"Attention-based integrated deep neural network architecture for predicting the effectiveness of data center power usage", International Journal of Thermofluids, 24, 100866, 2024/11, SCI
"Design of an innovative flow isolation device (FID) as an air flow barrier to control the temperature of large storage areas in cold room applications", International Journal of Thermofluids, 23, 100778, 2024/08, SCI
"Review–Recent developments on applying acoustic waves for efficiency improvements of different thermofluids systems", International Journal of Thermofluids, 22, 100614, 2024/05, SCI
"An innovative double-jet design as an air flow barrier to isolate temperature and humidity in a low-temperature storage room", International Journal of Thermofluids, 22, 100650, 2024/05, SCI
"Energy Consumption and Carbon Emission Reduction in HVAC System of a Dynamic Random Access Memory (DRAM) Semiconductor Fabrication Plant (fab)", IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 2, 37, 174-184, 2024/05, SCI
"Visually activated sprinklers applied in atria to mitigate the interaction of water spray with the smoke layer", Case studies in thermal engineering, 51, 103517, 2023/11, SCI
"Evaporative cooling method to improve energy management of overhead downward flow-type data center", Case studies in thermal engineering, 45, 102998, 2023/05, SCI
"Optimized design on the thermohydraulic performance of the helical coil heat exchanger", International Journal of Thermofluids, 17, 100271, 2023/01, SCI
"Optimized deep learning-based prediction model for chiller performance prediction", Data & Knowledge Engineering, 144, 102120, 2023/01, SCI
"A Numerical Study on the Effects of Purge and Air Curtain Flow Rates on Humidity Invasion Into a Front Opening Unified Pod (FOUP)", IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 35, 4, 670-679, 2022/11, SCI
"Large scale PIV-measurement to evaluate the flow isolation device (FID) efficiency in the stocker room of wafer masks", International Journal of Thermofluids, 16, 100223, 2022/10, SCI
"Energy saving for an air conditioning system applied in a thin-film-transistor liquid-crystal display (TFT LCD) high-tech fabrication plant (Fab)", International Journal of Thermofluids, 16, 100210, 2022/09, SCI
"The effects of surface modification on aerodynamic characteristics of airfoil DU 06 W 200 at low Reynolds numbers", International Journal of Thermofluids, 16, 100208, 2022/09, SCI
"A comparative study of a front opening unified pod (FOUP) moisture removal efficiency with different purging gases", International Journal of Thermofluids, 16, 100198, 2022/08, SCI
"Optimal thermohydraulic design of the indoor unit of a split-type air conditioner", Applied Thermal Engineering, 211, 118502, 2022/07, SCI
"Numerical and experimental investigations on thermal management for data center with cold aisle containment configuration", Applied Energy, 307, 118213, 2022/02, SCI
"Thermohydraulic and Condensing Phase-Change Analysis within the Indoor Unit of a Split-Type Air-Conditioner", Case Studies in Thermal Engineering, 21, 100714, 2020/10, SCI
"The model development and case study for transient thermal response of the human body interacting with the coupled fabric-environment system", Case Studies in Thermal Engineering, 18, 2020/04, SCI
"Impact of an oscillating guide vane on the thermo-hydraulic fields in a square cavity with single inlet and outlet ports", International Journal of Heat and Mass Transfer, 128, 1184-1200, 2019/01, SCI&EI
"The Effect of Viscous Dissipation on Heat Transfer in Cavities with Varing Shape Due to an Inner Rotating Circular Cylinder", Numerical Heat Transfer, Part A: Applications, 68, 150-173, 2015/03, SCI
"Filling-box process during solidification of a liquid hypoeutectic binary solution", International Communications in Heat and Mass Transfer, 53, 56-63, 2014/04, SCI
"Investigation of flow and heat transfer around internal channels of an air ventilation vest", Textile Research Journal, 4, 84, 399-410, 2014/03, SCI
"The Impact of an Air-Supply Guide Vane on the Indoor Air Distribution", World Academy of Science, Engineering and Technology, 77, 365-369, 2013/05, EI
"Suppressing freckles during solidification due to periodic motion of top liquid layer", Applied Thermal Engineering, 50, 1055-1069, 2013/01, SCI
"THE IMPACT OF DIFFERENTIAL WALL TEMPERATURES ON THE TRANSPORT PHENOMENADURING THE SOLIDIFICATION OF A SUPER-EUTECTIC BINARY SOLUTION", Journal of Enhanced Heat Transfer, 2, 19, 179-190, 2012/06, SCI
"The Obstacle Effect to the Mixing Efficiency in X-Shaped Micro Channel", International Journal of Earth Sciences and Engineering, 4, 5, 513, 2012/06, SCI
"Solidification of a Liquid Super-Eutectic Binary Alloy", Experimental Heat Transfer, 4, 24, 335-354, 2011/09, SCI
"Using Air Curtain to Control Pollutant Spreading for Emergency Management in a Cleanroom", Building and Environment, 5, 46, 1104-1114, 2011/05, SCI
"Particle Deposition on a 300 mm Wafer Moving in the Opposite Direction of the Airflow in a Uni-directional Cleanroom", Aerosol and Air Quality Research, 10, 316-322, 2010/06, SCI
"Experimental Performance Investigation of Ventilation Schemes in a Private Bathroom", Building and Environment, 45, 243-251, 2010/01, SCI
"PIV Study on Double-diffusive Convection during the Unidirectional Solidification of a Hypereutectic Binary Solution", Journal of Enhanced Heat Transfer, 4, 16, 387-402, 2009/12, SCI
"Periodic Fluid Flow and Heat Transfer in a Square Cavity Due to an Insulated or Isothermal Rotating Cylinder", ASME, Journal of Heat Transfer, 11, 131, 111701-1~11, 2009/11, SCI
"PIV Study on the Development of Double-diffusive Convection during Solidification Effected by Lateral Cooling for a Super-eutectic Binary Solution", Applied Thermal Engineering, 14, 29, 2773-2782, 2009/10, SCI
"Numerical Study on the Dispersion of Airbone Contaminants from an Isolation Room in the Case of Door Opening", Applied Thermal Engineering, 29, 1544-1551, 2009/06, SCI
"Dynamic Analysis on Particle Concentration Induced by Opening the Door of a Front Opening Unified Pod (FOUP) that Loaded with 25 Pieces of 300 mm Wafer Manufacturing Processes", Aerosol and Air Quality Research, 1, 9, 139-148, 2009/03, SCI
"Numerical Study of Solidification around Staggered Cylinders in a Fixed Space", Numerical Heat Transfer, Part A: Applications, 48, 3, 239-260, 2005/08, SCI
"隔離病房動態氣流模擬分析", 潔淨科技, 33-40, 2005/06, ELSE1
"Heat Transfer Characteristics of Solidification around Staggered Cylinders in a Fixed Volume", Journal of Enhanced Heat Transfer, 12, 2, 203-224, 2005/04, SCI
"Unidirectional Solidification Process of a Binary Solution Saturating Porous Media", Transactions of the Aeronautical and Astronautical Society of the Republic of China, 37, 1, 91-100, 2005/01, EI
"Numerical Study of the Effect of Rotational Speeds on the Similarity Law for the Cross Flow Fan of the Split-Type Air-Conditioner", ASHRAE Transactions, 110, 2, Paper no. 4370, 2004/12, EI
"Numerical Study of Heat Transfer Performance on the Air Side of Evaporator for a Domestic Refrigerator", Numerical Heat Transfer, Part A: Applications, 44, 8, 851-870, 2003/12, SCI
"Numerical Study of Transient Thermal Ablation of High-Temperature Insulation Materials", AIAA, Journal of Thermophysics and Heat Transfer, 17, 1, 53-61, 2003/01, SCI
"Solidified Layer Growth and Decay Characteristics During Freeze Coating of Binary Substance", AIAA, Journal of Thermophysics and Heat Transfer, 16, 3, 379-388, 2002/07, SCI
Conference papers
"Analyzing Heat Transfer Between the Human Body and the Environment Using Thermal Quadrupole Method", 21st JSRAE Annual Conference, 2024/09/04
"NUMERICAL SIMULATION ON THE THERMOHYDRAULIC PERFORMANCE FOR A PLAIN FIN-AND-TUBE HEAT EXCHANGER", 11th Asian Conference on Refrigeration and Air Conditioning, 2024/04/21
"Research on thermal management of a data center using digital twin technology", 11th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2024/04/21
"Enhancing Data Center Power Efficiency Prediction with an Attention-Based Integrated Deep Neural Network Architecture", 2023 JSRAE Conference, 東京, 2023/09/06
"The Impact of Different Server Arrangements and Different Heat Loads on the Performance of a Data Center", 2023 JSRAE Conference, 東京, 2023/09/06
"Healthy and Energy-saving Design in a University Library", 8th Thermal and Fluids Engineering Conference, Maryland, 2023/03/26
"The Evaluation of the Wind Loads on a Wind Turbine under Different Wind Conditions", 8th Thermal and Fluids Engineering Conference, Maryland, 2023/03/26
"Optimization of Cabinet Configuration in a Data Center", 14th International Conference on Applied Energy, Bochum, 2022/08/08
"The Case Study of Evaporative Cooling in a Data Center", The 10th Asian Conference on Refrigeration and Air-conditioning, Chongqing China 2022, 2022/04/08
"Numerical Study on the Optimal Hydraulic Design for the Indoor unit of a Split-Type Air-conditioner", International Conference on Applied Energy 2021, 曼谷, 2021/11/29
"A study on the feasibility of convective cooling for underground high voltage power transmission cable culverts", International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics HEFAT2021, Amsterdam, 2021/07/26
"The Development of the Optimized Casing Shape with Superior Hydraulic Performance for a Split-Type Air-Conditioner", 2019 JSRAE Annual Conference, 東京, 2019/09/11
"Periodic Fluid Flow and Heat Transfer in a Square Cavity Due to an Eccentric Rotating Cylinder", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"The CFD-Based Optimal Design for the Air-to-Air Fixed Plate Membrance Heat Exchanger", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"The Optimal Thermo-Hydraulic Design for the Indoor Unit of a Split-Type Air-Conditioner", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"Numerical Study on the Droplet Separation Efficiency for the Spiral Liquid-Vapor Separation Device in a Falling Film Evaporator", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"The Optimal Thermo-Hydraulic Design for the Data Center by Using the Taguchi Method", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"THE ENERGY-SAVING EFFECT OF INSTALLING A HEAT RECOVERY VENTILATIOR ON A RESIDENCE HOUSE", The 9th Asian Conference on Refrigeration and Air-conditioning, Sapporo, 2018/06/10
"Heat and Mass Transfer within the Indoor Unit of a Split-Type Air-Conditioner", The 9th Asian Conference on Refrigeration and Air-conditioning, Sapporo, 2018/06/10
"A NUMERICAL STUDY OF HEAT AND MOISTURE TRANSPORT AROUND A STANDING HUMAN BODY IN A ROOM", The 9th Asian Conference on Refrigeration and Air-conditioning, Sapporo, 2018/06/10
"The Comparison of Heat Transfer Performance between Helical Coil Heat Exchanger and Wrap-Around Coil Heat Exchanger", 2016 JSRAE Annual Conference, 神戶, 2016/09/07
"A Study on the Optimal Performance of R410A Vapor Compression Cycle by Taguchi Method", The 8th Asian Conference on Refrigeration and Air Conditioning, 台北市, 2016/05/15
"PERFORMANCE STUDY OF A COMPACT HEAT EXCHANGER WITH FIN-TUBE CORE", The 8th Asian Conference on Refrigeration and Air Conditioning, 台北市, 2016/05/15
"Numerical Study of the Thermo-Hydraulic Field within an Indoor Unit of the Small-Sized Split-Type Air-Conditioner", 2015 JSRAE Annual Conference, 東京, 2015/10/20
"The Impact of an Oscillating Air-Supply Guide Vane on the Thermo-Hydraulic Field in a Square Cavity with Single Inlet and Outlet Ports", ICR 2015, 橫濱, 2015/08/16
"A COMPARATIVE STUDY ON THE OPTIMUM PERFORMANCE OF R410A AND R32 REFRIGERATION CYCLES", ICR 2015, 橫濱, 2015/08/16
"COIL SIDE HEAT TRANSFER CHARACTERISTICS STUDY FOR A HELICAL-COIL HEAT EXCHANGER", ICR 2015, 橫濱, 2015/08/16
"An Experimental Study on the Optimal Performance of R410A Vapor Compression Cycle", The 10th International Green Energy Conference, 台中市, 2015/05/24
"Numerical Study of Similarity Laws for the Cross Flow Fan", International Congress on Natural Sciences and Engineering, 京都, 2015/05/07
"An Experimental Study of Thermosolutal Convection during", 2014 JSRAE Annual Conference, 佐賀, 2014/09/10
"THE THEORETICAL STUDY OF OPTIMAL PERFORMANCE FOR R290 REFRIGERATION CYCLE BY USING TAGUCHI METHOD", 11th IIR Gustav Lorentzen Conference on Natural Refrigerants, 杭州, 2014/08/31
"Numerical Study of Heat and Moisture Transfer in a Human Body-Clothing-Environment System", The 7th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2014/05/18
"PERFORMANCE ANALYSIS OF R32 REFRIGERATION CYCLE BY USING TAGUCHI METHOD", The 7th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2014/05/18
"TIME-VARYING FLOW CHARACTERISTICS OF A CROSS-FLOW FAN", The 7th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2014/05/18
"The Impact of Periodic Vibration in Vertical Direction on the Development of Double-Diffusive Convection of a Liquid Binary Alloy during the Unidirectional Solidification Process", The 6th Asian Conference on Refrigeration and Air Conditioning, 西安, 2012/08/26
"The Evaluation of Moisture Management Fabrics", The Fiber Society, 2012/05/23
"Solidification of a Liquid Hypo-Eutectic Binary Alloy in an Enclosure with a Side Cooling Wall", ICFMHTT 2012 - International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, 蘇黎士, 2012/01/15
"FLUID FLOW AND ENTROPY GENERATION CHARACTERISTICS ANALYSIS OF THE CHANNEL GEOMETRY IN X-SHAPED MICRO-CHANNELS", Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference, Hamamatsu, Shizuoka, 2011/07/24
"A STUDY Of HEAT AND MOISTURE TRANSPORT ON THE HUMAN BODY-CLOTHING-ENVIRONMENT SYSTEM BY USING A THERMAL MANIKIN", XIV International Conference on Environmental Ergonomics, Nafplio, 2011/07/10
"THE COMPARISON OF THE EVALUATION METHODS FOR MOISTURE MANAGEMENT FABRICS", XIV International Conference on Environmental Ergonomics, Nafplio, 2011/07/10
"The Impact of Converging and Diverging Angle on the X-shaped Micro-Channels", Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, 2011/03/13
"A NUMERICAL STUDY ON THE AIRFLOW DISTRIBUTION WITHIN A NEGATIVE-PRESSURE ISOLATION ROOM", International Symposium on Contamination Control 2010, 東京, 2010/10/05
"The Effect of Periodic Lid-driven Flow on Suppressing the Double-diffusive Convection during Solidification of a Liquid Binary Alloy", The 5th Asian Conference on Refrigeration and Air-conditioning, 東京, 2010/06/07
"Periodic Fluid Flow and Heat Transfer in A Square Cavity due to an Insulated or Isothermal Rotating Rectangular Object", ASME Summer Heat Transfer Conference, 舊金山, 2009/07/19
"AIRFLOW SIMULATION WITHIN A POSITIVE-PRESSURE ISOLATION ROOM", Roomvent 2009, 釜山, 2009/05/24
"The Impact of Periodic Forced Convection on the Double-diffusive Convection of a liquid Binary Alloy during the Unidirectional Solidification Process", The 4th Asian Conference on Refrigeration and Air-conditioning, 台北市, 2009/05/21
"Experimental Study on the Development of Double-diffusive Convection during the Solidification Process of a Liquid Binary Alloy", The 4th Asian Conference on Refrigeration and Air-conditioning, 台北市, 2009/05/21
"Transient Leading to Periodic Fluid Flow and Heat Transfer in a Differentially-Heated Cavity due to an Insulated Rotating Object", 2007 ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, 2007/07/08
"Transient Leading to Periodic Fluid Flow and Heat Transfer in a Cavity with Constant Temperature Walls due to an Isothermal Rotating Object", 2007 ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, 2007/07/08
