Professor／Graduate Institute of Materials Science and Engineering
REACH OUT：
Journal articles
"Microstructures evolution and properties of titanium vacuum sintering on metal injection molding 316 stainless steel via dip coating process", Journal of Manufacturing Processes, 2025/01, SCI&EI
"Microstructural evolution, phase transformation, and mechanical properties of Corrax-Ta40Nb60C-VC composite using vacuum sintering, solid-solution, sub-zero, and aging treatments", Journal of Alloys and Compounds, Vol. 1010, 177356, 2025/01, SCI&EI
"Microstructures evolution and properties of titanium vacuum sintering on metal injection molding 316 stainless steel via dip coating process", Journal of Manufacturing Processe, Vol. 131, 1073-1085, 2024/12, SCI&EI
"Enhancement of the compressive performances of additive manufactured Corrax maraging stainless steel lattice by heat treatment", Journal of Materials Research and Technology, Vol. 33, 1640-1653, 2024/11, SCI&EI
"Microstructure, mechanical properties, and wear behaviors of CrSiN films on oxynitriding-treated Vanadis 60 high-speed steel by the direct current magnetron sputtering process", Thin Solid Films, 2024/07, SCI&EI
"Microstructure, material characteristics and mechanical properties of CoMoNiTa3 medium-entropy alloys through the vacuum hot pressing process", Powder Metallurgy, Vol. 67, No.2-3, 154-168, 2024/06, SCI&EI
"Novel functionally-graded material design of additive manufactured Corrax maraging stainless steel lattice", Materials and Design, Vol. 241, 112942, 2024/05, SCI&EI
"Investigation of the microstructural characteristics and mechanical properties of vacuum-sintered Ti-8Mo-3Mn-xVC composites", Vacuum, Vol. 222, 113035, 2024/04, SCI&EI
"Effect of Mn content on mechanical properties and corrosion resistance of Ti-8Mo-xMn alloys through the vacuum sintering process", Vacuum, Vol. 222, 112959, 2024/04, SCI&EI
"Improving the corrosion and wear resistance of CoCrNiSi0.3 Medium-Entropy Alloy by magnetron sputtered (CrN/Cr)x multilayer film", Surface & Coatings Technology, Vol. 478, 130407, 2024/02, SCI&EI
"Microstructure, strengthening mechanism and mechanical properties of Vanadis 60-Ta0.5Nb0.5C-B4C high-speed steel composite via vacuum sintering, sub-zero, and heat treatment", ISIJ International, Vol. 64, No.1, 154-164, 2024/01, SCI&EI
"Effect of TaC Powder Addition on the Microstructure and Mechanical Properties of Ti-Nb-Mn Alloy via Vacuum Sintering Process", Materials Transactions, Vol. 64, No.12, 2714-2721, 2023/12, SCI&EI
"The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel", Materials Science and Engineering: A, Vol. 887, 145744, 2023/11, SCI&EI
"Effects of the microstructure and strengthening mechanisms of Mo2C powders being added to Ti-8Nb-4Co alloy via the vacuum sintering process", Archives of Metallurgy and Materials, Vol. 68, No. 4, 1255-1265, 2023/11, SCI&EI
"Effects of the vacuum hot pressing process on the microstructures, strengthening mechanisms and mechanical properties of Ni-35Cr-12Mo-3Nb alloys", Vacuum, Vol. 213, 112139, 2023/07, SCI&EI
"Novel laser powder bed fusion Corrax maraging stainless steel lattice with superior specific strength and energy absorption", Journal of Materials Research and Technology, Vol. 25, 5240-5248, 2023/07, SCI&EI
"Improvement of the wear resistance and corrosion properties of CrN Films on oxynitriding-treated Vanadis 23 high-speed steel by the DC magnetron sputtering process", Materials Transactions, Vol. 64, No. 7, 1631-1637, 2023/07, SCI&EI
"Microstructure, retained austenite, and mechanical properties evaluation of Vanadis 60-HfC-Ta0.6Nb0.4C steel matrix composite by vacuum sintering, sub-zero and heat treatments", Vacuum, Vol. 210, 111885, 2023/04, SCI&EI
"In situ TEM observation of the microstructure characteristics on the vacuum sintering, sub-zero and heat treatments of Vanadis 23 high-speed steel by adding Cr3C2-TaC-TiC powders", Powder Metallurgy, Vol. 66, No. 2, 151-163, 2023/04, SCI&EI
"Improvement of corrosion and wear resistance of CoCrNiSi0.3 medium-entropy alloy by sputtering CrN film", Materials, Vol. 16, Issue 4, 1482, 2023/02, SCI&EI
"Influence of the vacuum hot pressing process on the microstructure, mechanical properties, and material characteristics of CrCoNiTa3 alloys", Vacuum, Vol. 207, 111637, 2023/01, SCI&EI
"Investigation of the wear and corrosion behaviors of CrN films onto oxynitriding-treated AISI H13 alloy steel by the Direct Current magnetron sputtering process", Thin Solid Films, Vol. 758, 139434, 2022/09, SCI&EI
"Investigation of the microstructure and strengthening mechanisms of Ti-6Cu-8Nb-xCr3C2 alloy through vacuum sintering process", Archives of Metallurgy and Materials, Vol. 67, No. 3, 815-825, 2022/06, SCI&EI
"Study on the microstructure, electrical and mechanical properties of hot pressing sintering Cr50Ni50 alloys fabricated by adding various ratios of nanosized nickel powers", Aechies of Metallurgy and Materials, Vol. 67, No. 3, 955-961, 2022/06, SCI&EI
"Investigation of the vacuum hot pressing process on the mechanical properties, microstructures and material characteristics of Ni-35Mo-15Cr alloys", Powder Metallurgy, Vol. 65, No. 2, 141-150, 2022/04, SCI&EI
"Wear and Corrosion Resistance of CrN Films on Oxynitriding-treated Vanadis 8 Tool Steel via the DC Magnetron Sputtering Process", ISIJ International, Vol. 62, No. 1, 218-226, 2022/01, SCI&EI
"Optimization of DLC films on oxynitriding-treated Vanadis 10 tool steel through the various duty cycles of dc-pulsed plasma enhanced CVD", Kovov materily - Metallic Materials, Vol. 59, No. 2, 109-118, 2021/05, SCI&EI
"Evaluation of the strengthening mechanism and mechanical properties of high alloyed PM 23NbCTaC composite materials through vacuum sintering sub-zero and heat treatments", Vacuum, Vol. 187, 110132, 2021/05, SCI&EI
"valuation of the microstructures, strengthening mechanisms and corrosion behaviors of TiB2 powder added to Ti-8Ta-6Ni alloys through the vacuum sintering process", Journal of Alloys and Compounds, Vol. 857, 157629, 2021/03, SCI&EI
"In situ TEM observation of the microstructural characteristics and mechanical properties of vacuum hot-press sintered Co-30Cr-6Mo alloys", Vacuum, Vol. 176, Article 109333, 2020/06, SCI&EI
"Characteristics of DLC/oxynitriding duplex-treated V8 tool steel by dc-pulsed PECVD", Surface Engineering, Vol. 36, No. 5, 516-523, 2020/05, SCI&EI
"Investigation of the strengthening mechanism and corrosion behaviors of Vanadis 4 extra tool steel adding ZrCTiC powders through vacuum sintering, and sub-zero and heat treatments", Powder Metallurgy, Vol. 63, No. 2, 104-115, 2020/05, SCI&EI
"Microstructure and properties of composite produced by vacuum sintering of Vanadis 4 Extra steel powder with tantalum carbides and following heat treatment", Archives of Metallurgy and Materials, Vol. 65, No. 2, 555-563, 2020/05, SCI&EI
"Study on the Sintered Characteristics and Properties of Co-30 mass% Cr Alloys under Various Vacuum Hot-Press Sintering Temperatures and Pressures", Archives of Metallurgy and Materials, Vol. 65, No. 1, 393-402, 2020/02, SCI&EI
"Evaluation of the microstructure and properties of Cr3C2 powders added to Vanadis 4 alloy steel via vacuum sintering and heat treatments", Kovové Materiály- Metallic Materials, Vol. 57, No. 5, 317-327, 2019/09, SCI&EI
"The effects of adding nano-scaled niobium carbide on the microstructure, mechanical strength and polarization resistance of Ti-8Mo-4Co-xNbC (1, 3, 5 wt%) powder alloys", Materials Chemistry and Physics, Vol. 235, Article 121743, 2019/09, SCI&EI
"Mechanical Properties and Microstructures of Mo2C Strengthened Vanadis 4 Extra Alloy Steel by Powder Metallurgy and Heat Treatments", ISIJ International, Vol. 59, No. 7, 1353-1361, 2019/07, SCI&EI
"Effect of CrSi/CrSi2 content on the microstructure and properties of vacuum hot-pressed Cr-50 wt% Si alloys", Vacuum, Vol. 162, 54-62, 2019/04, SCI&EI
"Effect of vacuum hot-press process on the sintered characteristics and mechanical properties of a high-density Cr-31.2 mass% Ti alloy", Archives of Metallurgy and Materials, Vol. 63, No. 4, 1715-1723, 2018/11, SCI&EI
"Microstructural Characteristics and Properties of Adding Vanadium Carbide Powders to Vanadis 4 Tool Steel through Vacuum Sintering and Heat Treatments", Materials Transactions, Vol. 59, No. 10, 1596-1602, 2018/10, SCI&EI
"Effect of Process Parameters on the Microstructure and Mechanical Properties of Vacuum Hot-Press Sintered Co-50 mass% Cr Alloys", Powder Metallurgy, Vol. 61, No. 4, 323-333, 2018/09, SCI&EI
"Enhancement of the Wear and Corrosion Resistance of DLC/oxynitriding Duplex-treated PM30 Steel by the Asymmetric Bipolar-pulsed Plasma Enhanced CVD", ISIJ International, Vol. 58, No. 8, 1510-1518, 2018/08, SCI&EI
"Effect of the Mechanical Properties and Corrosion Behaviors of Nickel-Cadmium Duplex Electroplated AISI 4340 Steel by Using Various Solid Solution Treatments", Materials Transactions, Vol. 59, No. 3, 406-411, 2018/03, SCI&EI
"Characteristics and properties of Ti-8Mo-6Cr alloys with added NbC powders through the vacuum sintering process at various temperatures", Materials Transactions, Vol. 58, No. 11, 1581-1586, 2017/11, SCI&EI
"Investigation of vacuum hot-press sintering temperatures on the sintered characteristics of Cr-31.2 wt% Ti alloys,", Materials Transactions, Vol. 58, No. 8, 1190-1196, 2017/08, SCI&EI
"Microstructures, mechanical properties and corrosion behaviors of NbC added to Vanadis 4 tool steel via vacuum sintering and heat treatments", Vacuum, Vol. 142, 123-130, 2017/08, SCI&EI
"Microstructures and mechanical properties of TaC added to Vanadis 4 tool steel through vacuum sintering and heat treatments", ISIJ International, Vol. 57, No. 7, 1252-1260, 2017/07, SCI&EI
"Microstructure, mechanical properties and corrosion behavior of NbC modified AISI 440C stainless steel by vacuum sintering and heat treatments", Journal of Alloys and Compounds, Vol. 712, 760-767, 2017/07, SCI&EI
"Deposition of DLC Films onto Oxynitriding-treated V4E High Vanadium Tool Steel through DC-pulsed PECVD Process", Materials Transactions, Vol. 58, No.5, 806-812, 2017/05, SCI&EI
"Investigation of the microstructures, mechanical properties and corrosion behaviours of Ti-8Mo-6Ni alloys adding NbC powders via vacuum sintering process", MATEC web of Conferences, Vol. 109, 1-6, 2017/05, EI
"Improvement of the wear and corrosion behaviors of DLC/oxynitriding duplex-treated PM60 high-speed steel via various power densities of DC-pulsed plasma enhanced CVD", ISIJ International, Vol. 56, No. 12, 2276-2283, 2016/12, SCI&EI
"Study on the properties of WC-10Co alloys adding Cr3C2 powder via various vacuum sintering temperatures", Journal of Alloys and Compounds, Vol. 686, 810-815, 2016/11, SCI&EI
"Change in Microstructure, Mechanical Strength and Corrosion Resistance of Ti-8Mo-xNi Alloys through Various Sintering Temperatures", Materials Transactions, Vol. 57, No.8, 1363-1369, 2016/08, SCI&EI
"Cr50Cu50 alloys produced from submicron structured powders through hot pressing at different pressures", Powder Metallurgy, Vol. 59, No. 2, 142-147, 2016/06, SCI&EI
"Investigation of the Characteristics of Submicron Structured Powders Fabricated Cr50Ni50 Alloys via Different Hot-Press Sintering Pressurs", Materials Transactions, Vol. 57, No. 5, 732-737, 2016/05, SCI&EI
"Effects of Particle Size of Pre-Alloy Powders and Vacuum Sintering Temperatures on the Microstructure and Mechanical Properties of 440C Stainless Steel", ISIJ International, Vol. 56, No. 2, 335-340, 2016/02, SCI&EI
"Deposition of DLC/oxynitriding films onto JIS SKD11 steel by bipolar-pulsed PECVD", ISIJ International, Vol. 55, No. 12, 2631-2638, 2015/12, SCI&EI
"Study on the sintered characteristics and properties of nanostructured WC–15 wt% (Fe–Ni–Co) and WC–15 wt% Co hard metal alloys", Journal of Alloys and Compounds, Vol. 649, 89-95, 2015/12, SCI&EI
"Preparation and Sintering of Indium-Gallium-Zinc Oxide Ceramics with Different Zinc Oxide Contents", Journal of the European Ceramic Society, Vol. 35, 3893-3902, 2015/11, SCI&EI
"Strengthening of 440C Stainless Steel with TaC Powders via Vacuum Sintering and Heat Treatments on Microstructures and Mechanical Properties", Materials Transactions, Vol. 56, No. 9, 1585-1590, 2015/09, SCI&EI
"Influence of Pre Deformation of 5052H112 Alloy on Tensile Properties and Fracture Resistance under Vibration", Materials Transactions, Vol. 56, No. 2, 236-241, 2015/02, SCI&EI
"Investigation of the characteristics of DLC films on oxynitriding-treated ASP23 high speed steel by", Surface and Coatings Technology, Vol. 261, 331-336, 2015/01, SCI&EI
"Study on the mechanical properties, microstructure and corrosion behaviors of nano-WC-Co-Ni-Fe hard materials through HIP and hot-press sintering processes", Materials Science & Engineering A, Vol. 618, 56-62, 2014/12, SCI&EI
"Optimizing the efficiency of anhydrous ethanol purification via regenerable molecular sieve", Applied Energy, Vol. 135, 483-489, 2014/12, SCI&EI
"The Effects of HIP, Solution Heat Treatmens and Aging Treatments on the Microstructure and Mechanical Properties of Sintering Cobalt-based Alloys Strengthened with Tantalum Carbide Additive", Materials Transactions, Vol. 55, No. 11, 1755-1761, 2014/11, SCI&EI
"Study on the Microstructure and Mechanical Properties of Cobalt-based Alloys Strengthened with Tantalum Carbide powder via Vacuum Sintering and HIP Treatments", Materials Transactions, Vol. 55, No. 10, 1623-1629, 2014/10, SCI&EI
"Investigation into the sintered behavior and properties of nanostructured WC-Co-Ni-Fe hard metal alloys", Materials Science and Engineering: A, Vol. 606, 150-156, 2014/06, SCI&EI
"Effects of Properties on S45C Carbon Steel by Electroless Ni-P Adding Al2O3 Powder of Composite Deposition and Various Heat Treatments", IOP Conference Series: Materials Science and Engineering (MSE), Vol. 58, 1-6, 2014/06, EI
"Characterization and Properties of Sintered WC-Co and WC-Ni-Fe Hard Metal Alloys", Journal of Alloys and Compounds, Vol. 585, 407-413, 2014/02, SCI&EI
"Microstructure and mechanical properties of cobalt-based alloys strengthened with tantalum carbide powder via vacuum sintering and HIP treatments", Materials Transactions, 55, 10, 1623-1629, 2014/01, SCI
"Improvement of the tribological properties of DLC/oxynitriding duplex-treated AISI H13 alloy steel", ISIJ International, Vol. 54, No. 1, 193-198, 2014/01, SCI&EI
"Characterization of the MC Carbides and Mechanical Properties in a TiC Particles Strengthened Cobalt-based Alloy through HIP, Solid-Solution and Aging Treatments", Materials Transactions, Vol. 54, No. 10, 2049-2054, 2013/10, SCI&EI
"Effects of Vacuum Sintering, HIP and HP Treatments on the Microstructure, Mechanical and Electrical Properties of Cr70Cu30 Alloys", Materials Transactions, Vol. 54, No. 9, 1857-1862, 2013/09, SCI&EI
"Improvement of Mechanical and Electrical Properties on the Sintered Ni-50 mass% Cr Alloys by HIP Treatment", Materials Transactions, Vol. 54, No. 6, 1034-1039, 2013/06, SCI&EI
"Electroless Ni-P plating and Heat Treatments on S45C Carbon Steel", IOP Conference Series: Materials Science and Engineering (MSE), Vol. 46, 1-6, 2013/06, EI
"Effects of MC Carbide Precipitates on the Microstructure and Mechanical Properties of Cobalt-Based Alloys Adding TiC Powder via Vacuum Sintering Process", Materials Transactions, Vol. 54, No. 3, 399-404, 2013/03, SCI&EI
"Improvement in Sintering Characteristics and Electrical Properties of Cr60Cu40 Alloy Targets by Hot Isostatic Pressing Treatment", Powder Metallurgy, Vol. 56, No. 1, 77-82, 2013/02, SCI&EI
"Effect of Particle Size and Vacuum Sintering Temperature on Phase Composition and Mechanical Properties of WC-12 wt% Co Hardmetals", Key Engineering Materials, Vol.531-532, 3-7, 2013/01, EI
"Study on the Microstructures, Electrical Resistance and Mechanical Properties of Chromium Target by Hot Pressing, Hot Isostatic Pressing and Canning-HIP Processes", International Journal of Refractory Metals and Hard Materials, Vol. 35, 70-75, 2012/12, SCI&EI
"Study on the Sintered Behaviors and Electrical Properties of Cr50Cu50 Alloy Targets via Vacuum Sintering and HIP Treatments", Materials Transactions, Vol. 53, No. 9, 1689-1694, 2012/09, SCI&EI
"Study on the thermal erosion, wear and corrosion behaviors of TiAlN/Oxynitriding duplex-treated AISI H13 alloy steel", Surface and Coatings Technology, Vol. 207, 571-578, 2012/08, SCI&EI
"The Impact Toughness and Fracture Behavior of Ni-containing Powder Metal Steels", Advanced Materials Research, Vol. 538-541, 1594-1600, 2012/06, EI
"Effects of Thermal Erosion and Wear Resistance on AISI H13 Tool Steel", Materials Transactions, Vol. 53, No. 4, 745-751, 2012/04, SCI&EI
"Effects of Post-Oxidizing Treatment on Melting Loss and Corrosion Resistance of Gas Nitrided AISI H13 Tool Steel", ISIJ International, Vol. 52, No. 3, 499-504, 2012/03, SCI&EI
"The Effects of Adding TiC Powders to VANADIS 4 Tool Steel by HIP Treatment", Advanced Materials Research, Vol. 413, 426-431, 2012/02, EI
"Effects of Gamma' Precipitation on the Structure and Properties of 713LC Superalloy via HIP Treatment", Materials Transactions, Vol. 53, No. 2, 446-452, 2012/02, SCI&EI
"Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP treated Alloy 718", Applied Mechanics and Materials, Vol. 117-119, 1315-1318, 2012/01, EI
"Effects of sintering process and heat treatments on microstructures and mechanical properties of VANADIS 4 tool steel added with TiC powders", Powder Metallurgy, Vol. 54, No. 4, 507-512, 2011/10, SCI&EI
"Enhancement of Thermal Cracking and Mechanical Properties of H13 Tool Steel by Shot Peening Treatment", Surface Engineering, Vol. 27, No. 8, 581-586, 2011/10, SCI&EI
"Effects of vacuum sintering temperature on mechanical properties and electric resistancefor Cr50–Si50 optical target", Powder Metallurgy, Vol. 54, No. 3, 325-330, 2011/07, SCI&EI
"Effect of HIP temperature on microstructure and tensile properties of 713LC cast superalloy", International Journal of Cast Metals Research, Vol. 24, No. 2, 113-117, 2011/04, SCI
"Effects of sintering Processes on composite tool steels containing self-synthesized TiC", ISIJ International, Vol. 50, No. 10, 1453-1459, 2010/10, SCI&EI
"Influence of γ˝ and δ Precipitations on the Microstructural Properties of 718 alloy through HIP, Solid-Solution, and different Aging Heat Treatments", Materials Transactions, Vol. 51, No. 9, 1683-1688, 2010/09, SCI&EI
"X-ray diffraction analysis on unburned carbon refined from fly ash", Journal of Raman Spectroscopy, Vol. 41, No. 9, 933-937, 2010/09, SCI&EI
"Effects of Microstructural evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment", Advanced Materials Research, Vol. 129-131, 1114-1118, 2010/08, EI
"Improvement of Aluminum Erosion Behavior and Corrosion Resistance of AISI H13 Tool Steel by Oxidation Treatment", ISIJ International, Vol. 50, No. 4, 569-573, 2010/04, SCI&EI
"In Situ TEM Observation of γ´, γ˝ and δ Precipitations on Inconel 718 superalloy through HIP Treatment", Journal of Alloys and Compounds, 486, 2, 716-721, 2009/11, SCI&EI
"The Influence of Canning HIP Treatment on the Microstructure Characters of Cr35-Si65 and Cr50-Si50 Targets", Materials Transactions, Vol. 50, No. 4, 885-890, 2009/04, SCI&EI
"Optimization of Pressure and Soaking Time of HIP Treatment on 713LC Cast Superalloy", Materials Transactions, Vol. 50, No. 4, 909-916, 2009/04, SCI&EI
"Enhancement of erosion resistance on AISI H13 tool steel by Oxynitriding Treatment", ISIJ International, Vol. 49, No. 3, 421-424, 2009/03, SCI&EI
"Effects of HIP Treatment on the Microstructure and Properties of Cr35-Si65 Target", Materials Transactions, Vol. 50, No. 2, 395-400, 2009/02, SCI&EI
"Effects of the Temperature of Hot Isostatic Pressing treatment on Cr-Si Target", Ceramics International, Vol. 35, No. 2, 565-570, 2009/02, SCI&EI
"Effect of Shot Peening Treatment on Forging Die Life", Materials Transactions, Vol. 49, No. 3, 619-623, 2008/03, SCI&EI
"Effects of Particle Size on Mechanical Properties of a TiC Containing Tool Steel by Hot Isostatic Press", Materials Transactions, Vol. 49, No. 3, 624-628, 2008/03, SCI&EI
"Effects of HIP Treatment on the Microstructure of Cr50-Si50 Target", Materials Transactions, Vol. 49, No. 2, 382-386, 2008/02, SCI&EI
"Powder Metallurgy Process and Physical-Mechanical Properties of Cr-Si alloy", Materials Science and Engineering of Powder Metallurgy, Vol. 12, No. 6, 374-379, 2007/12, EI
"Properties and Microstructure of Cr-Si target material manufactured by Hot Isostatic Press", Materials Science and Engineering of Powder Metallurgy, Vol. 12, No. 5, 277-283, 2007/10, EI
"Improvement the Microstructure and Tensile Properties of Inconel 718 Superalloy by HIP treatment", Materials Transactions, Vol. 47, No. 11, 2877-2881, 2006/11, SCI&EI
"Effects of the temperature of HIP process on the characteristics of Inconel 718 superalloy", International Journal of Cast Metals Research, Vol. 19, No. 3, 175-180, 2006/06, SCI
"Evaluation of the HIP pressure on Inconel 718 superalloy", International Journal of Cast Metals Research, Vol. 19, No. 3, 181-187, 2006/06, SCI
"Influences of Soaking Time in Hot Isostatic Pressing on Strength of Inconel 718 Superalloy", Materials Transactions, Vol. 47, No. 2, 426-432, 2006/02, SCI&EI
Recent Trends in Nanotechnology and Materials Science / Improving the Surface Hardness and Wear Resistance of S45C Carbon Steel via Various Heat Treatments and pH values of Electroless Ni-P Deposition., 1, Springer-Verlag, ISBN 978-3-319-04515-3, 2014/06/01
"Investigation of adding NbC-TaC powders to PM23 high-speed steel by vacuum sintering and HIP treatment", The 6th International Conference on Powder Metallurgy in Asia, Gyeongju, 2023/11/27
"Study on the microstructures and properties of 440C steel bonded TiC Cermets combined with Ni、Mo and WC Additions", The 6th International Conference on Powder Metallurgy in Asia, Gyeongju, 2023/11/27
"Improving the mechanical properties of 316L PM compacts through alloy design", The 6th International Conference on Powder Metallurgy in Asia, Gyeongju, 2023/11/27
"Investigation of the microstructures, mechanical properties and corrosion behaviours of Ti-8Mo-6Ni alloys adding NbC powders via vacuum sintering process", 2st International Conference on Materials Science and Nanotechnology, ICMSNT 2017, 奧克蘭, 2017/04/19
"Effects of adding NbC powders to AISI 440C tool steel by vacuum sintering and HIP treatments", The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
"Study on the properties of WC-Ni-Fe hard metal alloys by vacuum sintering and HIP treatments", The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
"Effects of carbide additives on the microstructures and mechanical properties of vacuum sintering Ti-based alloy", 2015海峽兩岸粉末冶金研討會, 中國武漢, 2015/09/09
"Effects of hot-pressed sintering on the microstructure and mechanical properties of Cr80Cu20 alloys via added extra-fine nanostructured Cr powders", 2015海峽兩岸粉末冶金研討會, 中國武漢, 2015/09/09
"Effects of Properties on S45C Carbon Steel by Electroless Ni-P Adding Al2O3 Powder of Composite Deposition and Various Heat Treatments", 2014 International Conference on Manufacturing, Optimization, Industrial and MaterialEngineering (MOIME 2014), 雅加達, 2014/03/29
"Effect of hypereutectoid copper contents on the microstructures and mechanical properties of vacuum sintered Ti-Cu-Mo alloy", 2nd International Conference Powder Metallurgy in AISA (APMA 2013), Xiamen, 2013/11/03
"Effects of Hot Isostatic Pressing Process on the Corrosion Properties and Microstructures of Ni-Cr Sintered Alloy", 2nd International Conference Powder Metallurgy in AISA (APMA 2013), Xiamen, 2013/11/03
"Electroless Ni-P plating and Heat Treatments on S45C Carbon Steel", 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering, Bandung, 2013/03/09
"Effect of Particle Size and Vacuum Sintering Temperature on Phase Composition and Mechanical Properties of WC-12 wt% Co Hardmetals", 2012 International Conference on Materials Science and Nanotechnology, Guangzhou, 2012/11/16
"The Impact Toughness and Fracture Behavior of Ni-containing Powder Metal Steels", The 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), Zhuhai, 2012/07/06
"The Effects of Adding TiC Powders to VANADIS 4 Tool Steel by HIP Treatment", The 2nd International Conference on Materials Science and Engineering Applications (ICMSEA 2012), Xi'an, 2012/01/07
"Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP treated Alloy 718", 2011 International Conference on Applied Mechanics, Materials and Manufacturing, Shenzhen, 2011/11/18
"Choosing the Suitable Tooling Material Hardness - Changing the Hardness for Applications", 2011年海峽兩岸粉末冶金技術研討會, 廣州, 2011/08/26
"Effect of η phase on the Microstructure and Mechanical Properties of G5 Tungsten Carbide Material by different Vacuum Sintering Temperature", 2011年海峽兩岸粉末冶金技術研討會, 廣州, 2011/08/26
"Effects of Microstructural evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment", 2010 International Conference on Material and Manufacturing Technology, Chongqing, 2010/09/17
"Mechanical Properties of TiC-Strengthened Cr/V Containing Tool Steels", 9th International Conference on Hot Isostatic Pressing, California, 2008/05/06
