按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

KAI-YING CHEN

TITLE：
Professor／Department of Industrial Engineering and Management
REACH OUT：

Journal articles

  • "Knowledge Development Trajectories of Intelligent Video Surveillance Domain: An Academic Study Based on Citation and Main Path Analysis", sensors, 24, 1, 2240, 2024/03, SCI
  • "Knowledge Development Trajectories of the Cybercrime Identi-fication Domain: An Academic Study Based on Citation and Main Paths Analysis", International Journal of Latest Research in Engineering and Technology, 9, 8, 1-15, 2023/08, ELSE2
  • "Knowledge Development Trajectory of the Internet of Vehicles Domain Based on Main Path Analysis", Sensors, 23, 6120, 2023/07, SCI
  • "The Academic Development Trajectories and Applications of Flexible Manufacturing Systems Based on Main Path Analysis Method", Processes, 11, 1297, 2023/04, SCI
  • "以主路徑分析法探討設計思考之發展趨勢", 科技管理學刊, 27, 2, 27-62, 2022/09, TSSCI
  • "Knowledge Development Trajectories of Crime Prevention Domain: An Academic Study Based on Citation and Main Path Analysis", International Journal of Environmental Research and Public Health, 19, 10616-10625, 2022/08, SCI
  • "The Academic Development Trajectories of the Lean Production Based on Main Path Analysis Method", Processes, 10, 1495, 2022/07, SCI
  • "Knowledge Development Trajectories of the Radio Frequency Identification Domain: An Academic Study Based on Citation and Main Paths Analysis", Applied Sciences, 11, 1, 8254, 2021/09, SCI
  • "A Geometric Mean-based DEMATEL Model for Evaluating the Critical Challenges of Spare Parts Planning", Journal of Internet Technology, 21, 1, 121-133, 2020/01, SCI
  • "A Novel FMEA Model Based on Rough BWM and Rough TOPSIS-AL for Risk Assessment", Mathematics, 7, 10, 874-, 2019/09, SCI
  • "Application of the Analytic Hierarchy Process and Grey Relational Analysis for Vendor Selection of Spare Parts Planning Software", Symmetry, 11, 9, 1182-, 2019/09, SCI
  • "Preventing Tire Blowout Accidents: A Perspective on Factors Affecting Drivers’ Intention to Adopt Tire Pressure Monitoring System,", Safety, 4, 2, 2018/04, ELSE2
  • "Factors affecting adoption of smart meters in the post-Fukushima era in Taiwan: an extended protection motivation theory perspective", BEHAVIOUR & INFORMATION TECHNOLOGY, 36, 9, 955-969, 2017/08, SSCI
  • "應用動態重視度表現值分析法評估醫療資訊 系統之可用性", 管理與系統, 22, 4, 487-508, 2015/10, SSCI
  • "The application of an artificial immune system-based back-propagation neural network with feature selection to an RFID positioning system", Robotics and Computer-Integrated Manufacturing, 29, 6, 431-438, 2013/12, SCI
  • "User acceptance of ‘near field communication’ mobile phone service: an investigation based on the ‘unified theory of acceptance and use of technology’ model", The Service Industries Journal, 33, 6, 609-623, 2013/01, SSCI
  • "Design and Development of Cold Chain Monitoring System", Advances in Information Technology and Applied Computing, １, 213-217, 2012/11, ELSE2
  • "Cell controller design for RFID based flexible manufacturing systems", International Journal of Computer Integrated Manufacturing, 25, 1, 35-50, 2012/01, SCI
  • "Applying Analytic Network Process in Logistics Service Provider Selection – A Case Study of the Industry Investing in Southeast Asia", International Journal of E-Business and Management, 9, 1, 22-35, 2011/03, EI
  • "Using SVM Based Method for Equipment Fault Detection in a Thermal Power Plant", Computers in Industry, 62, 1, 42-50, 2011/01, SCI
  • "Applying Back Propagation Network to Cold Chain Temperature Monitoring", Advanced Engineering Informatics, 25, 1, 11-22, 2011/01, SCI
  • "Applying Multi-agent Technique in Multi-section Flexible Manufacturing System", Expert Systems with Applications, 37, 7310-7318, 2010/11, SCI
  • "應用代理人技術於面板廠瑕疵修護線之設計", 機械工業雜誌, 328, 75-86, 2010/07, ELSE1
  • "Development of collaborative transportation management framework with Web Services for TFT–LCD supply chains", International Journal of Computer Integrated Manufacturing, 23, 1, 1-19, 2010/01, SCI
  • "A Web Services Based Collaborative Planning, Forecasting and Replenishment (CPFR) Framework for Managing Spare Parts of Semiconductor Equipment", IEEE Transactions on Semiconductor Manufacturing, 22, 4, 1-6, 2009/11, SCI
  • "Applying RFID Hand-Held Device for Factory Equipment Diagnosis", IEEE International Conference on Systems, man and Cybernetics, 2009/10, EI
  • "Agent-Based Control Framework for Mass Customization Manufacturing with UHF RFID Technology", IEEE System Journal, 3, 3, 343-359, 2009/09, ELSE2
  • "Designing Data Warehouse for Equipment Management System Based on Genetic Algorithms", International Journal of Production Research, 46, 21, 6113-6135, 2008/11, SCI
  • "RFID系統整合環境之發展", 工程科技通訊, 95, 2007/12, ELSE1
  • "RFID為基之模組化彈性製造系統單元控制器之設計與發展", 自動化會刊, 2007/12, ELSE1
  • "Designing Reusable Building Blocks of Simulation Models for FMS with Multi-Sections", IEEE International Conference on Industrial Engineering and Engineering Management, 2007/12, EI
  • "應用RFID於偏光板產業載具管理系統設計", 物流技術與戰略, 29, 65-68, 2007/10, ELSE1
  • "保護貼產業RFID物料搬運車管理系統設計", 資訊管理與工程學報, 7, 3, 1-6, 2007/07, ELSE1
  • "Validation and Evaluation for Defect-Kill-Rate and Yield Estimation Models in Semiconductor Manufacturing", International Journal of Production Research, 45, 4, 829-844, 2007/01, SCI
  • "Performance Measurement of Implementing Manufacturing Execution System", Materials Science Forum, 505-507, 1117-1122, 2006/01, SCI
  • "Optimizing a Replication Process in CD-R/DVD±R Manufacturing Using a Hybrid Procedure", Journal of Quality, 12, 4, 2005/12, ELSE1
  • "Aggregation of orders in distribution centers using data mining", Expert Systems with Applications, 28, 1, 2005/08, SCI
  • "Developing a Diagnostic System Through Integration of Fuzzy Case-based Reasoning and Fuzzy Ant Colony System", Expert Systems with Applications, 28, 1, 2005/08, SCI
  • "Batching Orders in Warehouses by Minimizing Travel Distance with Genetic Algorithms", Computers in Industry, 56, 1, 2005/08, SCI
  • "企業導入製造執行系統導入方法論與效益評估", 機械工業雜誌, 1, 261, 160-172, 2004/12, ELSE1
  • "Optimization of multipass turning operations with genetic algorithms: a Note", International Journal of Production Research, 41, 14, 2003/08, SCI
  • "電腦化維護管理系統", 機械工業雜誌, 1, 237, 146-155, 2002/12, ELSE1

Books

  • 智慧化製造系統, 活石文化出版社, 978-986-90172-1-3, 2013/12/05
  • New Techniques in Engineering Optimization (Chapter 25), Springer, 3-540-20167-x, 2004/08/01
  • New Techniques in Engineering Optimization (Chapter 28), Springer, 3-540-20167-x, 2004/08/01

Conference papers

  • "物聯網學術領域之發展軌跡與未來趨勢", 2021經營管理研討會, 台北市, 2021/06/05
  • "The Survey of Trends in Productivity 4.0 Application Demands and Technology Supports for Manufacturing Industries in Taiwan", e-CASE & e-Tech 2018, 大阪, 2018/04/01
  • "Barcode Technology Applies to Data Collection in MES – A Case Study of an Electronic Manufacturing Company", e-CASE & e-Tech 2018, 大阪, 2018/04/01
  • "An Innovated Business Model with Value-Added Service for the Logistics Industry in Taiwan – A Case Study", 2nd EAWIE Conference, 首爾, 2015/11/06
  • "Investigating User’s Acceptance Behavior on RFID Based Cars Traceability System by UTAUT Model", e-CASE &e-TECH 2014, Nagoya, 2014/04/02
  • "資料探勘技術於家居零售業之應用-以A 公司為例", 2013產業資訊應用趨勢研討會暨個案競賽, 台北, 2013/10/04
  • "Investigating Consumer’s Acceptance Behavior on RFID Based Smart House System by UTAUT Model", 2013第四屆工業工程與管理創新國際研討會, 台北, 2013/07/17
  • "Strategies for the Development of Green Logistics in Taiwan", Economic and Social Development Conference, Paris, 2013/04/05
  • "運用混合式派工法則於多區段彈性聯製線之研究", 中國機械工程學會第二十九屆全國學術研討會, 高雄, 2012/12/07
  • "運用整合性科技接受理論探討消費者對電子閱讀器接受度", 2012國防管理學術暨實務研討會, 台北市, 2012/06/15
  • "Development of a Decision Support System for Assisted Reproductive Technology", 2012 Industrial and Systems Engineering Research Conference, Orlando, 2012/05/17
  • "利用層級分析法探討工具機遠端監控系統被使用者採納之原因", 中國機械工程學會第二十八屆全國學術研討會, 台中, 2011/12/10
  • "RFID讀取器於高溫實驗與正常使用條件下之可靠度分析", 2011 International Symposium of Quality Management, 彰化, 2011/11/05
  • "我國發展綠色物流之策略", 2011第十二屆科技與管理研討會, 台北, 2011/10/27
  • "Investigating User’s Acceptance Behavior on NFC Mobile Phone Service by UTAUT Model", e-CASE & e-TECH 2011, 東京, 2011/01/18
  • "Investigating User's Acceptance Behavior on RFID Based Food Traceability System by UTAUT Model", The 2010 International Congress on Computer Applications and Computational Science (CACS2010), 新加坡, 2010/12/04
  • "The Development of EPCglobal Network-based Product e-Pedigree Information Service", 2010 Asia Pacific International Conference on RFID, 台北, 2010/12/03
  • "彈性製造系統模擬與仿真器之設計", 海峽兩岸仿真科學與技術學術研討會, 福州, 2010/11/01
  • "Product Pedigree Design Based on RFID Technology", 2009 Asia Pacific International Conference on RFID, 台北, 2009/12/15
  • "Applying Neural Networks to Detect the Failures of Turbines in Thermal Power", 2009 International Conference on Industrial Engineering and Engineering management, Hongkong, 2009/12/08
  • "應用多代理人技術於多區段彈性製造系統之設計", 中國機械工程學會第二十六屆全國學術研討會, 台南, 2009/11/20
  • "APPLYING BPN AND EWMA SPC CHART TO RFID BASED COLD CHAIN TEMPERATURE MONITORING", ASME 2009 International Manufacturing Science and Engineering Conference, West Lafayette, 2009/10/04
  • "Applying Analytic Network Process in Logistics Service Provider Selection – A Case Study of the Industry Investing in Southeast Asia", 產業電子化產學研討會, 台北, 2009/09/25
  • "APPLYING BPN TO RFID BASED PICKING OPERATIONS IN WAREHOUSE", 2009 International Conference on Concurrent Engineering (CE2009), 台北, 2009/07/20
  • "整合ART2神經網路與二進制粒子群最佳化於市場區隔之研究-以手機市場為例", 中國工業工程學會97年度年會暨學術研討會, 桃園, 2008/12/13
  • "A Web Services Based CTM Platform for Supply Chain Collaboration", 2008 International Symposium on Intelligent Informatics (ISII2008), Kumamoto, 2008/12/12
  • "晶圓廠自動化物料搬運系統交通管制之研究", 中國機械工程學會第二十五屆全國學術研討會, 彰化, 2008/11/21
  • "運用資料探勘技術於設備失效分析", 2008服務創新與應用研討會, 台北, 2008/11/07
  • "產業東南亞跨國國際物流之研究", 2008科技與管理國際學術研討會, 彰化, 2008/10/02
  • "Applying RFID to Picking Operations in Warehouse", The 13th Annual International Conference on Industrial Engineering Theory, Applications and Practice, Las Vegas, 2008/09/09
  • "Applying RFID Hand-held Device in Factory Equipment Diagnosis", The 13th Annual International Conference on Industrial Engineering Theory, Applications and Practice, Las Vegas, 2008/09/09
  • "應用倒傳遞網路演算法於工廠安全管理", 2008RFID科技論文研討會, 台北, 2008/02/01
  • "以模糊分析層級程序法探討製造業導入RFID之關鍵因素", 2008RFID科技論文研討會, 台北, 2008/02/01
  • "RFID應用於工廠安全特徵警示之研究", 2007科技與管理研討會, 台北, 2007/12/22
  • "Cell Controller Software Design for Multi-sections Flexible Production System", 8th APIEM Conference, Kaohsiung, 2007/12/09
  • "多區段彈性製造系統模擬器之設計", 中國機械工程學會第二十四屆全國學術研討會, 中壢, 2007/11/23
  • "應用粒子群最佳化演算法設計設備管理資料倉儲與效能分析", 中國工業工程學會九十五年度年會暨學術研討會, 台中, 2006/12/23
  • "非平衡資料探勘方法之研究", 2006科技與管理研討會, 彰化, 2006/11/10
  • "Development of a Testbed for RFID Based Flexible Manufacturing System", The 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice, 名古屋, 2006/10/24
  • "A Web Service Based Collaborative Management Framework for Semiconductor Equipment", 2006 IEEE International Conference on Systems, Man and Cybernetics, 台北, 2006/10/08
  • "Impact of Operation Flexibility and Dispatching Rules on the Performance of Flexible Transfer Line", The 4th International Conference on Computer Science and its Applications, 聖地牙哥, 2006/06/27
  • "Cubes Design in Maintenance Data Warehouse with Genetic Algorithms", The 36th International Conference on Computers and Industrial Engineering, 台北, 2006/06/20
  • "Modular PAC Software Design Based on Color Petri Net", IIE Annual Conference and Exposition, 奧蘭多, 2006/05/20
  • "應用基因演算法設計設備管理資料倉儲與效能分析", 中國工業工程學會九十四年度年會暨學術研討會, 新竹, 2005/12/07
  • "Data Warehouse Design for Manufacturing Execution Systems", IEEE International Conference on Mechatronics, Taipei, 2005/06/10
  • "Modular Design Method for the Control Software Development of the Cell Controller in Automated Manufacturing Systems", IEEE International Conference on Networking, Sensing and Control, Tucson, 2005/03/19
  • "Deploying a Data Warehouse for manufacturing Execution Systems", The 9th Annual International Conference on Industrial Engineering, Auckland, 2004/11/27
  • "成衣業產銷協同管理與物料分派模式之研究", 第四屆精密機械製造研討會, 台北, 2004/11/13
  • "建構現場營運管制資訊系統資料倉儲之研究", 第一屆台灣作業研究學會學術研討會, 台北, 2004/11/12
  • "維修備用零件之預防性替換與比例政策存貨管理", 第一屆台灣作業研究學會學術研討會暨2004年科技與管理學術研討會, 台北, 2004/11/12
  • "企業導入製造執行系統方法論與績效評估", 2004 年自動化科技研討會, 台北, 2004/06/18
  • "Deploying a Data Warehouse for Equipment-Related Management Information Systems", The 8th Annual International Conference on Industrial Engineering, Las Vegas, 2003/11/10
  • "A Flexible Data Model for Shop Floor Information System in a Lot-based Production System", The 7th International Conference on Automation Technology, Chiayi, 2003/07/16
  • "An Integrated Schema for Computerized Maintenance Management System and Manufacturing Execution System", The 6th International Conference on Engineering Design and Automation, Hawaii, 2002/08/04
Go Top