 377-384,  2022. (SCIE, IF= 3.226, 2020)
  6. Chau-Shing Wang, Yang-Hung Hsiao, Huan-Yu Chang, Yuan-Jen Chang , " Process Parameter Prediction and Modeling of Laser Percussion Drilling by Artificial Neural Networks ," Micromachines, Vol. 13, 2022, 529. (SCIE, IF= 2.891, 2020)
  7. Yuan-Jen Chang, Yong-Xiang Chang, "Novel Laser Micro-texturing on Silicon with Liquid Lenses by Breath Figure Method," Microsystem Technologies, Vol. 27, 2021, pp. 2903-2912 (SCI, IF= 1.737, 2019)
  8. Yuan-Jen Chang, Shih-Han Chou, Chao-Ching Ho, Jin-Chen Hsu, Chia-Lung Kuo, "Nanosecond Laser Direct Submicron-scale Texturing with Breath Figure Method," Microsystem Technologies, Vol. 26, 2020, pp.2137-2142 (SCI, IF= 1.737, 2019)
  9. Yuan-Jen Chang, Chih-Yuan Wang, Jin-Chen Hsu, Chao-Ching Ho, and Chia-Lung Kuo, "Real-time Laser-induced Plasma Monitoring in Percussion Pulsed Laser Material Processing," Measurement, Vol. 135, 2019, pp. 905-912 (SCIE, IF= 2.218, 2017) 
  10. Chao-Ching Ho, Yuan-Jen Chang, Jin-Chen Hsu, Chia-Lung Kuo, and Fu-Chen Huang, "Experimental Investigation of Thermal Strain Caused by Electrical Discharge Machining on Stainless Steel SUS430," Sensors and Materials, Vol. 29, No. 11, 2017, pp.1615-1623 (SCIE, IF=0.519, 2016)
  11. Chao-Ching Ho, Dung-Sheng Wu, Yuan-Jen Chang, Jin-Chen Hsu, Chia-Lung Kuo, Shih-Kang Kuo, "Experimental Investigation of Speckle Pattern by Laser Scribing for Digital Image Correlation," Journal of Laser Micro Nanoengineering, Vol. 12, No. 2, 2017, pp.97 (SCI, IF=0.763, 2016)
  12. Chao-Ching Ho, Ke-Ying Shen, Chang-Sheng  Chen, Yuan-Jen  Chang, Jin-Chen  Hsu, Chia-Lung  Kuo, "Swirling gas jet assisted laser percussion drilling for galvanometer scanned CO2 laser," Applied Sciences, Vol. 7, No. 5,2017, 502 (SCI, IF=1.726, 2015) doi:10.3390/app7050502
  13. Y. J. Chang, Y. C. Hung, C. L. Kuo, J. C. Hsu, C. C. Ho, "Hybrid stamping and laser micromachining process for micro-scale hole drilling," Materials and Manufacturing Processes, Vol. 32, No. 15, pp. 1685-1691, 2017  (SCIE, IF=1.419, 2015)
  14. Y. J. Chang and J. M. Liao, "Fabricationof Sub-100 nm h-PDMS Tip Array for Tip-based Nanolithography by Electrochemical Machining," Microsystem Technologies, Vol. 23, No. 5, pp. 1361-1366, 2017 (SCI, IF=0.875, 2014) (DOI: 10.1007/s00542-016-2883-6)
  15. Chao-Ching Ho, Yuan-Jen  Chang, Jin-Chen Hsu, Chia-Lung Kuo, and Guan-Hong Lee, "Characteristics of the Thermal Strain of Gas Jet- assisted Laser Percussion Drilling," Sensors and Materials, Vol.28, No. 9, pp.1067-1075, 2016. (SCIE, IF=0.45, 2015)
  16. Chao-Ching Ho, Yuan-Jen  Chang, Jin-Chen Hsu, Chia-Lung Kuo, Shih-Kang Kuo, and Guan-Hong Lee, "Residual Strain Measurement Using Wire EDM and DIC in Aluminum," Inventions, 1(1), 4, 2016 (DOI:10.3390/inventions1010004)
  17. Y. C. Hung, Y. J. Chang, C. L Kuo, J. C. Hsu, and C. C. Ho, "Comparison between Laser and Stamping without Die(SWD)for micro tapered hole forming," Applied Sciences, vol. 6, No. 3, 77, 2016 (SCI, IF=1.484, 2014)
  18. Y. J. Chang, C. H. Chang, C. C. Ho, J. C. Hsu, and C. L. Kuo, "Droplet-Assisted Laser Direct Nanoscale Writingon Silicon," Technologies,4(1), 8 2016.
  19. C.-C. Ho, Y.-H. Luo, Y.-J. Chang, J.-C. Hsu, and C.-L. Kuo, "Mask-assisted Laser Percussion Drilling," Journal of Laser Micro/Nanoengineering, Vol. 11, No. 1, pp.41-45, 2016. (SCI, IF=0.731, 2014) (DOI: 10.2961/jlmn.2016.01.0008)
  20. C.-C. Ho, Y.-J. Chang, J.-C. Hsu, C.-M. Chiu and C.-L. Kuo, "Optical emission monitoring for defocusing laser percussion drilling," Measurement,  vol. 80, pp.251-258, 2016. (SCI, IF=1.484, 2014)
  21. Chao-Ching Ho, Guan-Ru Tseng, Yuan-Jen Chang, Jin-Chen Hsu, and Chia-Lung Kuo,"Laser percussion drilling of highly reflective metals with external interdigital electrodes", Precision Engineering,  vol 43, pp. 43–51, 2016. (SCI, IF=1.517, 2014)
  22. Chao-Ching Ho, Yan-Min Chen, Jin-Chen Hsu, Yuan-Jen Chang, and Chia-Lung Kuo, "Characteristics of the effect of swirling gas jet assisted laser percussion drilling based on machine vision," Journal of Laser Applications, vol. 27, p. 042001, 2015. (SCI, IF = 1.338)
  23. Yuan-Jen Chang, Chao-Ching Ho, Jin-Chen Hsu, Tseng-Yao Hwang, and Chia-Lung Kuo, "Atmospheric Dual-Laser Deposited Dielectric Coating on Electrodes for Electrochemical Machining," Journal of Material Processing Technology,Vol. 226, pp.205-213, 2015 (SCI, IF=2.236, 2012)
  24. Jin-Chen Hsu, Yuan-Jen Chang, Chao-Ching Ho, and Chia-Lung Kuo, "Continuous-Wave Laser Drilling Assisted by Intermittent Gas Jets," Journal of Advance Manufacturing Technology, Vol. 79, No. 1-4, pp.449-459, 2015 (SCI, IF=1.78, 2013)
  25. Yuan-Jen Chang, Han-Kuan Huang, "Parallel Multi-step Nano-lithogrpahy by Nano-scale Cu-covered h-PDMS Tip Array," Journal of Micromechanics and Microengineering, Vol. 24, 095022, 2014 (SCI, IF=1.790, 2012)
  26. Chao-Ching Ho, Guan-Ru Tseng, Yuan-Jen Chang, Jin-Chen Hsu, and Chia-Lung Kuo, "Magnetic-field-assisted Laser Percussion Drilling," International Journal of Advanced Manufacturing Technology, vol. 73, pp. 329-340, 2014.(SCI, IF=1.205, 2012)
  27. C.-C. Ho, C.-M. Chiu, Y.-J. Chang, J.-C. Hsu, C.-L. Kuo, "On-line depth measurement for laser-drilled holes based on the intensity of plasma emission", Measurement Science and Technology,vol.25, pp.094007, 2014(SCI, IF=1.435, 2012)
  28. C.-C. Ho, C.-M. Chiu, Y.-J. Chang, J.-C. Hsu, and C.-L. Kuo, "Phase-controlled vibrational laser percussion drilling," Journal of Vibroengineering,vol. 16, no. 4, pp. 1672-1678, 2014. (SCI)
  29. Chao-Ching Ho, Guan-Ru Tseng, Yuan-Jen Chang, Jin-Chen Hsu, and Chia-Lung Kuo, "Magnetic Assisted Laser Percussion Drilling,"Applied Mechanics and Materials, Vol. 479-480,  pp.299-303, 2014.(EI)
  30. J.-C Hsu, C.-Y, Liao, C.-C. Ho, Y.-J. Chang, and C.-L Kuo, "Experiment on Intermittent Gas Jet Assisted Modulated Fiber Laser Drilling," Applied Mechanics and Materials, Vol. 479-480,  pp.91-95, 2014. (EI)
  31. Chao-Ching Ho, Guan-Ru Tseng, Yuan-Jen Chang, Jin-Chen Hsu, andChia-Lung Kuo, "External Electric Field-Assisted Laser Percussion Drilling for Highly Reflective Metals," Advances in Mechanical Engineering, 156707, 2013 (SCI, IF=1.062)
  32. Y. J. Chang, Guan-Ru Tseng, Chao-Ching Ho, Jin-Chen Hsu, and Chia-Lung Kuo, “Detection of Laser Induced Plasma with Interdigital Electrodes in Laser Material Processing,” Optics and Lasers in Engineering, Vol. 51, 2013, pp. 1199-1205. (SCI, IF=1.838) (2011 Rank=25/79, Optics)
  33. Chao-Ching Ho, Jin-Chen Hsu, Yuan-Jen Chang, Chia-Lung Kuo, Jun-Jia He, "Monitoring and breakthrough control of laser drilled holes by means of Machine Vision," Transactions of the Canadian Society for Mechanical Engineering, Vol. 37, N0. 3, 2013, pp.355-363 (SCI, IF=0.228) (2011 Rank=116/122, Mechanical)
  34. Y. J. Chang, D. Y. Liu, and C. L. Kuo, "Fabrication of TiN-based Three Terminal Nano Mechanical Relays using Nanoimprint Technology," Microsystem Technologies, Vol.19, 2013, pp.537-545. (SCI, IF=0.931)(2011 Rank=135/245, Engineering)
  35. C.-C. Ho, J.-C. Hsu, Y.-J. Chang, C.-L Kuo, and J.-J. He, "Real-time Breakthrough Detection for Laser Drilling Based on Coaxial Visual Sensing Technology," Applied Mechanics and Materials, Vols.284-287, 2013, pp.2281-2285.(EI)
  36. 王永成,張元震, 徐力弘, 鄭英毅, 張中平, "奈米級振動檢測系統", Journal of Machinery Manufacturing and Automation, Vol.1, No.1, 2012, pp.37-46. (EI)
  37. Yuan-Jen Chang, Chia-Lung Kuo, and Nai-Yu Wang, "Magnetic Assisted Laser Micromachining for Highly Reflective Metals," Journal of Laser Micro/Nano Engineering, Vol. 7, No. 3, 2012, pp.254-259 (SCI, IF=0.556) (2011 Rank=179/232, Nanotechnology)
  38. D. Seghete, B. D. Davidson, R. A. Hall, Y. J. Chang, V. M. Bright, S. M. George, 2009, Sacrificial layers for air gaps in NEMS using alucone molecular layer deposition, Sensors and Actuators A – Physical, Vol.155, No.1, pp.8-15. (SCI, IF=1.802)(2011 Rank=56/245 Engineering)
  39. Y. J. Chang, J. M. Gray, A. Imtiaz, D. Seghete, T. Mitch Wallis, S. M. George, P. Kabos, C. T. Rogers, V. M. Bright, 2009, Micromachined Resonators of High Q-Factor Based on Atomic Layer Deposited Alumina, Sensors and Actuators A – Physical, Vol.154, No.2, pp.229-237. (SCI)
  40. A.D. Laws, Y.J. Chang, V.M. Bright, Y.C. Lee, 2008, Thermal Conduction Switch for Thermal Management of Chip Scale Atomic Clocks, Journal of Electronic Packaging, Vol.130, No.2, pp.021011. (SCI, IF=0.694) (2011 Rank=162/245, Engineering)
  41. Y.J. Chang, K. Mohseni, V.M. Bright, 2007, Fabrication of Tapered SU-8 Structure and Effect of Sidewall Angle for A Variable Focus Microlens using EWOD, Sensors and Actuators A – Physical, Vol.136, No.2, pp.546-553.  (SCI, IF=1.802)(2011 Rank=56/245 Engineering)
回頁首