Professor／Graduate Institute of Manufacturing Technology
REACH OUT：
Journal articles
"Design of FDM fabricated poly-lactic acid parts with forced-air cooling speed as the new control parameter to tune its shape memory effect", Smart Materials and Structures, 33, 085047, 2024/07, SCI
"The improvement in corrosion resistance of electroless Ni-P coating on micro-arc oxidized AZ31 alloy prepared with SDS additive and post-supercritical CO2 mixed electrolyte", Journal of Materials Engineering and Performance, 2024/07, SCI
"Deep-eutectic solution with threonine additive associating with supercritical carbon dioxide to enhance zinc electroplating characteristics", Materials Today Communications, 38, 107941, 2024/03, SCI
"Study on the fastening property of precision locknut under simulated dynamic impact loading with consideration of interference factors", Journal of Mechanics, 20, 1, 19-30, 2024/01, SCI
"5 MW風機葉片於不同風速之流固耦合模擬及結構設計分析", 應用聲學與振動學刊, 15, 1, 1-10, 2023/12, EI
"Design and noise-reduction simulation of an acoustic metamaterial plate incorporating tunable shape memory cantilever absorbers", Journal of Vibroengineering, 24, 4, 793-805, 2022/06, EI
"An Experimental Study on the Torsional Stiffness and Limit Torque of a Jaw Coupling with Consideration of Spacer’s Hardness and Installation Methods", Journal of Mechanics, 38, 195-203, 2022/05, SCI
"The effect of heat treatment on the corrosion resistance of iron-based amorphous alloy coatings prepared by high velocity oxygen fuel method", Materials, 14, 7818, 2021/12, SCI
"A Study on Corrosion and Corrosion-Wear Behavior of Fe-based Amorphous Alloy Coating Prepared by High Velocity Oxygen Fuel Method", Journal of Materials Research and Technology, 15, 4880-4895, 2021/11, SCI
"Identifying Individuals with Mild Cognitive Impairment using Working Memory Induced Intra-Subject Variability of Resting-State EEGs", Frontiers in Computational Neuroscience, 15, 700467, 2021/08, SCI
"MCI Detection using Kernel Eigen-Relative-Power Features of EEG Signals", Actuators in Robotic Control, 10, 152, 2021/07, SCI
"Improvement prediction on the dynamic performance of epoxy composite used in packaging by using nano-particle reinforcements in addition to 2-hydroxyethyl methacrylate toughener", Materials, 14, 4193, 2021/07, SCI
"The study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying", Journal of Alloys and Compounds, 867, 159132, 2021/02, SCI
"Corrosion of High- Velocity-Oxygen-Fuel (HVOF) Sprayed Non-crystalline Alloy Coating in Marine Environment", Surface and Coatings Technology, 409, 126896, 2021/02, SCI
"A Two-way Linear Piezoelectric Vibratory Conveyor Actuated by a Composite Sinusoidal Voltage Input", Journal of Vibroengineering, 2021/01, SCI
"The Influences of Corrosion on the Tightening and Anti-loosening Properties of a Flank-Locking Precision Locknut", Journal of Mechanics, 37, 44-52, 2020/12, SCI
"The Influence of Corrosion on the Anti-loosening Performance of a Precision Locknut Subjected to Rotation and Periodic Impact", Journal of Mechanics, 36, 3, 295-303, 2020/06, SCI
"Corrosion and Biocompatibility Behavior of the Micro-Arc Oxidized AZ31B Alloy in Simulated Body Fluid", International Journal of Electrochemical Science, 15, 6, 6405-6424, 2020/06, SCI
"The use of surfactants and supercritical CO2 assisted processes in the electroless nickel plating of printed circuit board with blind via", Materials Chemistry and Physics, 241, 122418, 2019/12, SCI
"Influence of hydraulic domain on vibration control and overload prediction of high-speed punching press: multi-domain modelling and experiment", Shock and Vibration, 2019, 8547104, 2019/10, SCI
"A Study on the Corrosion and Wear Behavior of Nanocrystalline Ni-Mo Electrodeposited Coatings", Surface & Coatings Technology, 366, 1, 286-295, 2019/03, SCI
"The Effect of Immersion Corrosion on the Surface Morphology of a Flank-locking Precision Locknut", Experimental Techniques, 2019/01, SCI
"Controllable Preload Spindle with a Piezoelectric Actuator for Machine Tools", International Journal of Machine Tools and Manufacture, 139, 60-63, 2019/01, SCI
"The influence of forced-air cooling on a 3D printed PLA part manufactured by fused filament fabrication", Additive Manufacturing, 25, 1, 196-203, 2019/01, ELSE2
"Study on the Contact Performance of Electronic EON Connectors under Axial Vibration", IEEE Transactions on Components, Packaging and Manufacturing Technology, 8, 12, 2090-2097, 2018/12, SCI
"Interval Type-2 Fuzzy Vibration Control of Multiple-degree-of-freedom Structure Using Shape-memory-material Absorber", Sensors and Materials, 30, 11, 2455-2467, 2018/11, SCI
"DOE-FEM Based Design Improvement to Minimize Thermal Errors of a High Speed Spindle System", Thermal Science and Engineering Progress, 8, 525-536, 2018/11, SCI
"Dynamic Simulation of a Metamaterial Beam Consisting of Tunable Shape Memory Material Absorbers", Vibration, 1, 81-92, 2018/07, ELSE2
"The Influences of Monoethanolamine Additive on the Properties of Nickel Coating Electroplated in Post Supercritical Carbon Dioxide Mixed Watts Bath", Surface and Coatings Technology, 337, 1, 323-340, 2018/01, SCI
"Optimization on the performance of a precision flank-locking locknut considering the machining and operational parameters", Journal of Mechanics, doi.org/10.1017/jmec, 2017/09, SCI
"Vibration Control Design for a Plate Structure with Electrorheological ATVA Using Interval Type-2 Fuzzy System", Applied Sciences, 7, 7, 707, 2017/07, SCI
"Nickel Electroplating in Post Supercritical CO2 Mixed Watts Bath under Different Agitations", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 11, 7, 1187-1193, 2017/07, ELSE2
"Discharge Performance of Zinc Coating Prepared by Pulse Electroplating with Different Frequencies for Application in Zinc-Air Battery", Surface and Coatings Technology, 319, 378-385, 2017/04, SCI
"Incorporating Piezoelectric Energy Harvester in Tunable Vibration Absorber for Application in Multi-modal Vibration Reduction of A Platform Structure", Journal of Sound and Vibration, 389, 1, 73-88, 2017/01, SCI
"Development of a Real-time Measurement Device for Monitoring the Internal Stress during Electroplating", Experimental Techniques, 41, 1, 51-57, 2017/01, SCI
"Investigation on the Corrosion Resistance of Trivalent Chromium Conversion Passivate on Electroplated Zn-Ni Alloy", Surface and Coating Technology, 305, 241-248, 2016/08, SCI
"Vibration control of a structure using a shape memory material absorber based on fuzzy system", Applied System Innovation, 971-975, 2016/03, EI
"The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9, 7, 1281-1284, 2015/08, ELSE2
"Design and Implementation of Tunable Multi-DOF Vibration Absorber Made of Hybrid Shape Memory Helical Springs", Journal of Intelligent Material Systems and Structures, DOI: 10.1177/1045389, 2015/07, SCI
"Experimental Application of a Vibration Absorber in Structural Vibration Reduction Using Tunable Fluid Mass Driven by Micropump", Journal of Sound and Vibration, 348, 1, 31-40, 2015/06, SCI&EI
"Fabrication of Ni-Mn Micro-Probe Structure with Low Internal Stress and High Hardness by Employing DC Electrodeposition", Advances in Materials Science and Engineering, 2014, 890814, 2014/04, SCI
"System Identification and Semi-active Control of a Squeeze-mode Magneto-rheological Damper", IEEE/ASME Trans. Mechatronics, 18, 6, 1691-1701, 2013/12, SCI
"Mn-Doped Zn2SiO4 Thin Film with Green Fluorescence Enhanced by Ag Nano-Island Surface Plasmon Effect", Japanese Journal of Applied Physics, 52, 11NJ03, 2013/11, SCI
"HER Catalytic Activity of Electrodeposited Ni-P Nanowires under the Influence of Magnetic Field", Journal of Nanomaterials, 2013, 191728, 2013/10, SCI
"Investigation of a piezoelectric valveless micropump with an integrated stainless steel diffuser/nozzle bulge-piece design", Smart Materials and Structures, 22, 8, 085023, 2013/07, SCI
"An Electroplating Technique using the Post Supercritical Carbon Dioxide Mixed Electrolyte", Surface & Coatings Technology, 232, 234-239, 2013/05, SCI
"Effect of Annealing Temperature on the Mechanical Properties and the Spherical Indentation of NiTi Shape Memory Alloy", Lecture Notes in Electrical Engineering, 234, 1, 765-772, 2013/05, EI
"Structural Vibration Control Using a Tunable Hybrid Shape Memory Material Vibration Absorber", Journal of Intelligent Material System and Structure, 23, 15, 1725-1734, 2012/10, SCI
"The relationship between nano crystallite structure and internal stress in Ni electrodeposited films plated by the supercritical CO2 method", Journal of The Electrochemical Society, 159, 6, D393-D399, 2012/04, SCI
"Theoretical and Experimental Design of a New Flexible Hinged Positioning Stage", Journal of Chinese Society of Mechanical Engineers, 33, 1, 59-66, 2012/04, SCI
"Study on the internal stress of nickel coating electrodeposited in an electrolyte mixed with supercritical carbon dioxide", Surface & Coating Technology, 206, 14, 3201-3207, 2012/03, SCI
"Design Methodology for the Minimization of Contact Width between Pressure Lip Seal and Shaft", Journal of Chinese Society of Mechanical Engineers, 32, 5, 51-60, 2011/10, SCI
"Synergy between Corrosion and Wear of Electrodeposited Ni-P Coating in NaCl Solution", Tribology International, 44, 12, 1603-1609, 2011/10, SCI
"Analyzing mechanical properties of a nanocrystalline Fe-Ni coating by nanoindentation", Journal of Material Research, 26, 19, 2533-2542, 2011/09, SCI
"CFD-based Optimization of a Diamond-Obstacles Inserted Micromixer with Boundary Protrusions", Engineering Applications of Computational Fluid Mechanics, 5, 2, 210-222, 2011/06, SCI
"The Electrocatalytic Activity of Electrodeposited Ni-P Micro-patterned Structure in Acidic Solution", Journal of Chinese Society of Mechanical Engineers, 32, 2, 103-109, 2011/04, SCI
"Wear and Corrosion Investigation on the Electrodeposited Ni-P Coating", Tribology Transactions, 54, 4, 497-504, 2011/04, SCI
"A Novel Inflatable Belt-Type Clamp in Open Heart Surgery", Journal of Mechanics, 27, 1, 57-62, 2011/03, SCI
"Study of the Corrosion Behavior of Nanocrystalline Ni-P Electrodeposited Coating", Metallurgy and Materials Transaction A, 41A, 2, 451-459, 2010/02, SCI
"Internal Stress Control of Nickel-Phosphorus Electrodeposits using Pulse Currents", Journal of The Electrochemical Society, 157, 3, D154-D158, 2010/02, SCI
"Study on the electrodeposition of Ni-P nanowires and their electrocatalytic properties", Metallurgy and Materials Transaction A, 41A, 2, 768-774, 2010/02, SCI
"Effect of impact velocity on the indentation of thick composite laminate", Experimental Techniques, 33, 4, 59-64, 2009/07, SCI
"Lateral vibration of a composite stepped beam consisted of SMA helical spring based on equivalent Euler-Bernoulli beam theory", Journal of Sound and Vibration, 324, 1-2, 179-193, 2009/07, SCI
"Wear and Immersion Corrosion of Ni-P Electrodeposit in NaCl Solution", Tribology International, doi:10.1016, 2009/07, SCI
"Localized electrochemical deposition process improvement by using different anodes and deposition directions", Journal of Micromechanics and Microengineering, 18, 10, 105008, 2008/09, SCI
Conference papers
"Intelligent Acoustic Metamaterial Plate Using Double-Cantilever Vibration Absorbers Made of Shape Memory Alloy Wire", The 20th International Conference on Automation Technology (Automation 2023), Taipei, 2023/12/08
"PLI-Based Connectivity in Resting-EEG is a Robust and Generalizable Feature for Detecting MCI and AD: A Validation on a Diverse Multisite Clinical Dataset", 45th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Sydney, 2023/07/24
"Vibration Characteristics of a Tunable Metamaterial Plate Incorporating Shape Memory Alloy Absorbers with U-Shaped Cantilever", International Conference on Mechanical, Materials and Renewable Energy, Reykjavík, 2023/07/02
"The Use of Supercritical CO2 in the Electroplating of Nickel Coating for its Performance Improvement", The 6th International Conference on Precision Machinery and Manufacturing Technology, Kenting, Pintung, 2021/05/21
"Finite Element Analysis of an Acoustic Metamaterial Plate Incorporating Tunable Shape Memory Cantilever Absorbers", 10th Asian pacific Conference on Aerospace Technology and Science & The 4th Asian Joint Symposium on Aerospace Engineering, 新竹市, 2019/08/28
"Design and Simulation of an Acoustic Metamaterial Plate Incorporating Tunable Shape Memory Cantilever Absorbers", 47th International Summer School-Conference “Advanced Problems in Mechanics –2019”, St. Petersburg, 2019/06/24
"CAE Analysis on the Mechanical Properties of a 3D-Printed Lattice Structure from Ti-6Al-4V for Biomedical Applications", 15th International Conference of Computational Methods in Science and Engineering, Rhodes Island, 2019/05/01
"Dynamic Analysis on a Metamaterial Beam Consisted of Tunable Shape Memory Alloy Absorbers", 2nd International Conference on Research, Innovation and Commercialization (ICRIC-2018), Zagreb, 2018/07/16
"A Tuned Vibration Absorber Constituted of Shape Memory Alloy Wires for Vibration Reduction of Platform Structures: Design and Implementation", ICPMMT 2018 - The 3rd International Conference on Precision Machinery and Manufacturing Technology, 奧克蘭, 2018/02/04
"Nickel Electroplating in Post Supercritical CO2 Mixed Watts Bath under Different Agitations", ICMAME 2017: 19th International Conference on Mechanical, Aeronautical and Manufacturing Engineering, 巴塞隆納, 2017/07/28
"Photoluminescence of ZnO Film Prepared by Annealing Zn Coating Electrodeposited in Post-Supercritical CO2 Mixed Sulfate Bath", Proceedings of 2016 ICENS-Summer, Kyoto, 2016/07/12
"Development of a FEM-based Thermal Model for a High Speed Spindle System", Proceedings of 2016 ICENS-Summer, Kyoto, 2016/07/12
"Study of Vibration Control Using a Tunable Vibration Absorber Made of Hybrid Shape Mem¬ory Helical Springs", Proceedings of 2016 ICENS-Summer, Kyoto, 2016/07/12
"Advanced Driving Assistant System (ADAS) based on Kalman Filter for Heavy Fog Condition", 9th IPS-International Collaboration Symposium on Information, Production and Systems, Kitakyushu, 2015/11/16
"A Device for Measuring the Internal Stress Evolution during Electroplating", Proceedings of the 9th IPS-International Collaboration Symposium on Information, Production and Systems, Kitakyushu, 2015/11/16
"The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress", ICMAAE 2015: 17th International Conference on Mechanical, Aeronautical and Automotive Engineering, Paris, 2015/07/20
"The Effects of NaF Concentration on the Zinc Coating Electroplated in Supercritical CO2 Mixed Zinc Chloride Bath", ICMSMM 2014: International Conference on Materials Science, Metals and Manufacturing, Prague, 2014/07/10
"Current Density Effect on Nickel Electroplating Using Post Supercritical CO2 Mixed Watts Electrolyte", ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Stockholm, 2013/07/15
"Vibration Control of a Cantilever Beam Using a Tunable Vibration Absorber Embedded with ER Fluids", ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Stockholm, 2013/07/15
"Mn-doped Zn2SiO4/Ag nano-islands for green fluorescence thin film enhanced by surface plasmon effect", ISPlasma 2013, Nagoya, 2013/01/28
"Annealing effect on the microstructure and optical characteristics of Mn, Si co-doped ZnO thin film sputtered on quartz glass", ISPlasma 2013, Nagoya, 2013/01/28
"Effect of Annealing Temperature on the Mechanical Properties and the Spherical Indentation of NiTi Shape Memory Alloy", 1st International Conference on Intelligent Technologies and Engineering Systems, 彰化市, 2012/12/13
"Feasibility of using post supercritical CO2 mixed electrolyte for nano-crystalline nickel electrodeposition", The Third International Conference on Sensor Device Technologies and Applications, 羅馬, 2012/08/19
"Effect of electroplating parameters and additives on the internal stress of Ni deposits plated in supercritical CO2 method", Annual International Conference on Materials Science, Metal & Manufacturing, Singapore, 2011/12/12
"Mechanical Behavior of A SMA Helical Spring with Two-Way Shape Memory Effect", 2010 Conference on Precision Machinery and Manufacturing Technology, 屏東墾丁, 2010/05/21
"The HER property of electrodeposited Ni-P electrode with micro-patterned structure", 2010 International Conference on Optics, Photonics and Energy Engineering, 武漢, 2010/05/10
"Vibration Tuning of A Platform Suspended by Hybrid Shape-Memory Helical Springs", The 16th International Congress on Sound and Vibration, 克拉科, 2009/07/05
