Professor／Department of Materials and Mineral Resources Engineering
REACH OUT：
Journal articles
"Pinecone-derived biomass carbons as anodes for lithium and sodium-ion batteries by template-assisted and chemically activated approaches", Journal of Power Sources, 580, 233329, 2023/10, SCI
"Bimetallic AgCu nanoparticles decorated on zeolitic imidazolate framework derived carbon: An extraordinarily active and recyclable nanocomposite catalyst for reduction of nitroarenes and degradation of organic dyes", Journal of Environmental Chemical Engineering, 11, 3, 109777, 2023/06, SCI
"One Pot Synthesis of Cubic Mesoporous Silica KIT-6 Functionalized with Sulfonic Acid for Catalytic Dehydration of Fructose to 5-Hydroxymethylfurfural", ChemistrySelect, 7, 45, e202202357, 2022/12, SCI
"New insights into the outstanding performances of nickel-doped manganese oxide nanoparticles embedded in a 3D carbon nanopipes framework as anode for lithium and sodium-ion batteries", New insights into the outstanding performances of nickel-doped manganese oxide nanoparticles embedded in a 3D carbon nanopipes framework as anode for lithium and sodium-ion batteries, 46, 15, 22454, 2022/10, SCI
"Development of a New Crosslinked Highly Conductive Hybrid Electrolyte based on Polyetherdiamine, Diphenylmethane Diisocyanate and Organosilanes for Efficient Lithium-Metal Battery", Batteries and Supercaps, 5, 12, e202200290, 2022/09, SCI
"Effect of nanowire conductive transfer on the performance of batchmicrobial fuel cells", International Journal of Energy Research, 46, 5, 6919, 2022/04, SCI
"Effect of nanowire conductive transfer on the performance of batch-microbial fuel cells", International Journal of Energy Research, 2021/12, SCI
"N-functionalized mesoporous carbon supported Pd nanoparticles as highly active nanocatalyst for Suzuki-Miyaura reaction, reduction of 4-nitrophenol and hydrodechlorination of chlorobenzene", Journal of Industrial and Engineering Chemistry, 104, 529, 2021/09, SCI
"Bimetallic Co/Zn zeolitic imidazolate framework ZIF-67 supported Cu nanoparticles: An excellent catalyst for reduction of synthetic dyes and nitroarenes", Journal of Hazardous Materials, 407, 124392, 2021/04, SCI
"Ordered mesoporous carbon with tubular framework supported SnO2 nanoparticles intertwined in MoS2 nanosheets as an anode for advanced lithium-ion batteries with outstanding performances", Electrochimica Acta, 380, 138195, 2021/03, SCI
"Space confined synthesis of highly dispersed bimetallic CoCu nanoparticles as effective catalysts for ammonia borane dehydrogenation and 4-nitrophenol reduction", Applied Surface Science, 538, 148091, 2021/01, SCI
"Dominated flow parameters applied in a recirculation microbial fuel cell", Process Biochemistry, 99, 236-245, 2020/09, SCI
"Development of electro spun microtube array membrane for anode application in the microbial fuel cell", Surface & Coatings Technology, 399, 126171, 2020/07, SCI
"Tribological and mechanical properties of Cu/Ni-microdiamond bilayers on brass substrates coated by composite electrodeposition technology", Surf. Topogr.: Metrol. Prop., 8, 024005, 2020/04, SCI
"Insight into the Superior Lithium Storage Properties of Ultrafine CoO Nanoparticles Confined in a 3D Bimodal Ordered Mesoporous Carbon CMK-9 Anode", ChemSusChem, 13, 2952-2965, 2020/04, SCI
"A comparative study on the tribological behavior of various thermally sprayed Inconel 625 coatings in a saline solution and deionized water", Surface & Coatings Technology, 385, 125442, 2020/02, SCI
"Ru Nanoparticles Embedded in Cubic Mesoporous Silica SBA-1 as Highly Ecient Catalysts for Hydrogen Generation from Ammonia Borane", catalysts, 10, 267, 2020/02, SCI
"Flame-sprayed strontium- and magnesium-doped hydroxyapatite on titanium implants for osseointegration enhancement", Surface & Coatings Technology, 386, 125452, 2020/02, SCI
"Ultrafine bimetallic Ag-doped Ni nanoparticles embedded in cage-type mesoporous silica SBA-16 as superior catalysts for conversion of toxic nitroaromatic compounds", Journal of Hazardous Materials, 384, 121270, 2020/01, SCI
"Palladium nanoparticles encapsulated in carboxylic acid functionalized periodic mesoporous organosilicas as efficient and reusable heterogeneous catalysts for hydrogen generation from ammonia borane", Materials Research Bulletin, 125, 110786, 2020/01, SCI
"Confinement of Cu Nanoparticles in the Nanocages of Large Pore SBA-16 Functionalized with Carboxylic acid: Enhanced Activity and Excellent Durability for 4-Nitrophenol Reduction", Dalton Transactions, 48, 23, 8227-8237, 2019/11, SCI
"Encapsulation of LiFePO4 Nanoparticles into 3D Interpenetrating Ordered Mesoporous Carbon as a High-performance Cathode for Lithium-ion Batteries Exceeding Theoretical Capacity", ACS Appl. Energy Mater, 2, 1121-1133, 2019/10, SCI
"3D Interpenetrating Cubic Mesoporous Carbon Supported Nanosized SnO2 as An Efficient Anode for High Performance Lithium-ion Batteries", Journal of Alloys and Compounds, 791, 892-904, 2019/03, SCI
"Synthesis of highly dispersed ultra-small cobalt nanoparticles within the cage-type mesopores of 3D cubic mesoporous silica via double agent reduction method for catalytic hydrogen generation", Applied Surface Science, 470, 764-772, 2019/03, SCI
"Rare-earth metal oxide hybridized PtFe nanocrystals synthesized via microfluidic process for enhanced electrochemical catalytic performance", Electrochimica Acta, 299, 80-88, 2019/03, SCI
"Design, synthesis and characterization of polysiloxane and polyetherdiamine based comb-shaped hybrid solid polymer electrolytes for electrochemical devices", Materials Research Bulletin, 109, 72-81, 2019/01, SCI
"pH responsive selective protein adsorption by carboxylic acid functionalized large pore mesoporous silica nanoparticles SBA-1", Materials Science & Engineering C - Materials for Biological Applications, 94, 344-356, 2019/01, SCI
"Constructed mathematical model for nanowire electron transfer in microbial fuel cells", Journal of Power Sources, 402, 483, 2018/10, SCI
"Thermal Conductivity Optimization and Entropy Generation Analysis of Titanium Dioxide Nanofluid in Evacuated Tube Solar Collector", Applied Thermal Engineering, 145, 155, 2018/09, SCI
"The influence of isothermal aging, surfactant and inorganic precursors concentrations on pore size and structural order of mesoporous bioactive glass", Solid State Sciences, 84, 104, 2018/08, SCI
"Synthesis and characterization of porous hydroxyapatite coatings deposited on titanium by flame spraying", Surface and Coatings Technology, 349, 15, 357, 2018/06, SCI
"Effect of Wall Boundary Layer Thickness on Power Performance of a Recirculation Microbial Fuel Cell", Energies, 11, 4, 1003, 2018/04, SCI
"Hybrid high power impulse and radio frequency magnetron sputtering system for TiCrSiN thin film depositions: Plasma characteristics and film properties", Surface and Coatings Technology, 350, 762, 2018/04, SCI
"Influences of feedstock and plasma spraying parameters on the fabrication of tubular solid oxide fuel cell anodes", Ceramics International, 44, 7, 7824-7830, 2018/02, SCI
"Carboxylic acid Functionalized Cage‐Type Mesoporous Silica FDU‐12 as Support for Controlled Synthesis of Platinum Nanoparticles and Their Catalytic Applications", Chemistry-A European Journal, 24, 13540, 2018/02, SCI
"Plasma-Sprayed LSM Protective Coating on Metallic Interconnect of SOFC", coatings, 7, 226, 2017/12, SCI
"Characterization of Hydroxyapatite (HA) Sputtering Targets by APS Methods", coatings, 7, 11, 197, 2017/11, SCI
"Flame sprayed zinc doped hydroxyapatite coating with antibacterial and biocompatible properties", Ceramics International, 43, 829-835, 2017/09, SCI
"Influence of feedstocks on processes and microstructure of flame-sprayed SOFC anode", Ceramics International, 43, 723-728, 2017/09, SCI
"Development of macroporous tricalcium phosphate with hyaluronic acid as the cell carrier as the subcutaneous filler", Ceramics International, 43, 823-828, 2017/09, SCI
"2D Numerical Physical Model Setting for Three Kinds of Electron Transferring Pathway in Microbial Fuel Cells", Sensors and Materials, 29, 7, 1055-1060, 2017/09, SCI
"Exposing effect of comb-type cathode electrode on the performance of sediment microbial fuel cells", Applied Energy, 204, 620-625, 2017/08, SCI
"Developments of metallic anodes with various compositions and surfaces for the microbial fuel cells", International Journal of Hydrogen Energy, 2017/08, SCI
"Bifunctional Cage-Type Cubic Mesoporous Silica SBA-1 Nanoparticles for Selective Adsorption of Dyes", Chemistry - An Asian Journal, 12, 12, 1314-1325, 2017/02, SCI
"Cage like ordered carboxylic acid functionalized mesoporous silica with enlarged pores for enzyme adsorption", Journal of Materials Science, 52, 11, 6322-6340, 2017/02, SCI
"Biocompatibility and mechanical property evaluation of Zr-Ti-Fe based ternary thin film metallic glasses", Surface and Coatings Technology, 320, 512-519, 2017/01, SCI
"Biocompatibility and mechanical property evaluation of Zr-Ti-Fe based ternary thin film metallic glasses", Surface and Coatings Technology, 2016/12, SCI
"Effects of chaotic acclimation applied on performance of microbial fuel cells", International Journal of Green Energy, 13-14, 1501, 1506, 2016/04, SCI
"Multi-effects of gravity and geometric flow channel on the performance of continuous microbial fuel cells", International Journal of Green Energy, 13-14, 1483, 1489, 2016/03, SCI
"Effects of silicon contents on the characteristics of Zr–Ti–Si–W thin film metallic glasses", Thin Solid Films, 618, 28, 35, 2016/02, SCI
"Effects of duty cycle and electrolyte concentration on the microstructure and biocompatibility of plasma electrolytic oxidation treatment on zirconium metal", Thin Solid Films, (2015), 596, 87-93, 596, 87, 93, 2016/01, SCI
"Influences of the surfactant on the performance of nano-LiMn2O4 cathode material for lithium-ionbattery", Ceramics International 41 (2015) S779–S786, 41, S779-S786, 2016/01, SCI
"The influence of deposition parameters on the structure and properties of aluminum nitride coatings deposited by high power impulse magnetron sputtering", Thin solid films, 572, 161-168, 2015/01, SCI
"Microstructure, mechanical and anti-corrosion property evaluation ofiron-based thin film metallic glasses", Surface & Coatings Technology, 260, 46-55, 2015/01, SCI
"Carbon Nanotube Planted on Ni-based Alloy in Microbial Fuel Cell", Journal of Nanomaterials, 2015/01, SCI
"Types of Simplified Flow Channels without Flow Obstacles in Microbial Fuel Cells", International Journal of Hydrogen Energy, 39, 14306-14311, 2015/01, SCI
"Influence of high power impulse magnetron sputtering pulse parameters on the properties of aluminum nitride coatings", Surface and Coatings Technology, 259, 219-231, 2014/01, SCI
"Evaluations of the residual strains in the plasma sprayed multi-layer electrodes of the solid oxide fuel cell", Surface & Coatings Technology, 237, 341-348, 2014/01, SCI
"The microstructure and mechanical properties of nitrogen and boron contained ZrCuAlNi thin film metallic glass composites", Surface and Coatings Technology, 237, 276-283, 2014/01, SCI
"Effects of duty cycle and pulse frequency on the fabrication of AlCrN thin films deposited by high power impulse magnetron sputtering", Thin Solid Films, 549, 281-291, 2014/01, SCI
"Evaluations of the residual strains in the plasma sprayed multi-layer electrodes of the solid oxide fuel cell", Surface and Coatings Technology, 237, 341-348, 2013/12, SCI
"The microstructure and mechanical properties of nitrogen and boron contained ZrCuAlNi thin film metallic glass composites", Surface and Coatings Technology, 237, 276-283, 2013/12, SCI
"Synthesis of the mesoporous TiO2 array for hydroxyapatite precipitation", Surface & Coatings Technology, 231, 578-582, 2013/08, SCI
"Residual stresses in the atmospheric plasma sprayed NiO/LDC anode of the metallic supported solid oxide fuel cells", Surface & Coatings Technology, 231, 193-200, 2013/08, SCI
"Titanium surface modified by hydroxyapatite coating for dental implants", Surface & Coatings Technology, 231, 337-345, 2013/08, SCI
"Antibacterial property of CuCrO2 thin films prepared by RF magnetron sputtering deposition", Vacuum, 87, 174-177, 2013/03, SCI
"Application of aluminum-alloy mesh composite carbon cloth for the design of anode/cathode electrodes in Escherichia coli microbial fuel cell", International journal of hydrogen energy, 38, 11131-11137, 2013/02, SCI
"Porous Ni/8YSZ Anode of SOFC Fabricated by the Plasma Sprayed Method", International Journal of Hydrogen Energy, 2012/05, SCI
"Titanium Surface Modified by Hydroxyapatite Coating for Dental Implants", Surface & Coatings Technology, 2012/05, SCI
"Residual stresses in the atmospheric plasma sprayed NiO/LDC anode of the metallic supported solid oxide fuel cells", Surface & Coatings Technology, 2012/04, SCI
"Antibacterial property of CuCrO2 thin films prepared by RF magnetron sputtering deposition", Vacuum, 2012/03, SCI
"Investigation of residual stress generation in plasma-sprayed hydroxyapatite coatings with various spraying programs", Surface & Coatings Technology, 205, 21-22, 5165-5171, 2011/08, SCI
"Influences of the processes on the microstructures and properties of the plasma sprayed IT-SOFC anode", Journal of the European Ceramic Society, 31, 1, 3109-3118, 2011/05, SCI
"La2O3–Al2O3–B2O3–SiO2 glasses for solid oxide fuel cell applications", International Journal of Hydrogen Energy, 36, 5, 3666-3672, 2011/03, SCI
"Some Aspects on the Discoloration and Antimicrobial Propertyof a Thermally Passivated Copper Surface in a Highly Humid Environment", Materials Transactions, 52, 2, 265-267, 2011/02, SCI
"Aqueous Gold nanosols Stabilized by Electrostatic Protection Generated by X-ray Irradiation Assisted Radical Reduction", Materials Chemistry and Physics, 106, 2-3, 323, 2008/07, SCI
"The influence of residual stress on the shear strength between the bone and plasma-sprayed hydroxyapatite coating", Journal of Materials Science: Materials in Medicine, 19, 3, 1051-1060, 2008/04, SCI
"Bonding strength investigation of plasma-sprayed HA coatings on alumina substrate with porcelain intermediate layer", Materials Chemistry and Physics, 104, 2-3, 312-319, 2007/08, SCI
"Influence of residual stress on bonding strength of the plasma-sprayed hydroxyapatite coating after the vacuum heat treatment", Surf. Coat. Tech, 201, 7187-7193, 2007/05, SCI
"X-ray synthesis of nickel–gold composite nanoparticles", Materials Chemistry and Physics, 100, 2-3, 292, 2006/09, SCI
"Anti-bacteria algae properties of nanoparticle coated porous ceramics", The Chinese Journal of Process Engineering, 6, 2, 240-244, 2006/08, EI
"Synchrotron X-ray Synthesis of Colloidal Gold Particles for Drug Delivery", Materials Chemistry and Physics, 100, 72, 2006/07, SCI
"Imaging Cells and Tissues with Refractive Index Radiology", Biophysical Journal, 87, 4180-4187, 2004/12, SCI
"Measurements of residual stresses in plasma-sprayed hydroxyapatite coatings on titanium alloy", Surface and Coating Technology, 190/191, 122-131, 2004/06, SCI
"Measurements of residual stresses in plasma-sprayed hydroxyapatite coatings on titanium alloy", Surface and Coating Technology, 190/191, 122-131, 2004/03, SCI
"Residual stress in plasma-sprayed hydroxyapatite coating measured by the material removal method", Journal of Materials Science Letter, 22, 13, 919-922, 2003/06, SCI
"Mechanical properties and Young’s modulus of plasma-sprayed hydroxyapatite coating on Ti-substrate in simulated body fluid", Journal of Biomedical Material Research, 67A, 886-899, 2003/06, SCI
"The bonding of plasma-sprayed hydroxyapatite coatings to titanium: effect of processing, porosity and residual stress", Thin solid films, 444, 260-275, 2003/06, SCI
Chapters
Rumen Microbial Fuel Cells, 1, New Delhi, India, 978-1-84593-956-4, 2012/12/01
"Investigations of various powder feeder of the flame spray process for the 8YSZ electrolyte deposition in the solid oxide fuel cells", APMA 2019, Pune, 2019/02/17
"Influence of Thermal Residual Strains on Bonding Strength of Plasma Sprayed NiO/LDC Anode Coating on Porous Ni Substrate", TACT2017 International Thin Films Conference, 花蓮, 2017/10/15
"Effect of Silicon Content on the Microstructure and Mechanical Properties of TiCrSiN Thin Films", 2017 TACT, 花蓮, 2017/10/15
"mechanical property and corrosion resistance evaluation of ZrCuAlNiB thin film metallic glasses", 2017 TACT, 花蓮, 2017/10/15
"Development of YSZ Electrolyte of SOFC by Flame Spraying", TACT2017 International Thin Films Conference, 花蓮, 2017/10/15
"Preparing Degradable Calcium Sulfate Coating on Ti6Al4V Substrate by flame spray", TACT2017 International Thin Films Conference, 花蓮, 2017/10/15
"Developments of acoustic absorption coating by thermal spraying technique", TACT2017 International Thin Films Conference, 花蓮, 2017/10/15
"Anti bacterial property evaluation of boron contained ZrCuAlNi thin film metallic glasses", The 11th Anniversary Asian-European International Conference on Plasma Surface Engineering, 濟州島, 2017/09/11
"Effects of Processing Parameters on the Fabrication of TiCrSiN Thin Films Deposited by a Hybrid HiPIMS and RF Sputtering System", 2017 ICMCTF, 聖地牙哥, 2017/04/24
"Studies of the compositions and characteristics of the sintered Ti-Ni-Mo alloy", The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
"The Study of 8YSZ Electrolyte Fabrication on Plasma Sprayed Tubular Porous Anode by the Dip-coating Method", The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, 2016/12/04
"Influences of Feedstocks on the Processes and Microstructures of the Flame-sprayed SOFC Anode", The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, 2016/12/04
"Influences of plasma spraying parameters on fabrication of tubular SOFC anode", The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, 2016/12/04
"Synthesis and Characteristics of Iron and Zinc Doped Tricalcium Phosphate", The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, 2016/12/04
"ynthesis of Zn doped Hydroxyapatite with Antibacterial and Biocompatibility Properties", The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, 2016/12/04
"Developments of Macroporous Tricalcium Phosphate with Hyaluronic Acid as the Cell Scaffold for the Subcutaneous Filler", The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, 2016/12/04
"Effect of Reynolds Number on the Performance of a Continuous Microbial Fuel Cells", 3rd Asian Pacific Conference of International Society for Microbial Electrochemistry and Technologies, Taipei, 2016/08/31
"Properties on Hypoeutectoid TixFe6Mo Alloys by Vacuum Sintering Processes", 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), 匹茲堡, 2016/07/17
"熱熔射噴塗製備CuCrO2薄膜之製程開發", 台灣陶瓷學會年會, 屏東, 2016/05/20
"Development of 8YSZ electrolyte of SOFC by the suspension flame spray", 13th International Conference on Ceramic Processing Science, 奈良, 2016/05/08
"Development of Nickel-Copper Alloy Electrode in Microbial Fuel Cell by Thermal Spray", 43th International Conference on Metallurgical Coatings and Thin Films, 聖地牙哥, 2016/04/25
"Processing developments of sound absorption coating with corrosion resistibility underwater", 43th International Conference on Metallurgical Coatings and Thin Films, 聖地牙哥, 2016/04/25
"Comparison Study on the Mechanical Property and Biocompatibility of W-contained Ti-based and Zr-based Thin Film Metallic Glasses", 3th International Conference on Metallurgical Coatings and Thin Films, 聖地牙哥, 2016/04/25
"Influences of surface treatments on the adhesion of zirconia dental bridge", TACT2015 International Thin Films Conference, Tainan, 2015/11/15
"Influences of plasma spraying parameters on fabrication of tubular anode of SOFC", TACT2015 International Thin Films Conference, Tainan, 2015/11/15
"Developments of acoustic absorption coating by thermal spraying technique", TACT2015 International Thin Films Conference, Tainan, 2015/11/15
"Mechanical property investigations of plasma sprayed NiO/LDC anode on the porous Nickle of the metal supported SOFC", 2015 ACTSEA, Tainan, 2015/11/08
"Effect of Boundary Layer Thickness on the Performance of Microbial Fuel Cell", 7th European Meeting on Chemical Industry and Environment, Tarragona, 2015/06/10
"Effects of duty cycle and electrolyte concentration on the microstructure and biocompatibility of plasma electrolytic oxidation treatment on zirconium metal", 42th International Conference on Metallurgical Coatings and Thin Films, 聖地牙哥, 2015/04/20
"Influences of plasma spraying parameters on fabrication of tubular anode coating", TACT2013 International Thin Films Conference, Taipei, 2013/10/05
"Plasma-sprayed LSM protective coating on metallic interconnect of SOFC", TACT2013 International Thin Films Conference, Taipei, 2013/10/05
"Developments of the Metal Anode for the Microbial Fuel Cells", The fifth World Hydrogen Technologies Convention, Shanghai, 2013/09/25
"8YSZ Electrolyte Fabricated on the Plasma-sprayed Tubular Anode by the Dip-coating Method", The fifth World Hydrogen Technologies Convention, Shanghai, 2013/09/25
"Developments of Clad Metallic Interconnect for Fuel Cells", The fifth World Hydrogen Technologies Convention, Shanghai, 2013/09/25
"Synthesis and microstructure investigation of mesoporous TiO2 film", The 20th International Symposium on Metastable, Amorphous and Nanostructured Materials, Torino, 2013/06/30
"Evaluations of the residual stress in the plasma sprayed multi-layer electrodes of the solid oxide fuel cell", 40th International Conference on Metallurgical Coatings and Thin Films, 聖地牙哥, 2013/04/29
"Influences of various feedstocks on characteristics of the plasma sprayed NiO/YSZ anode in solid oxide fuel cell", 40th International Conference on Metallurgical Coatings and Thin Films, 聖地牙哥, 2013/04/28
"Oxidation Behavior and Electrical Properties of Clad Metallic Interconnect for SOFC at High-Temperature", 63rd Annual Meeting of the International Society of Electrochemistry, Prague, 2012/08/19
"Reinforcement of the bonding strength between the ceramic dental bridge and resin cement by introducing the functional porous bond coat", 9th World Biomaterials Congress, Chengdu, 2012/06/01
"鍍製CrN and CrAlSiN薄膜之H132工具鋼於A380鋁合金熔湯的抗侵蝕能力研究", [2011. Nov. 25 舉辦] 2011年中國礦冶工程學會年會, 台北, 2012/01/27
"Performance of CrN and CrAlSiN coated H13 tool steels in molten A380 aluminum alloy", [2011. Nov. 20~23舉辦] TACT 2011 International Thin Films Conference, 墾丁, 2012/01/25
"Residual stress states in the plasma sprayed electrodes of the metallic supported solid oxide fuel cells", [2011. Nov. 20-23舉辦] TACT 2011 International Thin Films Conference, 墾丁, 2012/01/25
"Titanium Surface Modified by Hydroxyapatite Coating for Dental Implants", [2011. Nov. 20-23舉辦] TACT 2011 International Thin Films Conference, 墾丁, 2012/01/25
"Synthesis of the mesoporous TiO2 film for hydroxyapatite precipitation", [2011. Nov. 20-23舉辦] TACT 2011 International Thin Films Conference, 墾丁, 2012/01/25
"Influences of the Anode Materials and Surface Properties on the Microbial Fuel Cells", [2011. Nov. 2-5 舉辦] 11th International Conference on Clean Energy (ICCE-2011), 台中, 2012/01/15
"Porous Ni/YSZ Anode of SOFC Fabricated by the Plasma Sprayed Method", [2011. Nov. 2-5 舉辦] 11th International Conference on Clean Energy (ICCE-2011), 台中, 2012/01/15
"溶膠凝膠法製備具中孔洞結構白榴石牙科瓷之研究", [2011. Aug. 18 舉辦] 2011生物醫學工程科技研討會, 台南, 2012/01/06
"奈米銅合金之抗菌性能研究", [2011. Aug. 18 舉辦] 2011生物醫學工程科技研討會, 台南, 2012/01/06
"The study of antibacterial property of zinc oxide nanoparticle on porcelain surface", [2011. Aug. 18-21 舉辦] 5th WACBE World Congress on Bioengineering, 台南, 2012/01/05
"Influences of surface treatments on the bonding strength between the zirconia dental bridge and composite resin cement", [2011. Aug. 18-21 舉辦] 5th WACBE World Congress on Bioengineering, 台南, 2012/01/05
"Synthesis of the titania mesoporous array on the Ti substrate", 2011 EMRS fall meeting, 華沙, 2011/09/19
"Structures and properties investigation of vacuum plasma sprayed B4C coating after the simulated irradiation test", 2011 AVS international plasma workshop, 台北, 2011/03/22
"Influence of Residual Stress on Structure and Mechanical Properties of Plasma Sprayed Ni/LDC Anode Coating on Ni Substrate of SOFC", 2011 AVS International Plasma Workshop, 台北, 2011/03/22
"Influences of the feedstocks on the microstructures and properties of the plasma sprayed IT-SOFC anode", International Conference of Bi2O3-based Materials for Energy Application, Taipei, 2010/11/21
"Influence of feedstock on microstructures of plasma sprayed Ni/YSZ anode in SOFC", The 7th Asian Meeting on Ferroelectricity and Asian Meeting on Electroceramics, Jeju, 2010/06/28
"Influence of Thermal Residual Strains on Bonding Strength and Fracture of Plasma Sprayed Ni/LDC Anode Coating on Ni Substrate", 2010 International Thermal Spray Conference & Exposition, 新加坡, 2010/05/03
"Influence of Thermal Residual Strains on Bonding Strength and Fracture of Plasma Sprayed Ni/LDC Anode Coating on Ni Substrate", [2009 Dec. 14-16] TACT 2009 International Thin Films Conference, Taipei, 2010/01/20
"Microstructure analysis of the YSZ/Ni anode deposited by plasma spraying in SOFC", 8th Pacific RIM conference on ceramic and glass technology, 溫哥華, 2009/05/31
"“Evaluations of thermal residual strains in the atmospheric plasma sprayed LDC/Ni-LSGM-LSCF solid oxide fuel cells", 8th Pacific RIM conference on ceramic and glass technology, 溫哥華, 2009/05/31
"Fabrication of plasma sprayed porous Ni/YSZ anode by introducing the pore former in the feedstock powder", 8th Pacific RIM conference on ceramic and glass technology, 溫哥華, 2009/05/31
"Mechanical and Histological Evaluation of Plasma Sprayed Hydroxyapatite Coating on Titanium Bond Coat", 10th International Conference and Exhibition of the European Ceramic Society, 德國, 2007/05/17
"Mechanical properties of plasma-sprayed hydroxyapatite coating after the post heat treatment: the effect of residual stress", International Thermal Spray Conference & Exposition, 中國, 2007/05/13
"The Shear Strength of Plasma-Sprayed Hydroxyapatite Coating to Bone: The Effect of Residual Stress", International Thermal Spray Conference & Exposition, 西雅圖, 2006/05/15
"Bonding strength investigation of plasma-sprayed HA coatings on alumina substrate with porcelain intermediate layer", International Thermal Spray Conference & Exposition, Seattle, 2006/05/15
"X-ray-induced gold nanoparticle precipitation from aqueous solution", 2006 Cross-Strait Symposium on Nanomaterials and Technology, 台北, 2006/04/24
"Photo-synthesis of Nano Gold Particles for Drug Delivery", 2006 TMS Annual Meeting & Exhibition, San antonio, 2006/03/12
"The influence of residual stress on the bonding strength between the bone and plasma-sprayed hydroxyapatite coating", The 12th International Conference On Biomedical Engineering, 新加坡, 2005/12/07
"The study of plasma-sprayed porcelain/hydroxyapatite composite coatings on alumina substrate", 17th International Symposium on Plasma Chemistry, 多倫多, 2005/08/07
"Investigations of Plasma-sparyed hydroxyapatite coating on titanium alloy reinforced by ZrO2", 17th International Symposium on Plasma Chemistry, 多倫多, 2005/08/07
"Measurements of Residual Stresses in Plasma-Sprayed Hydroxyapatite Coatings on Titanium Alloy", 2005 TMS Annual Meeting & Exhibition, 舊金山, 2005/02/13
"Mechanical property changes of plasma sprayed hydroxyapatite coating on Ti6Al4V substrate in simulated body fluid", Symposium on Advanced Materials for Biomedical Applications of 41th Conference of Metallurgists, 蒙特婁, 2002/08/11
"Bonding strength of plasma sprayed HA coating on Ti-6Al-4V alloy substrate: the effect of residual stress", 4th World Congress of Biomechanics, 卡加立, 2002/08/04
