Professor／Graduate Institute of Manufacturing Technology
REACH OUT：
Journal articles
"Applicability of Non-destructive laser ultrasound and nonlinear ultrasonic technique to evaluation of thermally aged CF8 duplex stainless steel", International Journal of Pressure Vessels and Piping, 193, 1, 104451 - 104461, 2021/06, SCI
"Surface alloying of FeCoCrNiMn particles on Inconel-718 using plasma transferred arc technique: Microstructure and wear characteristics", RSC Advances, 11, 1, 28271-28285, 2021/06, SCI
"Investigation on Microstructure, Nanohardness and Corrosion Response of Laser Cladded Colmonoy-6 Particles on 316L Steel Substrate", Materials, 14, 2, 6183 - 6202, 2021/06, SCI
"Correlation of microstructural evolution with mechanical and tribological behaviour of SS 304 specimens developed through SLM technique", Metals and Materials International, 1, 1, 1-12, 2021/06, SCI
"Nondestructive characterization of mechanical properties on metallic and polymer plates using hybrid laser-air coupled ultrasonic techniques", The International Journal of Advanced Manufacturing Technology,, 112, 1, 1767–1785, 2021/06, SCI
"Material characterization and defect detection of additively manufactured ceramic teeth using non-destructive techniques", Ceramics International, 47, 5, 5839-7292, 2021/03, SCI
"Microstructure and tribological behaviour of FeCoCrNiAlCuMn particles alloyed on Inconel-718 substrate using plasma transferred arc technique", Intermetallics, 139, 1, 107360 - 107369,, 2021/01, SCI
"Numerical simulation and nondestructive characterization of material properties and defect analysis of Cortical bone using Laser ultrasound techniques", ACS Biomaterials Science and Engineering, 7, 8, 3917-3932, 2021/01, SCI
"Modelling and non-destructive measurement of dispersion behaviour of stainless steel and alumina ceramic porous plates", Ceramics International, 47, 1, 14233–14243, 2021/01, SCI
"Microstructural, mechanical and wear behaviour of Inconel-718 produced through laser-powder bed fused additive manufacturing", Materials Science and Technology, 37, 3, 326-337, 2021/01, SCI
"Characterization of ceramic phononic crystals prepared with additive manufacturing: Ultrasonic technique and finite element analysis", Ceramics International, 46, 17, 27550-27560, 2020/12, SCI
"Optimization of Drilling Process on Carbon-Fiber Reinforced Plastics Using Genetic-Algorithm", Surface Review and Letters, 28, 3, 2020/11, SCI
"Hybrid laser and air-coupled ultrasonic defect detection of aluminium and CFRP plates by means of Lamb mode", Results in Physics, 19, 2020/10, SCI
"Microstructural Evolution and Wear Behavior of AlCoCrCuFeNi High Entropy Alloy on Ti–6Al–4V Through Laser Surface Alloying", Metals and Materials International, 2020/09, SCI
"Machinability study on CFRP composite using Taguchi based grey relational analysis", Materials Today: Proceedings, 21, 1425–1431, 2020/09, SCI
"Evaluation of defect detection in aluminium, CFRP and epoxy resin plates using non-contact Air-coupled ultrasonic waves", International Journal of Precision Engineering and Manufacturing, 21, 1843–1856, 2020/08, SCI
"Inhomogeneous mechanical properties in Additively manufactured parts characterized by Nondestructive laser ultrasound technique", NDT&E International, 116, 2020/08, SCI
"Minimum cutting thickness and surface roughness achieving during micromachining of aluminium 19000 using CNC machine", Materials Today: Proceedings, 21, 755–761, 2020/08, SCI
"Fabrication of Coaxial and Confocal Transducer Based on Sol-Gel Composite Material for Optical Resolution Photoacoustic Microscopy", Diagnostics, 10, 1, 6, 2020/06, SCI
"Investigation on Drilling Behavior of CFRP Composites Using Optimization Technique", Arabian Journal for Science and Engineering, 2020/06, SCI
"Non-Destructive characterization of Elastic Modulus of APS Coated Ni-5Al/10hBN on Stainless Steel 304 Under Elevated Temperature", Archives of Civil and Mechanical Engineering, 20:72, 1-15, 2020/06, SCI
"Comparative study of NiCrFeMoNb/FeCrMoVC laser cladding process on Nickel based super-alloy", Materials and Manufacturing Processes, 35, 12, 1383–1391, 2020/06, SCI
"Droplet spreading and wettability of Laser textured C-263 based Nickel superalloy", Surface and Coatings Technology, 397, 1260552, 2020/06, SCI
"Non-destructive Evaluations of 3D Printed Ceramic Teeth: Young’s modulus and Defect detections", Ceramics International, 46, 14(1), 22987-22998, 2020/06, SCI
"Influence of Microstructural Changes’ Effects on the Linear and Nonlinear Ultrasonic Parameters of Cast Stainless Steels", Applied Science, 10, 10, 3476, 2020/05, SCI
"Microstructure and wear resistance of laser cladded Inconel 625 and Colmonoy 6 depositions on Inconel 625 substrate", Applied Physics A, 126, 455-11, 2020/05, SCI
"Non-destructive characterization of elastic properties on steel plate using laser ultrasound technique under high-temperature atmosphere", The International Journal of Advanced Manufacturing Technology, 108, 129-141, 2020/05, SCI
"Optimization of tribological parameters over WC-12%Co laser alloyed pearlitic ductile iron using Taguchi based Grey relational analysis", Journal Central South University, 27, 736−751, 2020/04, SCI
"Formation of FeCrMoVC Layers on AA6061 by Laser Cladding Process: Microstructure and Wear Characteristics", Transactions of Indian Institute of Metals, 73, 6, 1611-1617, 2020/03, SCI
"Microstructure and Wear Behaviour of SS420 Micron Layers on Ti–6Al–4V Substrate Using Laser Cladding Process", Transactions of Indian Institute of Metals, 73, 6, 1572-1533, 2020/03, SCI
"Comparative study of laser melting and pre‑placed Ni–20% Cr alloying over nodular iron surface", Archives of Civil and Mechanical Engineering, 20:20, 1-12, 2020/02, SCI
"Temperature dependent elastic modulus of HVOF sprayed Ni-5%Al on 304 stainless steel using nondestructive laser ultrasound technique", Surface & Coatings Technology, 385, 125404, 2020/01, SCI
"Improvement of tribo-mechanical properties of directionally solidified CM-247 LC nickel-based super alloy through laser material processing", The International Journal of Advanced Manufacturing Technology, 106, 4805–4814, 2020/01, SCI
"Longitudinal Guided Wave Inspection of Small-Diameter Elbowed Steel Tubes with a Novel Squirrel-Cage Magnetostrictive Sensor", Journal of Sensors, 2019, 1-9, 2020/01, SCI
"Investigation of high temperature wear performance on laser processed nodular iron using optimization technique", Result in Physics, 2019/12, SCI
"Characterization and tribological evaluation of NiCrMoNb and NiCrBSiC laser cladding on near-α titanium alloy", The International Journal of Advanced Manufacturing Technology, 2019/12, SCI
"Wear Tribo-Performances of Laser Cladding Colmonoy-6 and Stellite-6 Micron Layers on Stainless Steel 304 Using Yb: YAG Disk Laser", Metals and Materials International, 2019/11, SCI
"Laser cladding process of Cobalt and Nickel based hard-micron-layers on 316L-stainless-steel-substrate", Materials and Manufacturing Processes, 2019/11, SCI
"Microstructure and tribological evolution during laser alloying WC-12% Co and Cr3C2 25% NiCr powders on nodular iron surface", Result in Physics, 054038, 2019/03, SCI
"Enhancing the tribological properties of nodular cast iron using multi wall carbon nano-tubes (MWCNTs) as lubricant additives", Materials Research Express, 2019/01, SCI
"Characterization of Wedge Waves Propagating Along Wedge Tips with Defects", Ultrasonics, 82, 289-297, 2018/01, SCI
"Novel design of extension nozzle and its application on real-time injection molding process diagnosed by ultrasound", Sensors and Actuators A: Phyisical, 263, 430-438, 2017/07, SCI
"On-stream inspection for pitting corrosion defect of pressure vessels for intelligent and safe manufacturing", The International Journal of Advanced Manufacturing Technology, 91, 1957-1966, 2017/07, SCI
"Vibration Measurement Method of a String in Transversal Motion by Using a PSD", Sensors, 17, 1643, 2017/07, SCI
"The Use of Flexible Ultrasound Transducers for the Detection of Laser-Induced Guided Waves on Curved Surfaces at Elevated Temperatures", Sensors, 17, 1285, 2017/06, SCI
"Effect of degradation on non-linear ultrasonic behaviour of aged centrifugally-cast stainless steel", Insight: Non-Destructive Testing and Condition Monitoring i, 58, 3, 142-144, 2016/03, SCI
"Intelligent measurements for monitoring and control of glass production furnace for green and efficient manufacturing", The International Journal of Advanced Manufacturing Technology, 75, 339-349, 2014/07, SCI
"Anti-Symmetric Flexural Modes for the Detection of Humidity Variation", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 60(4), 771~776, 2013/04, SCI
"Laser ultrasound technique for material characterization of thermal sprayed nickel aluminum coatings in elevated temperature environment.", The Journal of the Acoustical Society of America, 131, 4, 3476, 2012/04, SCI
"Laser ultrasound technique for determine the guided waves propagation in layered medium with temperature gradients.", The Journal of the Acoustical Society of America., 131, 4, 3476, 2012/04, SCI
"A full-field mechanical property mapping with quantitative laser ultrasound visualization system.", The Journal of the Acoustical Society of America., 131, 4, 4377, 2012/04, SCI
"Guided waves propagating in a bi-layer system consisting of a piezoelectric plate and a dielectric fluid layer", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 50, 8, 1612-1618, 2011/08, SCI
"Characterization of Mechanical and Geometrical Properties of a Tube with Axially and Circumferentially Guided Waves", Ultrasonics, 51, 4, 472-479, 2011/01, SCI
"A novel procedure employing laser ultrasound technique and simplex algorism for the characterization of mechanical and geometrical properties in Zircaloy tubes with different levels of hydrogen charging", J. Nucl. Mater., 408, 1, 96-101, 2011/01, SCI
"Automatic data mining for telemetry database of computer systems", Microelectronics Reliability, 51, 2, 262-269, 2010/02, SCI
"A comparison on Laser Ultrasound Measurements and Finite Element Simulations for the Dispersion Behavior of Antisymmetric Flexural Modes Propagating along Wedge Tips with Coatings", IEEE UFFC, 12, 55, 2674-2682, 2008/12, SCI
"Dispersion Behaviors of Antisymmetric Flexural Modes Propagating along Wedge Tips with a Layer of Thin Coating", Jpn J. Appl. Phys, 46, 9A, 5935-5938, 2007/07, SCI
"A Study on the Antisymmetric Flexural Modes Propagating in Piezoelectric Wedges", Jpn J. Appl. Phys, 46, 9A, 5939-5943, 2007/07, SCI
"A Study on the Dispersion Behaviors of Antisymmetric Flexural Modes Propagating Along Wedges Tips with Coatings", IEEE Ultrasonics Symposium, 2007/07, EI
"A New Method for the Inspection of Tool Wear Based on the Dispersion of ASF Modes", IEEE Ultrasonics Symposium, 2007/07, EI
"A study on the dispersions of piezoelectric plate with laser ultrasound measurement and theoretical modeling", Ultrasonics, e807-811, 2006/07, SCI
"Non-destructive Characterization of Material Properties of Hydrogen-charged Zircalloy based on a Laser Ultrasonic Technique", Key Engineering Materials, 321, 323, 410-413, 2006/06, SCI
"An optical method for the detection of in-plane motion of acoustic waves propagating in solids", Key Engineering Materials, 321, 323, 91-94, 2006/06, SCI
"Dispersion behaviors of wedge waves propagating along wedges with bilinear cross sections", Key Engineering Materials, 321, 323, 765-769, 2006/06, SCI
"Laser Ultrasound Measurements and Finite Element Simulations on the Dispersion Behaviors of Acoustic Waves Propagating Along Wedges with Bilinear Cross Section, “ IEEE Transactions on Ultrasonics", Ferroelectrics, and Frequency Control, 53, 4, 754-760, 2006/06, SCI
"Dispersion Behaviors of Wedge Waves Propagating Along the Apex Line of Wedges with Bilinear Cross Section", Jpn. J. Appl. Phys.,, 44, 6A, 4189-4193, 2006/06, SCI
"Experimental and Numerical Investigations on the Dispersion Behaviors of Acoustic Waves Propagating Along Wedges with Bilinear Cross Section", Ultrasonics, 8, 26, e1471-1474, 2006/06, SCI
"An new optical method for the detection of in-plane motion of acoustic waves propagating in metals", Ultrasonics, 8, 26, e1239-1242, 2006/06, SCI
"雷射超音波原理", 量測資訊, 105, 18-26, 2005/07, ELSE1
"Broadband Dispersion Behaviors of Wedge Waves Propagating along Large-Angled Wedges", Journal of Mechanics, 21, 4, 4392-4393, 2005/06, SCI
"Dielectric and Mechanical Loading Effects of a Fluid on Lamb Waves Propagating in an Immersed Piezoelectric Plate", Journal of Mechanics, 21, 3, 179-186, 2005/06, SCI
"A Diffraction-based Optical Method for the Detection of In-Plane Motion of Lamb Waves", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 52, 8, 1372-1377, 2005/06, SCI
"Characterization of Hydrogen Concentration in Zircaloy with a PVDF/LFB Ultrasound-Based Nondestructive Technique", J. Nucl. Mater., 335, 359-365, 2004/06, SCI
"Broadband Laser Ultrasound Measurements on the Dispersion Relations of Acoustic Flexural Wedge Waves Propagating along Large-Angled Wedges", Jpn. J. Appl. Phys., 43, 7A, 2004/06, SCI
"Lamb Waves Propagating in an LiNbO3 Plate Under the Mechanical and Dielectric Loading of a Fluid", Jpn. J. Appl. Phys, 43, 4A, 1514-1518, 2004/06, SCI
"Characterization of silicon-based ultrasonic nozzles", Tanmkang Journal of Science and Engineering, 7, 2, 123-127, 2004/06, SCI
"Measurement and Modeling for the Dispersion Relations Lamb Waves Propagating in a Free Piezoelectric Plate", Chinese Journal of Applied Mechanics, 19, 5, 311-318, 2003/06, SCI
"A Study on the Dispersion Relations of Lamb Waves Propagating along LiNbO3 Plate with a Laser Ultrasound Technique", Jpn. J. Appl. Phys., 41, 6478-6483, 2002/06, SCI
Conference papers
"Flexible Ultrasonic Transducer for Laser Ultrasound Imaging of Defects in Curved Structures", (WCNDT 2016) 19th World Conference on Non-Destructive Testing, Munich, 2016/06/13
"A New Pattern of Acoustic Delay-Line Based on Wedge Wave", (WCNDT 2016) 19th World Conference on Non-Destructive Testing, Munich, 2016/06/13
"Fast Inversion Calculation for Full-field Measurement of Material Properties with Quantitative Laser Ultrasound Visualization System", (WCNDT 2016) 19th World Conference on Non-Destructive Testing, Munich, 2016/06/13
"Nondestructive measurement Material Characterization of Thermal Sprayed Nickel Aluminum Coatings by using laser ultrasound technique", 2015 ICU International Congress on Ultrasonics, Metz, 2015/05/10
"Material Characterization of Zircaloy tubes at Elevated Temperatures Using Laser Ultrasound", (USE2014) The 35th Symposium on Ultrasonic Electronics, 東京, 2014/12/03
"Laser Ultrasound Technique for Material Characterization of Thermal Sprayed Coatings", (USE2014) The 35th Symposium on Ultrasonic Electronics, 東京, 2014/12/03
"Application of Acoustic Delay-Line Based on Wedge Waves", (USE2014) The 35th Symposium on Ultrasonic Electronics, 東京, 2014/12/03
"Ultrasonic characterization for the influences of microstructure and graphite size in cast irons", (USE2014) The 35th Symposium on Ultrasonic Electronics, 東京, 2014/12/03
"Modeling Guided waves propagating in Bones with a Multilayer Model", 2014 IEEE, International Ultrasonics Symposium (IUS), Chicago, 2014/09/03
"Guided Waves in Material Characterization for 3D-printed Parts", 2014 IEEE, International Ultrasonics Symposium (IUS), Chicago, 2014/09/03
"Propagation behaviors of wedge waves interacting with defects along wedge tips", 2014 IEEE, International Ultrasonics Symposium (IUS), Chicago, 2014/09/03
"Ultrasonic Characterizations of Iron Casting with Different Heat Treatment Conditions", (USE2013) The 34th Symposium on Ultrasonic Electronics Organizing Committee, Kyoto, 2013/11/20
"Material characterization of thermally sprayed nickel aluminum coatings using a laser ultrasound technique", IEEE International Ultrasonics Symposium including Short Courses and Exhibition, Dresden, 2012/10/07
"Anti-symmetric Flexural Modes Propagating along a Wedge Tipwith a Defect", SPIE, 聖地亞哥, 2012/03/11
"Laser ultrasound technique for material characterization of Zircaloy cladding tubes in elevated temperature environment", The International Society for Optical. Engineering, 聖地亞哥, 2011/03/06
"Application of anti-symmetric flexural modes for the detection of moisture", The International Society for Optical. Engineering, 聖地亞哥, 2011/03/06
"Laser ultrasound technique for ray tracing investigation of Lamb wave tomography", The International Society for Optical. Engineering, 聖地亞哥, 2011/03/06
"Material characterization of duplex stainless steel with ultrasound Techniques", The 31st Symposium on Ultrasonic Electronic, 東京, 2010/12/06
"An investigation on ray tracing algorithms in Lamb wave tomography", Proceedings of Symposium on Ultrasonic Electronics, 東京, 2010/12/06
"Guided waves propagating on the wedge tips with a notch", The 31th Symposium on Ultrasonic Electronics, 東京, 2010/12/06
"Laser ultrasound technique for the determination of temperature profiles in layered medium", The 31st Symposium on Ultrasonic Electronic, 東京, 2010/12/06
"Application of Anti-Symmetric Flexural Modes for the Detection of Moisture", 第31屆超音波電子電機研討會(USE2010), 東京, 2010/12/06
"Measurement and Modeling for the Dispersion Behaviors of Porous Plates", The 31st Symposium on Ultrasonic Electronic, 東京, 2010/12/06
"Dispersion Behaviors of ASF Modes with Hygroscopic Film in Various Moistur", 第15屆非破壞檢測研討會, 高雄, 2010/11/18
"An Investigation on Wedge Waves and the Interaction with a Defect Using a Quantitative Laser Ultrasound Visualization System", IEEE Ultrasonics symposium, San Diego, 2010/10/11
"Acoustic Streaming Induced by Anti-symmetrical Flexural Modes near a Wedge Tip", 2010 IEEE International Ultrasonics Symposium (IUS), San Diego, 2010/10/11
"Automation of data mining for telemetry database of computer systems", 2010 International Symposium on Computer, Communication, Control and Automation, 台南, 2010/05/05
"Insight Into Information System Using Data Mining Technique", IEEE-2010 Prognostics & System Health Management conference (PHM), 2010/01/12
"Antisymmetric Flexural Modes Propagating along Wedge Tips with a Layer of Thin Coating", in World Congress on Ultrasonics, Vienna, 2007/09/01
"Nondestructive Characterization of Hydrogen Concentration in Zircaloy Tubes with Hydride Rims", in World Congress on Ultrasonics, Vienna, 2007/09/01
"Laser Ultrasound Technique for the Inspection of Tool Weear", in World Congress on Ultrasonics, Vienna, 2007/09/01
"Dispersion Behaviors of Wedge Waves Propagating along Wedge Tips with Coatings", in Ultrasonics for Electronics (USE), Japan, 2006/10/25
"Characterization of Circumferential Waves in Tubes with Laser Ultrasound Measurements and Theoretical Modeling", in Ultrasonics for Electronics (USE), Nagoya, 2006/10/25
"Wedge wave for machine tool inspection", in Ultrasonics for Electronics (USE), Nagoya, 2006/10/25
"The effects of fluid boundary conditions on the dispersion relations of guided waves propagating in piezoelectric plate", in Ultrasonics for Electronics (USE), Nagoya, 2006/10/25
"Nondestructive characterization of Zircaloy tubes with hydride rims", in Ultrasonics for Electronics (USE), Nagoya, 2006/10/25
"Wedge waves propagating along piezoelectric wedges with fluid loading", in Ultrasonics for Electronics (USE), Nagoya, 2006/10/25
"Characterization of Multilayered Tubes with Inhomogeneous Material Properties using Laser Ultrasound Technique", in Ultrasonics for Electronics (USE), Nagoya, 2006/10/25
"Non-destructive Characterization of Hydrogen Concentration in Zircalloy Cladding Tubes with Ultrasonic Techniques", 2005 Water Reactor Fuel Performance Meeting, Kyoto, 2005/11/01
"A New Optical Method for the Detection of In-Plane Motion of Ultrasound Propagating in Metals", Word Congress on Ultrasonics, Beijing, 2005/05/01
"Experimental and numerical investigations on the dispersion behaviors of wedge waves propagating along wedges with bilinear cross sections", Word Congress on Ultrasonics, Beijing, 2005/05/01
"A study on the dispersions of piezoelectric plate with laser ultrasound measurement and theoretical modeling", Word Congress on Ultrasonics, Beijing, 2005/05/01
"Application of Laser ultrasound technique for the characterization of hydrogen concentration in Zircaloy claddings tubes", Word Congress on Ultrasonics, Beijing, 2005/05/01
"An optical method for the detection of in-plane motion of acoustic waves propagating in solids", The 1st International Conference on Advanced Nondestructive Evaluation, Jeju, 2005/03/01
"Non-destructive Characterization of Material Properties of Hydrogen-charged Zircalloy based on a Laser Ultrasonic Technique", The 1st International Conference on Advanced Nondestructive Evaluation, Jeju, 2005/03/01
"Dispersion behaviors of wedge waves propagating along wedges with bilinear cross sections", The 1st International Conference on Advanced Nondestructive Evaluation, Jeju, 2005/03/01
