Professor／Department of Energy and Refrigerating Air-Conditioning Engineering
REACH OUT：
Journal articles
"Performance enhancement of latent heat thermal energy storage systems via dynamic melting process of PCM under different control strategies", Applied Thermal Engineering, 259, 124903, 1-20, 2025/01, SCI
"Enhancing the accuracy of physics-informed neural networks for indoor airflow simulation with experimental data and Reynolds-averaged Navier–Stokes turbulence model", Physics of Fluids, 36, 065161, 17, 2024/06, SCI
"Improvement of wind energy potential through building corner modifications in compact urban areas", Journal of Wind Engineering & Industrial Aerodynamics, 248, 105710, 21, 2024/05, SCI
"Accelerating flow simulations in the built environment by using the fast fluid dynamics initializer", Building and Environment, 253, 111274, 1-22, 2024/04, SCI
"‘Effect of wind-based climate- responsive design on city breathability of a compact high-rise city", Journal of Building Engineering, 78, 107773, 1-23, 2023/11, SCI
"Effect of void space arrangement on wind power potential and pressure coefficient distributions for high-rise void buildings", Journal of Building Engineering, 75, 107061, 23, 2023/09, SCI
"Effects of control zone, exhaust rate and station extent on smoke dispersal during emergency concourse fires in underground stations", International Journal of Thermal Sciences, 191, 108363, 1-23, 2023/09, SCI
"Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage", International Journal of Heat and Mass Transfer, 210, 124199, 1-22, 2023/08, SCI
"Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage", International Journal of Heat and Mass Transfer, 210, 124199, 1-22, 2023/08, SCI
"Effects of urban tree planting on thermal comfort and air quality in the street canyon in a subtropical climate", Sustainable Cities and Society, 91, 104334, 23, 2023/04, SCI
"Air side performance characterization of wavy fin-and-tube heat exchangers having elliptic tubes with large waffle heights", Applied Thermal Engineering, 217, 119220, 1-16, 2022/11, SCI
"CFD assessment of wind energy potential for generic high-rise buildings in close proximity: Impact of building arrangement and height", Applied Energy, 321, 102975, 1-22, 2022/09, SCI
"Numerical and experimental investigations on thermal management for data center with cold aisle containment configuration", Applied Energy, 307, 118213, 1-16, 2022/02, SCI
"Heat transfer of spray falling films over horizontal tubes with counter current airflows in an evaporative condenser", International Journal of Heat and Mass Transfer, 183, 122199, 1-16, 2022/02, SCI
"‘Effects of building setback on thermal comfort and air quality in the street canyon", Building and Environment, 208, 108627, 24, 2022/01, SCI
"A combined framework of integrating optimized half-open spaces into buildings and an application to a realistic case study on urban ventilation and air pollutant dispersion", Journal of Building Engineering, 44, 102975, 1-14, 2021/12, SCI
"Impacts of urban morphology on improving urban wind energy potential for generic high-rise building arrays", Applied Energy, 299, 117304, 23, 2021/10, SCI
"The effects of lateral entrainment on pollutant dispersion inside a street canyon and the corresponding optimal urban design strategies", Building and Environment, 195, 107740, 26, 2021/05, SCI
"Numerical assessments of wind power potential and installation arrangements in realistic highly urbanized areas", Renewable and Sustainable Energy Reviews, 135, 110165, 1-24, 2021/01, SCI
"Effects of height-asymmetric street canyon configurations on outdoor air temperature and air quality", Building and Environment, 183, 107195, 1-23, 2020/10, SCI
"Liquid film dispersion on horizontal circular tubes under spray impingement", International Journal of Heat and Mass Transfer, 160, 120223, 1-16, 2020/10, SCI
"Heat Transfer and Pressure Drop of Film Condensation in a Horizontal Minitube for HFO1234yf Refrigerant", Applied Energy, 274, 115183, 1-19, 2020/09, SCI
"Design and Analysis of a Valveless Impendence Pump for a Direct Sodium Borohydride-Hydrogen Peroxide Fuel Cell", Journal of Electrochemical Energy Conversion and Storage, Transactions of the ASME, 17, 031009, 6, 2020/08, SCI
"Effects of frontal area density on outdoor thermal comfort and air quality", Building and Environment, 180, 107028, 1-16, 2020/08, SCI
"Effect of counter current airflow on film dispersion and heat transfer of evaporative falling film over a horizontal elliptical tube", International Journal of Heat and Mass Transfer, 141, 964-973, 2019/10, SCI&EI
"Heat Transfer Characteristics of Obliquely Dispensed Evaporating Falling Films on an Elliptic Tube", International Journal of Heat and Mass Transfer, 132, 238-248, 2019/04, SCI&EI
"Microfluidics with New Multi-stage Arc-unit Structures for Size-based Cross-flow Separation of Microparticles", Microelectronic Engineering, 207, 37-49, 2019/02, SCI&EI
"DOE-FEM based design improvement to minimize thermal errors of a high speed spindle system", Thermal Science and Engineering Progress, 8, 525-536, 2018/10, SCI&EI
"Determination of Melt Pool Dimensions Using DOE-FEM and RSM with Process Window during SLM of Ti6Al4V Powder", Optics and Laser Technology, 103, 59-76, 2018/07, SCI&EI
"A New Micro-Hydrodynamic Herringbone Bearing Using Slant Groove Depth Arrangements for Performance Enhancement", Journal of Mechanics, 33, 10, 725-737, 2017/10, SCI
"Characteristic Studies of a Novel Piezoelectric Impedance Micropump", Microsystem Technologies, 23, 1709–1717, 2017/06, SCI
"FEM Simulations to Study the Effects of Laser Power and Scan Speed on Molten Pool Size in Additive Manufacturing", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 11, 7, 1131-1135, 2017/06, ELSE2
"Optimization procedures for enhancement of city breathability using arcade design in a realistic high-rise urban area", Building and Environment, 121, 247-261, 2017/05, SCI
"Numerical simulation of cooling effect of vegetation enhancement in a subtropical urban park", Applied Energy, 192, 178-200, 2017/04, SCI
"Investigation on Wind Environments of Surrounding Open Spaces around a Public Building", Journal of Mechanics, 33, 1, 113, 2017/02, SCI
"Enhancement of city breathability with half open spaces in ideal urban street canyons,", Building and Environment, 112, 322-336, 2017/02, SCI
"A new double-sided grating coupled optical sensor using a cross-shaped microchannel for minimizing the dispersion effect", Chemical Engineering Journal, 302, 707-716, 2016/10, SCI
"Optimization of lift force for a bio-inspired flapping wing model in hovering flight", International Journal of Micro Air Vehicles, 8, 2, 92-108, 2016/06, SCI
"Estimation of Wind Power Generation in a Dense Urban Area", Applied Energy, 171, 231-230, 2016/03, SCI
"CFD Simulations to Study the Cooling Effects of Different Greening Modifications", International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9, 7, 756-762, 2015/07, ELSE2
"Development of Piezoelectric Gas Micro Pumps with the PDMS Check Valve Design", International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9, 7, 986-991, 2015/07, ELSE2
"Design and Fabrication of an Array Microejector Driven by a Shear-Mode Piezoelectric Actuator", International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9, 7, 986-991, 2015/07, ELSE2
"Characterization of the Dispersion Phenomenon in an Optical Biosensor", International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9, 7, 998-1003, 2015/07, ELSE2
"A High-performance Micromixer Using Three-dimensional Tesla Structures for Bio-applications", Chemical Engineering Journal, 263, 444-451, 2015/03, SCI&EI
"A Lego®-like Swappable Fluidic Module for Bio-Chem Applications", Sensors & Actuators: B. Chemical, 204, 489-496, 2014/08, SCI&EI
"CFD Simulations to Examine Natural Ventilation of a Work Area in a Public Building", International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8, 7, 1137-1142, 2014/07, ELSE2
"Development of a New Piezoelectrically Actuated Micropump for Liquid and Gas", International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8, 7, 1143-1148, 2014/07, ELSE2
"Using the Central Ventilation Shaft Design within Public Buildings for Natural Aeration Enhancement", Applied Thermal Engineering, 70, 219-230, 2014/05, SCI&EI
"An Innovative Numerical Approach to Resolve the Pulse Wave Velocity in a Healthy Thoracic Aorta Model", Computer Methods in Biomechanics and Biomedical Engineering, 17, 5, 461-473, 2014/05, SCI&EI
"Investigation of Flow and Heat Transfer around Internal Channels of an Air Ventilation Vest", Textile Research Journal, 84, 4, 399-410, 2014/03, SCI
"FEM-based Modeling to Simulate Thermal Deformation Process for High-speed Ball Screw Drive Systems", Applied Mechanics and Materials, 481, 171-179, 2014/01, EI
"Wind Simulations for Studying Ecological Influences of Existing Guggenheim Museum Bilbao on the Urban Surroundings", Advanced Science Letters, 19, 2884-2890, 2013/10, ELSE2
"Development of a 3D-Tesla Micromixer for Bio-Applications", Proceedings of 2013 IEEE International Conference on Mechatronics and Automation (ICMA 2013), 152-157, 2013/08, EI
"CFD Simulations to Predict Comfort Level of Outdoor Wind Environment for Taipei Flora Exposition", Applied Mechanics and Materials, 421, 844-849, 2013/08, EI
"Investigation of a Piezoelectric Valveless Micropump with an Integrated Stainless-steel Diffuser/nozzle Bulge Piece Design", Smart Materials and Structures, 22, 085023, 2013/07, SCI&EI
"CFD Simulations of Natural Ventilation Effect: A Case Study of New Administrative Building of the Guanyin Township", Applied Mechanics and Materials, 368-370, 611-614, 2013/07, EI
"Thermal Deformation Estimation for a Hollow Ball Screw Feed Drive System", Proceedings of the World Congress on Engineering 2013, 3, 2047-2052, 2013/07, EI
"Wind Field Analysis for a High-rise Residential Building Layout in Danhai, Taiwan", Proceedings of the World Congress on Engineering 2013, 2, 843-848, 2013/07, EI
"Settling Studies of Underfill Particles for Flip-Chip Solder Interconnections", Proceedings of the World Congress on Engineering 2013, 3, 2109-2114, 2013/07, EI
"A Novel Vortex Mixer Actuated by One-Shot Electricity-Free Pumps", Chemical Engineering Journal, 228, 882-888, 2013/06, SCI&EI
"A real-time convective PCR machine in a capillary tube instrumented with a CCD-based fluorometer", Sensors & Actuators: B. Chemical, 183, 434-440, 2013/05, SCI&EI
"‘A Vacuum-pumped Microfluidic Device for Automated In-line Mixing and Focusing Processes", The eighth IEEE International Conference on Automation Science and Engineering (CASE 2012), pp. 109-114, 2012/08, EI
"A New Swappable Fluidic Module for Applications of Capillary Convective Polymerase Chain Reaction", The eighth IEEE International Conference on Automation Science and Engineering (CASE 2012), pp. 842-845, 2012/08, EI
"Pressure-Drop Studies of Resistance Components for Integration into a SFM-based Fluidic Circuit", The eighth IEEE International Conference on Automation Science and Engineering (CASE 2012), pp. 822-825, 2012/08, EI
"Attitude-Adjustment-Induced Sloshing Characteristics in a Satellite Propellant Tank", Journal of Mechanics, 28, 2, 261-268, 2012/06, SCI&EI
"Parametric Study and Optimization of Helix Configuration in Ribbed Lip Seal", Tribology International, 53, 98-107, 2012/05, SCI&EI
"Study of a Crossflow over a Zero-net-mass-flux Synthetic Jet Driven by a Vibrating Diaphragm", Journal of Mechanics, 27, 4, 503-509, 2011/12, SCI&EI
"Myth of Ecological Architecture Designs: Comparison between Design Concept and Computational Analysis Results of Natural-ventilation for Tjibaou Cultural Center in New Caledonia", Energy and Buildings, 43, 2788-2797, 2011/11, SCI&EI
"New Deflected-helix Ribbed Lip Seal with Enhanced Sealing Performance", Tribology International, 44, 2067-2073, 2011/11, SCI&EI
"An Axial Velocity Profile Method to Derive the Aortic Pulse-Wave Velocity in Diabetic Patients", Journal of Mechanics, 27, 3, 447-452, 2011/09, SCI&EI
"Determination of RFID Sensor Locations for an Adapted Air-Conditioning System in a Conference Room", Advanced Science Letters, 4, 8, 2790-2797, 2011/08, SCI&EI
"Using Air Curtain to Control Pollutant Spreading for Emergency Management in a Cleanroom", Building and Environment, 46, 1104-1114, 2011/05, SCI&EI
"CFD-based Optimization of a Diamond-Obstacles Inserted Micromixer with Boundary Protrusions", Engineering Applications of Computational Fluid Mechanics, 5, 2, 210-222, 2011/05, SCI&EI
"Flow Analysis of a Ribbed Helix Lip Seal with Consideration of Fluid-Structure Interaction", Computers & Fluids, 40, 324-332, 2011/01, SCI&EI
"Acoustic Streaming Induced by Anti-symmetrical Flexural Modes near a Wedge Tip", 2010 IEEE International Ultrasonics Symposium (IUS), 2010/10, EI
"Automated Control Solution for Contaminant Dispersal in a Cleanroom", Proceedings of the 8th IEEE International Conference on Industrial Informatics, 34-39, 2010/07, EI
"Hybrid motion planning of a planar robot for a tracking problem with singularity", Proceedings of the 8th IEEE International Conference on Industrial Informatics,, 505-510, 2010/07, EI
"Investigation of Pulsatile Flowfield in Healthy Thoracic Aorta Models", Annals of Biomedical Engineering, 38, 2, 391-402, 2010/02, SCI&EI
"Design Analysis of a Piezoelectrically Driven Synthetic Jet Actuator", Smart Materials and Structures, 18, 125004 (12pp), 2009/12, SCI&EI
"Performance Characterization of a Piezoelectric Micro SJA", Advanced Materials Research, 74, 223-226, 2009/07, EI
"Use of Micro Synthetic Jet Actuators for Boundary Layer Flow Control", Advanced Materials Research, 74, 157-160, 2009/07, EI
"Mixing Enhancement of a Passive Micromixer by Applying Boundary Protrusion Structures,", Advanced Materials Research, 74, 77-80, 2009/07, EI
"A Novel Piezoelectric Valveless Micropump with an Integrated Diffuser/Nozzle Bulge Piece Design", Advanced Materials Research, 74, 227-230, 2009/07, EI
"Experimental and Numerical Studies of Synthetic Jets Driven by a Dual-diaphragm Piezoelectric Actuator", Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C,, Vol. 223, 6, 1393-1400, 2009/06, SCI&EI
"An Analysis of the Flow Field around a Ribbed Helix Lip Seal", Tribology International, 42, 649-656, 2009/05, SCI&EI
"Investigation of Piezoelectrically Generated Synthetic Jet Flow", Journal of Visualization, 12, 1, 9-16, 2009/03, SCI&EI
"In Vitro Characterization of Aortic Flow Using Numerical Simulation, PC-MRI and Particle Tracking Images", Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, 222, 2455-2462, 2008/12, SCI&EI
"Investigation of Liquid-Gas Interfacial Shapes in Reduced Gravitational Environments", International Journal of Mechanical Sciences, 50, 1304-1315, 2008/08, SCI&EI
"Numerical Simulations of Three-Dimensional Hydrodynamic Focusing in a Flow Cytometer", Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, 222, 4, 679-687, 2008/04, SCI&EI
"Processing of PZT Actuator and Nickel Plate in a Multi-Droplets Microejector", Journal of Materials Processing Technology, 201, 683-688, 2008/03, SCI&EI
"PZT Actuator Applied to a Femto-liter Droplet Ejector", Journal of Mechanical Science and Technology, 21, 1338-1343, 2007/10, SCI&EI
"Numerical Study for the Impact of Liquid Droplets on Solid Surfaces", Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, 221, 293-301, 2007/04, SCI&EI
"Hydrodynamic Focusing Investigation in a Micro-flow Cytometer", Biomedical Microdevices, 9, 2, 113-122, 2007/04, SCI&EI
"Ejection Process Simulation for a Piezoelectric Micro-Droplet Generator", Transactions of ASME, Journal of Fluids Engineering, 128, 1144-1152, 2006/10, SCI&EI
"Plume Impingement Investigation Using Monte Carlo Computations", Journal of Aerospace Engineering, Proc Instn Mech Engrs, Part G, 220, 365-373, 2006/09, SCI&EI
"Computational Design Approach to Hydrodynamic Focusing in a Flow Cytometer", Lecture Notes in Bioinformatics(LNBI), Subseries of Lecture Notes in Computer Sciences (LNCS), 4115, 336-341, 2006/08, SCI&EI
"Investigation of Droplet Ejection Characteristics for a Piezoelectric Inkjet Printhead", Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, 220, 435-445, 2006/04, SCI&EI
"Droplet Formation Studies for a Piezo- actuated Micro-injector", Material Science Forum, 505-507, 415-420, 2006/01, SCI&EI
"Droplet Ejection Study of a Picojet Printhead", Journal of Micromechanics and Microengineering, 16, 180-188, 2006/01, SCI&EI
"Application of Neural Networks to Prediction of Phase Transport Characteristics in High-Pressure Two-Phase Turbulent Bubbly Flows", Nuclear Engineering and Design, 223, 295-313, 2003/08, SCI&EI
"Determination of Plume Impingement Disturbance Characteristics for ROCSAT-1 Satellite", Journal of Aerospace Engineering, Proc Instn Mech Engrs, Part G, 216, 237-247, 2002/10, SCI&EI
"Design Analysis of a Satellite Propulsion System", AIAA Journal of Propulsion and Power, 18, 2, 270-279, 2002/09, SCI&EI
Chapters
Prediction of Thermal Deformation for a Ball Screw System Under Composite Operating Conditions, 1, Springer Dordrecht Heidelberg New York London, 978-94-017-8831-1, 2014/01/15
Conference papers
"Numerical Investigation on Melting Behavior of PCM in Thermal Energy Storage Systems with and without Fins", International Conference on Applied Energy 2021, Bangkok, 2021/11/29
"Effect of airflow rate on operating performance for data centers with cold aisle containment configuration", The 12th International Conference on Applied Energy(ICAE2020), Bangkok, 2020/12/01
"Wind Flow Predictions Around Buildings Having Semi-open Spaces in Urban Canyons", Proceedings of the 2nd Thermal and Fluid Engineering Conference (TFEC2017) and 4th International Workshop on Heat Transfer (IWHT2017), Las Vegas, NV, 2017/04/02
"Predictions of Load Capacity in Thermo-hydrodynamic Lubrications Process for Herringbone Groove Bearings", Proceedings of the 2nd Thermal and Fluid Engineering Conference (TFEC2017) and 4th International Workshop on Heat Transfer (IWHT2017), Las Vegas, NV, 2017/04/02
"CFD Simulations to Determine the Loading Characteristics of a Micro-hydrodynamic Bearing at Different Designs of Herringbone Grooves", 2016 JSRAE Annual Conference, Kobe, 2016/09/06
"Development of s FEM-based Thermal Model for a High Speed Spindle System", 2016 International Conference on Engineering and Natural Science (ICENS 2016), Kyoto, 2016/07/11
"CFD Simulations to Study the Cooling Effect of Urban Vegetation on Outdoor Thermal Environment", The 8th Asian Conference on Refrigeration and Air Conditioning (ACRA2016), Taipei, 2016/05/15
"Numerical Simulations of Thermal Deformation for a Feed Drive System", The First Pacific Rim Thermal Engineering Conference, (PRTEC), Hawaii's Big Island, 2016/03/12
"Study of Dispersion Phenomenon for an Optical Sensor with a Dual-cross-shaped Microchannel,", The First Pacific Rim Thermal Engineering Conference, (PRTEC), Hawaii's Big Island, 2016/03/12
"Flow Study of a Micro- hydrodynamic Bearing with Herringbone Grooves", The First Pacific Rim Thermal Engineering Conference, (PRTEC), Hawaii's Big Island, 2016/03/12
"Time-varying Flow Characteristics of a Cross-flow Fan", Proceedings of the 7th Asian Conference on Refrigeration and Air Conditioning (ACRA2014), Jeju, Korea, 2014/05/19
"CFD Assessments of Installation Sites of Wind Power on an Urban Building", Proceedings of the 7th Asian Conference on Refrigeration and Air Conditioning (ACRA2014), Jeju, Korea, 2014/05/19
"Coupled Mixing and Focusing Flow Studies for a Unified Vacuum-pumped Microfluidic Device", The Sixth International Conference on Quantum, Nano and Micro Technologies (ICQNM 2012), 羅馬, 2012/08/19
"Thermal Deformation Estimation for a Ball Screw Feed Drive System", The 19th National Computational Fluid Dynamics Conference, Paper No. CFD19-077, Penghu, 2012/08/17
"Application of CFD Analysis in Designing a Novel Vortex Mixer", The 18th National Computational Fluid Dynamics Conference, Paper No, Yilan, 2011/08/05
"Development of a Novel SMA-Tuned Micromixer", 3rd International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA’11), Dresden, 2011/07/18
"Design and Fabrication of a Novel SMA-Actuated Microvalve", 3rd International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA’11), Dresden, 2011/07/18
"Design and Fabrication of a Novel SMA-Actuated Microvalve", 3rd International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA’11), Dresden, 2011/07/18
"Trajectory Planning in SMA-actuated Parallel Manipulators", 3rd International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA’11), Dresden, 2011/07/18
"Effective Placement of RFID Sensors in a Meeting Room", The 27th Conference on Mechanical Engineering, CSME, Taipei, Taiwan, 2010/12/10
"Acoustic Streaming Induced by Anti-symmetrical Flexural Modes near a Wedge Tip", 2010 IEEE Ultrasonics Symposium, San Diego, California, 2010/10/11
"Hybrid motion planning of a planar robot for a tracking problem with singularity,", 8th IEEE International Conference on Industrial Informatics, Osaka, 2010/07/13
"Automated Control Solution for Contaminant Dispersal in a Cleanroom", 8th IEEE International Conference on Industrial Informatics, Osaka, 2010/07/13
"Flow Pattern of a Synthetic Jet in a Turbulent Boundary Layer Crossflow,", http://isfv14.org/, Daegu, 2010/06/21
"Study of Pumping Flow Pattern with Fluid-Structure Coupling Analysis for a Ribbed Helix Lip Seal", ISFV14-14th International Symposium on Flow Visualization, Daegu, 2010/06/21
"Analysis of Blood Flow Patterns in a Thoracic Aorta Model with Flow-stress Coupling Calculations", ISFV14-14th International Symposium on Flow Visualization, 2010/06/21
"Design Studies of Piezoelectric Micro-Synthetic Jet Actuator (SJA) and its Application to Active Flow Control", 2009 AASRC Aerospace Joint Conference, Taiwan, 2009/12/11
"Performance Characterization of a Piezoelectric Micro SJA", ICMAT- International Conference on Materials for Advanced Technologies, Symposium L, NEMS/MEMS Technology and Devices, Singapore, 2009/06/28
"Use of Micro Synthetic Jet Actuators for Boundary Layer Flow Control", ICMAT- International Conference on Materials for Advanced Technologies, Symposium L, NEMS/MEMS Technology and Devices, Singapore, 2009/06/28
"A Novel Piezoelectric Valveless Micropump with an Integrated Diffuser/Nozzle Bulge Piece Design", ICMAT- International Conference on Materials for Advanced Technologies, Symposium L, NEMS/MEMS Technology and Devices, Singapore, 2009/06/28
"Mixing Enhancement of a Passive Micromixer by Applying Boundary Protrusion Structures", ICMAT- International Conference on Materials for Advanced Technologies, Symposium L, NEMS/MEMS Technology and Devices, Singapore, 2009/06/27
"Study of Pulsatile Flowfield in Thoracic Aorta Model", 2008 International Symposium on Biomedical Engineering, Tao-Yuan, 2008/12/13
"Attitude-Adjustment-Induced Sloshing Characteristics in a Satellite Propellant Tank", 2008 AASRC Aerospace Joint Conference, Taipei, 2008/12/06
"Study of a Piezoelectric Valveless Micropump", The 25nd Conference on Mechanical Engineering, CSME, Chang-Hua, 2008/11/29
"Experimental and Numerical Studies of Synthetic Jets Driven by a Dual-diaphragm Piezoelectric Actuator", ISFV13 - 13th International Symposium on Flow Visualization, Paper No. 71,, Nice, 2008/06/30
"Investigation of Pulsatile Blood Flowfield in Healthy Thoracic Aorta Model", ISFV13 - 13th International Symposium on Flow Visualization, Nice, 2008/06/30
"Study of Ejection Flow Characteristics of a Discharge Pump Injector", 2007 AASRC Aerospace Joint Conference, Pingtung, 2007/11/16
"Study of Slosh Phenomenon in Satellite Propellant Tank", 2007 AASRC Aerospace Joint Conference, Pingtung, 2007/11/16
"Development of Test Platform for a Novel Motorcycle Fuel Injector", The 12th National Conference on Vehicle Engineering, Pingtung, 2007/11/16
"Study of Piezoelectric-Actuated Synthetic Jet Flow", The 9th Asian Symposium on Visualization, Hong Kong, 2007/06/04
"Study of Interfacial Phenomenon in Low-gravity Environments", The 9th Asian Symposium on Visualization, Hong Kong, 2007/06/04
"Characterization of In Vitro Aortic Flows", The 9th Asian Symposium on Visualization, Hong Kong, 2007/06/04
