按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

Ho-Chiao Chuang

TITLE:
Professor/Department of Mechanical Engineering
REACH OUT:

Journal articles

  • "Partially oxidized MXenes for energy storage applications", Progress in Materials Science, 28, 24, 45274, 2025/01, SCI
  • "Deciphering rhodamine B dye degradation via the non-radical (O) pathway:toxicological assessment using Zebra fish (Danio rerio) and Yeast Cells", Journal of Water Process Engineering, 32, 1, 128, 2024/11, SCI
  • "Supercritical-CO2 mediated preparation of porous carbon from Araucaria heterophylla biomass: A proficient nanomolar detection platform for phenolic water pollutant", Chemosphere, 12, 3, 12478, 2024/11, SCI
  • "Eggshell derived hydroxyapatite reinforced nickel electrodeposition via post-supercritical-CO2 approach: Enhanced electrochemical corrosion resistance for seascape applications", Journal of Molecular Liquids, 35, 1, 126543, 2024/09, SCI
  • "Synergistic photocatalytic degradation of Crystal violet dye using novel medical wastederived carbon/ZnO composite: A study on toxicological assessment", Process Safety and Environmental Protection, 147, 1, 175412, 2024/07, SCI
  • "Nitrogen-sulphur dual doped reduced graphene oxide-polydiphenylamine supported PdSn nanocomposite: A bimetallic electrocatalyst for methanol electro-oxidation in alkaline solution", Materials Science & Engineering B, 304, 2, 117363, 2024/06, SCI
  • "Ultrasound-Mediated Lysozyme Microbubbles Targeting NOX4 Knockdown Alleviate Cisplatin-Exposed Cochlear Hair Cell Ototoxicity", International Journal of Molecular Sciences, 25, 0, 7096, 2024/06, SCI
  • "Simple co-precipitation synthesis of activated carbon-cobalt ferrite (AC-CoFe2O4) nanocomposites: enhanced photocatalytic dye degradation and antimicrobial activity", Zeitschrift fur Physikalische Chemie, 238, 4, 631-641, 2024/04, SCI
  • "Fabrication of M-type barium ferrite (BaFe12O19) grafted reduced graphene oxide (BF@rGO) nanocomposite using ethyl imidazolium lactate ionic-liquid: An effective electrode modifier for caffeic acid sensor", Ceramics International, 45, 41, 121452, 2024/04, SCI
  • "Computer-aided diagnosis of Duchenne muscular dystrophy based on texture pattern recognition on ultrasound images using unsupervised clustering algorithms and deep learning", Ultrasound in Medicine & Biology, 31, 1, 12457, 2024/04, SCI
  • "Phase-controlled preparation of cubic facet zeolitic imidazole framework-8-derived carbon using supercritical-CO2 medium: A solitary carbon material for symmetric supercapacitor", Carbon, 22, 1, 12578, 2024/03, SCI
  • "Supercritical CO2 mediated construction of aluminium waste recovered γ-Al2O3 impregnated Dracaena trifasciata biomass-derived carbon composite: A robust electrocatalyst for mutagenic pollutant detection", Journal of Colloid & Interface Science, 121, 12, 124555, 2024/01, SCI
  • "Simple co-precipitation synthesis of activated carbon-cobalt ferrite (AC-CoFe2O4) nanocomposites: enhanced photocatalytic dye degradation and antimicrobial activity", Zeitschrift fur Physikalische Chemie, 124, 3, 421, 2023/12, SCI
  • "Development and Evaluation of Ultrasound Image Tracking Technology Based on Mask R-CNN Applied to Respiratory Motion Compensation System", Quantitative Imaging in Medicine and Surgery, 22, 2, 102512, 2023/10, SCI
  • "In-situ fabrication of manganese ferrite grafted polyaniline nanocomposite: A magnetically reusable visible light photocatalyst and a robust electrode material for supercapacitor", Journal of Colloid & Interface Science, 22, 12, 275745, 2023/05, SCI
  • "Rhodamine B dye degradation using used face masks-derived carbon coupled with peroxymonosulfate", Environmental Pollution, 21, 1, 12475, 2023/04, SCI
  • "A new class of layered Bi2O2S nanopetals by one-pot supercritical-CO2 approach: A reliable electrocatalyst for analgesic bioflavonoid detection", Chemosphere, 30, 1, 154240, 2023/04, SCI
  • "A biogenesis construction of CuO@MWCNT via Chenopodium album extract: An effective electrocatalyst for synaptic plasticity neurodegenerative drug pollutant detection", Environmental Science and Pollution Research, 21, 3, 134545, 2023/03, SCI
  • "Recovery of Al2O3 from hazardous Al waste as a reinforcement particle for high-performance Ni/Al2O3 corrosion resistance coating via ultrasonic-aided supercritical-CO2 electrodeposition", Chemosphere, 31, 2, 421, 2023/03, SCI
  • "Coherent construction of recovered γ-Al2O3 embedded N-doped activated carbon by supercritical-CO2 pathway: Robust hybrid electrode material for energy storage device", Journal of Alloys and Compounds, 22, 2, 112, 2023/02, SCI
  • "Treatment efficacy of low-dose 5-fluorouracil with ultrasound in mediating 5-fluorouracil-loaded microbubble cavitation in head and neck cancer", Drug Delivery, 23, 1, 123144, 2023/01, SCI
  • "Combined use of microbubbles of various sizes and single-transducer dual-frequency ultrasound for safe and efficient inner ear drug delivery", Bioengineering & Translational Medicine, 124, 12, 145464, 2022/12, SCI
  • "Efficiency improvement of the Air-cooled packaged water chiller unit with three-phase alternating current control technology", Case Studies in Thermal Engineering, 40, 0, 102518, 2022/12, SCI
  • "3D-flower-like porous neodymium molybdate nanostructure for trace level detection of organophosphorus pesticide in food samples", Food Chemistry, 15, 45, 124758, 2022/12, SCI
  • "Construction of zinc-cobalt alloy film by supercritical-CO2 electrodeposition pathway: Evaluation of electrochemical robustness", Inorganic Chemistry Communications, 105, 45, 145987, 2022/12, SCI
  • "Mechanisms of ultrasound-microbubble cavitation for inducing the permeability of human skin", Journal of Controlled Release, 20, 11, 130256, 2022/11, SCI
  • "Combining the wavelet transform with a phase-lead compensator to a respiratory motion compensation system with an ultrasound tracking technique in radiation therapy", Biomedical Signal Processing and Control, 25, 3, 58-65, 2022/10, SCI
  • "Sansevieria trifasciata biomass-derived activated carbon by supercritical-CO2 route: electrochemical detection towards carcinogenic organic pollutant and energy storage application", Electrochimica Acta, 32, 4, 32-43, 2022/09, SCI
  • "Malic acid pathway of constructing high-performance Ni anticorrosive coatings using supercritical-CO2 electrodeposition", Materials Science in Semiconductor Processing, 32, 2, 25-32, 2022/07, SCI
  • "Study on the application of a granite composite material in five-axis CNC-VMC machine Tool", Journal of Physics: Conference Series, 2345, 1, 012022, 2022/05, SCI
  • "Post-supercritical CO2 electrodeposition approach for Ni-Cu alloy fabrication: An innovative eco-friendly strategy for high-performance corrosion resistance with durability", Applied Surface Science, 22, 2, 124456, 2022/03, SCI
  • "Robust fabrication of silver pyro-vanadates via sonochemical approach for advanced energy storage application", Journal of Alloys and Compounds, 25, 2, 112, 2022/02, SCI
  • "The efficiency improvement of induction motor with constant speed for belt drive mechanism", Energy Efficiency, 65, 02, 12357, 2021/11, SCI
  • "The feasibility of an approximate irregular field dose distribution simulation program applied to a respiratory motion compensation system", Physica Medica-European Journal of Medical Physics, 25, 2, 125-132, 2021/08, SCI
  • "Development of a thermosensitive poloxamer 407-based microbubble gel for ultrasound-mediated inner ear drug delivery", Drug Delivery, 25, 1, 668465, 2021/06, SCI
  • "Influence of ultrasonic combined supercritical-CO2 electrodeposition process on copper film fabrication: Electrochemical evaluation", Ultrasonics Sonochemistry, 74, 1, 105555, 2021/05, SCI
  • "Application of ultrasound-mediated adapalene-coated lysozyme-shelled microbubbles in UVA-induced skin photoaging", PLOS ONE, 25, 1, 0232617, 2021/05, SCI
  • "High-performance anti-corrosion behavior of graphene oxide decorated nickel coating by novel ultrasonic-assisted supercritical-CO2 electrodeposition approach", Electrochimica Acta, 15, 12, 24652, 2021/05, SCI
  • "Minoxidil-Coated Lysozyme-Shelled Microbubbes Combined With Ultrasound for the Enhancement of Hair Follicle Growth: Efficacy In Vitro and In Vivo", Frontier Pharmacology, 27, 1, 668754, 2021/04, SCI
  • "Ultrasonic-assisted supercritical-CO2 electrodeposition of Zn-Co film for high-performance corrosion inhibition: A greener approach", Ultrasonics Sonochemistry, 32, 2, 165-167, 2021/03, SCI
  • "Prediction of the normal contact stiffness between elastic rough surfaces in lubricated contact via an equivalent thin layer", Journal of Vibration and Control, 22, 1, 124456, 2021/02, SCI
  • "Synthesis of nitrogen-doped carbon quantum dots@Fe2O3/multiwall carbon nanotubes ternary nanocomposite for the simultaneous electrochemical detection of 5-fluorouracil, uric acid, and xanthine", Journal of Molecular Liquids, 331, 1, 115768, 2021/02, SCI
  • "High-performance polyvinylpyrrolidone capped copper coatings via ultrasonic-assisted supercritical-CO2 electrodeposition: Electrochemical evaluation", Surface & Coatings Technology, 409, 1, 126926, 2021/01, SCI
  • "Double-feedback control with stepless variable speed driving technology by sensing refrigerant pressure and indoor temperature applied to air conditioning system", Energy and Buildings, 32, 2, 152-159, 2020/05, SCI
  • "Fast Fourier Transform Combined with Phase Leading Compensator for Respiratory Motion Compensation System", Quantitative Imaging in Medicine and Surgery, 28, 2, 18-25, 2020/04, SCI
  • "Simulating the Approximate Irregular Field Dose Distribution in Radiotherapy Using an Ultrasound Tracking Technique", Physica Medica-European Journal of Medical Physics, 32, 2, 15-21, 2020/03, SCI
  • "Low-frequency dual-frequency ultrasound-mediated microbubble cavitation for transdermal minoxidil delivery and hair growth enhancement", Scientific Reports, 10, 1, 4338, 2020/03, SCI
  • "Ultrasound-induced microbubble cavitation via a transcanal or transcranial approach facilitates inner ear drug delivery", JCI Insight, 5, 3, e132880, 2020/02, SCI
  • "Study on the changes of ultrasonic parameters over supercritical Ni-Co electroplating process", Ultrasonics Sonochemistry, 60, 104805, 2020/01, SCI
  • "Tumor motion tracking based on a 4DCT respiratory motion model driven by an ultrasound tracking technique", Quantitative Imaging in Medicine and Surgery, 32, 1, 18-25, 2019/11, SCI
  • "Study on the changes of ultrasonic parameters over supercritical Ni-Co electroplating process", Ultrasonics Sonochemistry, 60, 1, 104805, 2019/10, SCI
  • "Parametric characterization of copper metal coatings produced by supercritical argon electroplating", Journal of The Minerals, Metals & Materials Society (JOM), 28, 2, 15-21, 2019/09, SCI
  • "The characteristics of nickel film produced by supercritical carbon dioxide electroplating with ultrasonic agitation", Ultrasonics Sonochemistry, 175, 2, 65-73, 2019/05, SCI
  • "Adaptive Control of Phase Leading Compensator Parameters Applied to Respiratory Motion Compensation System", Journal of X-Ray Science and Technology, 185, 2, 108-117, 2019/05, SCI
  • "Fabrication of Cu coatings by ultrasound-assisted supercritical argon electroplating", Materials Letters, 35, 2, 67-70, 2019/04, SCI
  • "The efficiency improvement of AC induction motor with constant frequency technology", Energy, 174, 1, 805-813, 2019/03, SCI
  • "Fabrication of high aspect ratio NiP nanowires from blind-hole AAO templates by sc-CO2 electroless plating", Materials Letters, 236, 1, 657-660, 2019/02, SCI
  • "Study on a chiller of air conditioning system by sensing refrigerant pressure feedback control with stepless variable speed driving technology", Building and Environment, 12, 3, 655, 2019/02, SCI
  • "Fabrication of high aspect ratio NiP nanowires from blind-hole AAO templates by sc-CO2 electroless plating", Materials Letters, 12, 3, 655, 2018/11, SCI
  • "Feasibility of two-dimensional radiation dose distribution simulation through ultrasound tracking of respiratory motion", Journal of Medical and Biological Engineering, 25, 2, 15-22, 2018/07, SCI
  • "Experimental verification of a two-dimensional respiratory motion compensation system with ultrasound tracking technique in radiation therapy", Physica Medica-European Journal of Medical Physics, 49, 1, 11-18, 2018/06, SCI
  • "Study on a fan coil unit and chiller by an intelligent control method with a stepless variable speed driving technology", Building and Environment, 32, 21, 115, 2018/02, SCI
  • "Application of Ultrasound Image Tracking Algorithm for Real-time Diaphragmatic Excursion Measurement", Journal of Medical and Biological Engineering, 33, 2, -58, 2017/12, SCI
  • "Energy saving technique for natural stone cutting machine by constant speed control in stone industry", Journal of the Chinese Institute Engineers, 32, 2, 45-49, 2017/12, SCI
  • "Feasibility study on sc-Ar electroplating for metal coatings fabrication", Surface Engineering, 32, 22, 19-28, 2017/11, SCI
  • "The effects of Ultrasonic Agitation on Supercritical CO2 Copper Electroplating", Ultrasonics Sonochemistry, 32, 2, 37-43, 2017/09, SCI
  • "Development of an in vitro diaphragm motion reproduction system", Physica Medica-European Journal of Medical Physics, 30, 2, 11-20, 2017/09, SCI
  • "Dynamic modulation of voltage excitation angle to optimize energy consumption of refrigerator", International Journal of Refrigeration, 32, 23, 2235, 2017/07, SCI
  • "Tracking and compensation of respiration pattern by an automatic compensation system", Medical Physics, 32, 2, 25045, 2017/06, SCI
  • "The Effect of Surfactant Content over Cu-Ni Coatings Electroplated by the sc-CO2 Technique", Materials, 10, 4, 428, 2017/04, SCI
  • "Reliable one-dimensional model applied to an insulated rectangular duct considering thermal radiation", Heat Transfer Research, 48, 1, 49-67, 2017/01, SCI
  • "Fabrication of Though-Silicon Via Arrays by Photo-Assisted Electrochemical Etching and Supercritical Electroplating", Journal of Micro/Nanolithography, MEMS, and MOEMS, 16, 1, 014501, 2017/01, SCI
  • "Study on the effects of pressure and material characterization in thin film and TSV fabricated by supercritical carbon dioxide electrolyte", Materials Science in Semiconductor Processing, 56, 5-13, 2016/12, SCI
  • "An autotuning respiration compensation system based on ultrasound image tracking", Journal of X-Ray Science and Technology, 24, 6, 875-892, 2016/09, SCI
  • "Fabrication of high aspect ratio copper nanowires using supercritical CO2 fluids electroplating technique in AAO template", Materials Science in Semiconductor Processing, 45, 17-26, 2016/04, SCI
  • "Combining Ultrasound and Lactobacilli Treatment for High-Fat-Diet-Induced Obesity in Mice", Journal of Animal Physiology and Animal Nutrition, DOI: 10.1111, 11, 12499, 2016/03, SCI
  • "The feasibility of the auto tuning respiratory 1 compensation system with ultrasonic image 2 tracking technique", Journal of X-Ray Science and Technology, 23, 4, 503-516, 2015/07, SCI
  • "The Development of a Blood Leakage Monitoring System for the Applications in Hemodialysis Therapy", IEEE Sensors Journal, 15, 3, 1515-1522, 2015/03, SCI
  • "Verification and compensation of respiratory motion using an ultrasound imaging", Medical Physics, 42, 3, 1193-1199, 2015/03, SCI
  • "An investigation of supercritical-CO2 copper electroplating parameters for application in TSV chips", Journal of Micromechanics and Microengineering, 25, 1, 015004, 2015/01, SCI
  • "Laser Scribing on Silver Flexible Substrate with Beam Shaping Technology", Journal of Laser Micro/Nanoengineering, 9, 3, 198-203, 2014/11, SCI
  • "The development of a portable ultrahigh vacuum chamber via silicon block", Review of Scientific Instruments, 85, 053107, 2014/06, SCI
  • "The Design, Fabrication and Characterization of a Transparent Atom Chip", Sensors, 14, 10292-10305, 2014/06, SCI
  • "The fabrication of a double-layer atom chip with through silicon vias for an ultra-high-vacuum cell", Journal of Micromechanics and Microengineering, 24, 0450123, 2014/05, SCI
  • "A respiratory compensating system: design and performance evaluation", Journal of Applied Clinical Medical Physics, 15, 3, 307-322, 2014/05, SCI
  • "Parametric optimization of Nd–YVO4 laser for straight scribing on silver nanowire based conductive thin films by Taguchi method", Optics and Laser Technology, 57, 149-153, 2014/04, SCI
  • "Fabrication of through-silicon vias by supercritical CO2 emulsion-enabled nickel electroplating", Materials Science in Semiconductor Processing, 23, 27-33, 2014/02, SCI
  • "Measurements of lifetime and attenuation properties of ultrasound/magnetic resonance multimodality molecular probe", Journal of Medical and Biological Engineering, 33, 3, 285-292, 2013/12, SCI
  • "The development of an atom chip with through silicon vias for an ultra-high-vacuum cell", Journal of Micromechanics and Microengineering, 23, 8, 085004, 2013/08, SCI
  • "An External Cavity Diode Laser Using a Volume Holographic Grating", Optics and Laser Technology, 44, 7, 2182-2185, 2012/05, SCI
  • "A Compensating System of Respiratory Motion for Tumor Tracking: Design and Verification", Journal of X-Ray Science and Technology, 20, 2, 161~174, 2012/05, SCI
  • "Design, microfabrication and characterization of the planarized multilayer atom chips with enhanced heat dissipation", Journal of Micromechanics and Microengineering, 21, 12, 125009, 2011/11, SCI
  • "A compact extended cavity laser using a micromachined silicon flexure for atomic spectroscopy", Sensors and Actuators A: Physical, 169, 1, 227-233, 2011/09, SCI
  • "Motion Artifacts in CT Scans: A Study by Computer Simulation and Mechanical Phantom", Journal of the Chinese Society of Mechanical Engineers, 32, 2, 147~154, 2011/04, SCI
  • "Multi-layer atom chips for atom tunneling experiments near the chip surface", Sensors and Actuators A: Physical, 165, 1, 101-106, 2011/02, SCI
  • "A tunable external cavity diode laser using a micromachined silicon flexure and a volume holographic reflection grating for applications in atomic optics", Journal of Micro/Nanolithography, MEMS, and MOEMS, 7, 2, 021010, 2008/04, SCI
  • "Fabrication of through-wafer interconnects in silicon substrates for ultra-high-vacuum atom-optics cells", Journal of Micromechanics and Microengineering, 18, 4, 045003, 2008/04, SCI
  • "An Investigation of Lapping Characteristics for Improving the Form Error of an Aspheric Lens", Journal of Materials Processing Technology, 176, 183-190, 2006/06, SCI
  • "A Study on the Form Error Compensation for Aspheric Lens Machining", Key Engineering Materials, 238, 2, 369-374, 2003/03, SCI

Conference papers

  • "錳鐵氧化物嵌入聚苯胺奈米的複合材料適用於光催化劑和超電容器", 中華民國力學學會年會暨第四十七屆全國力學會議, 虎尾, 2023/11/17
  • "RECONSTRUCTION AND COMPUTER-AIDED DIAGNOSIS OF DUCHENNE MUSCULAR DYSTROPHY FROM ULTRASOUND IMAGES USING CLUSTERING ALGORITHM, MACHINE LEARNING, AND DEEP LEARNING", Biomaterials International 2023, 札幌, 2023/07/30
  • "Preparation of N-doped γ-Al2O3 embedded with activated carbon for use as a hybrid electrode material in an energy storage device", 2023年國際智慧感測研討會(ICSS 2023), 台南, 2023/06/19
  • "Using ultrasonic-aided supercritical-CO2 electrodeposition to optimize Ni/Al2O3 coating", 2023年國際智慧感測研討會(ICSS 2023), 台南, 2023/06/19
  • "Al2O3 recovery from discarded hazardous aluminum scrap as reinforcing particles for high performance Ni/Al2O3 coatings", 2023年國際智慧感測研討會(ICSS 2023), 台南, 2023/06/19
  • "Improving material morphology using supercritical CO2", 2023年國際智慧感測研討會(ICSS 2023), 台南, 2023/06/19
  • "Activated carbon obtained from Sansevieria trifasciata biomass through a supercritical-CO2 method.: utilization for energy storage", 2023年國際智慧感測研討會(ICSS 2023), 台南, 2023/06/19
  • "Ultrasound image tracking using deep learning mask R-CNN in radiotherapy", 23rd International Conference & Exhibition - The European Society for Precision Engineering and Nanotechnology, 哥本哈根, 2023/06/11
  • "Ni-Co metal coatings by supercritical electroplating process with ultrasonic agitation", 2023 7th International Conference on Material Engineering and Manufacturing (ICMEM 2023), 千葉, 2023/04/07
  • "Tracking-by-detection based compensation system for diaphragm motion", 5th GCBME Global Conference on Biomedical Engineering, Taipei, 2022/12/15
  • "筆記型電腦包覆式樞軸扭力分析", 2022明新科技大學工程科技技術應用研討會, 新竹, 2022/12/02
  • "以三相交流電控制技術應用於冰水主機之壓縮機效率提升", 2022明新科技大學工程科技技術應用研討會, 新竹, 2022/12/02
  • "應用CAE技術於筆記型電腦樞軸設計", 2022明新科技大學工程科技技術應用研討會, 新竹, 2022/12/02
  • "機械式電壓控制與數位式相位控制應用於三相感應電動機之比較", 中國機械工程學會第三十九屆全國學術研討會, 苗栗, 2022/12/02
  • "蕭特基二極體元件之金屬電極電鍍製程開發", 2022年中華民國力學學會第四十六屆全國力學會議, 高雄, 2022/11/18
  • "CO2 supercritical electroplating process with malic acid as buffer", 2022 International Sensors on Smart Sensors, 台中, 2022/10/22
  • "Robust fabrication of silver pyro-vanadates via sonochemical approach for advanced energy storage application", 2022 International Conference on Smart Sensors, 台中, 2022/10/22
  • "Graphene oxide applicated to nickel coating", 2022 International Conference on Smart Sensors, 台中, 2022/10/22
  • "三相交流電動機變動負載之相位智能同步對應控制", CSME-2021中國機械工程學會第38屆全國學術研討會, 台南, 2021/12/03
  • "A study on the wavelet transform technology combined with a respiratory motion compensation system for application in radiation therapy", 2021年生物醫學工程科技研討會(TSBME 2021), 台中, 2021/11/19
  • "超音波攪拌結合超臨界二氧化碳電鍍製程 對氧化石墨烯鍍層的腐蝕性質探討", 2021年中華民國力學學會年會暨第四十五屆全國力學會議, Taipei, 2021/11/18
  • "Copper film deposited by the ultrasonic agitation aided supercritical carbon dioxide electroplating process", ICSS 2021暨第26屆台灣化學感測器科技研討會/第24屆微奈米系統工程研討會, Taipei, 2021/10/14
  • "Nickel film deposited by the ultrasonic agitation aided supercritical carbon dioxide electroplating process", ICSS 2021暨第26屆台灣化學感測器科技研討會/第24屆微奈米系統工程研討會, Taipei, 2021/10/14
  • "High-performance polyvinylpyrrolidone capped copper coatings performed by Supercritical- CO2 electrodeposition", ICSS 2021暨第26屆台灣化學感測器科技研討會/第24屆微奈米系統工程研討會, Taipei, 2021/10/14
  • "以交流阻抗分析比較硼酸與蘋果酸在超臨界電鍍鎳之結果", 中華民國力學學會年會暨第四十四屆全國力學會議, 宜蘭, 2020/11/26
  • "筆記型電腦單手開闔力學分析", CSME-2020中國機械工程學會第37屆全國學術研討會, 虎尾, 2020/11/20
  • "Copper film deposited by the ultrasonic agitation aided supercritical carbon dioxide electroplating process", ICSS 2020 International Conference on Smart Sensors 暨第25屆台灣化學感測器科技研討會/第23屆微奈米系統工程研討會, 高雄, 2020/10/19
  • "Using Fast Fourier Transform in Phase Leading Compensator for Respiratory Motion Compensation System", The 4th International Conference on Power, Energy and Mechanical Engineering (ICPEME 2020), 布達佩斯, 2020/02/14
  • "Ultrasound imaging tracking technique for tumor motion tracking based on a 4DCT respiratory motion model", The 2019 IEEE International Ultrasonics Symposium, Glasglow, 2019/10/06
  • "HIGH ASPECT RATIO VIA FILLING BY ELECTROLESS DEPOSITION ENABLED BY SUPERCRITICAL CARBON DIOXIDE", The 20th International Conference on Solid State Sensors, Actuators and Microsystems, Transducers 2019, 柏林, 2019/06/23
  • "Study on different electroplating process of Ni-Co alloy", 2019年國際智慧感測器研討會(ICSS), 新竹, 2019/06/03
  • "The efficiency improvement of AC induction motor with constant frequency technology", 10th International Conference on Power Electronics – ECCE Asia (ICPE 2019-ECCE Asia), 釜山, 2019/05/27
  • "Characteristics of nickel thin film electroplated by supercritical CO2 emulsion assisted with ultrasonic agitation", 2019 International Conference on Electronics Packaging (ICEP 2019), 新瀉, 2019/04/17
  • "Compensation of Respiration Baseline Shift by an Automatic Compensating system", 2019 5th International Conference on Mechatronics and Robotics Engineering, Roma, 2019/02/16
  • "Study on the feasibility of two-dimensional radiation dose distribution simulated program applied to dose distribution evaluation during tumor treatment", 2018全球生物醫學工程研討會(GCBME)暨科技部醫工學門成果發表會, 中壢市, 2018/11/30
  • "冷媒壓力回授與溫度回授變頻控制技術比較與分析", CSME-2018中國機械工程學會第35屆全國學術研討會, 民雄市, 2018/11/30
  • "筆記型電腦樞軸的C型彈片分析", 2018中華民國力學學會年會暨第42屆全國力學會議, 台北市, 2018/11/23
  • "Compensation of respiration baseline shift by an automatic compensating system", 2018 World Congress on Medical Physics and Biomedical Engineering (IUPESM 2018), 布拉格, 2018/06/03
  • "電鍍鎳銅合金薄膜溫度特性影響之研究", 2018國際智慧感測器研討會暨 第23屆台灣化學感測器科技研討會, 台北, 2018/06/01
  • "Material characterization in TSV fabricated by supercritical carbon dioxide electroplating", 2018 International Conference on Electronics Packaging (ICEP 2018), 名古屋, 2018/04/17
  • "Through-Silicon Via Arrays Manufactured by Photo Assisted Electrochemical Etching and Super-Critical Electroplating Process for Solid Oxide Fuel Cell Application", 19TH INTERNATIONAL SYMPOSIUM ON ECO-MATERIALS PROCESSING AND DESIGN (ISEPD 2018), Jaipur, 2018/02/21
  • "三段AC馬達與無段變速BLDC用於送風機之比較與分析", 106年度中國機械工程學會年會暨第34屆全國學術研討會, 台中, 2017/12/01
  • "溫度對於電鍍鎳銅合金薄膜特性影響之研究", 中華民國力學學會年會暨第40屆全國力學會議, 台南, 2017/11/25
  • "筆記型電腦內部樞軸盤型彈簧常數之研究", 2017 台灣精密工程科技研討會, 虎尾, 2017/11/24
  • "單一細胞層級顯微鏡自動對焦系統設計", 2017 生物醫學工程科技研討會, 中壢, 2017/11/17
  • "Through-silicon via arrays manufactured by photo assisted electrochemical etching and copper electroplating under SC-CO2 environment", The 19th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2017), Kaohsiung, 2017/06/18
  • "雙軸向呼吸運動補償系統之開發與可行性評估", 2017國際智慧醫療診斷器材研討會暨 第二十二屆化學感測器科技研討會, 台南, 2017/05/20
  • "Material Characterization in Thin Film and TSV Fabricated by Supercritical CO2 Fluids Electroplating Technique", 2017 IEEE International Conference on Applied System Innovation (ICASI 2017), 札幌, 2017/05/13
  • "LASER-Assisted Diaphragm Motion Tracking System: A Feasibility Study", 第二十二屆台灣癌症聯合學術年會, 臺北, 2017/05/06
  • "Fabrication of high aspect ratio copper nanowires using super-critical electrodeposition technique for solid oxide fuel cell application", 18th International Symposium on Eco-materials Processing and Design (ISEPD2017), 那霸, 2017/02/17
  • "冷藏節能裝置之研究比較及分析", 105年中國機械工程學會年會暨第33屆全國學術研討會, 新竹, 2016/12/03
  • "表面活性劑對無電鍍鎳之表面特性研究", 中華民國力學學會年會暨第40屆全國力學會議, 新竹, 2016/11/25
  • "以恆速控制技術應用於機具提升節能效率", 第11屆海峽兩岸計量學術研討會, 中壢, 2016/11/01
  • "Management of respiration-induced motion with an ultrasound image tracking technique", 2016 IEEE International Ultrasonics Symposium, 土爾, 2016/09/18
  • "Development of an Intelligent Energy-Saving Control Box on Refrigerator", 2016 3rd Int. Conf. on Power and Energy Systems Engineering, 北九州, 2016/09/08
  • "利用光輔助電化學蝕刻及超臨界電鍍技術製作矽穿孔陣列", 第二十屆奈米工程暨微系統科技研討會, 新竹, 2016/08/25
  • "探討壓力與材料特性對於超臨界二氧化碳流體沉積薄膜與矽穿孔結構的影響", 第二十屆奈米工程暨微系統科技研討會, 新竹, 2016/08/25
  • "Respiratory compensation for baseline shift with ultrasound image-tracking technique", The 2nd Global Conference on Biomedical Engineering, 臺北市, 2016/08/17
  • "Study on the development and feasibility of an in vitro red laser positioning system", The 2nd Global Conference on Biomedical Engineering, 台北市, 2016/08/17
  • "金屬薄膜蒸鍍品質改善研究", 2016 精密機械與製造科技研討會, 墾丁, 2016/05/20
  • "應用超音波技術於銅鎳合金電鍍製程之影響探討", 中華民國力學學會年會暨第39屆全國力學會議, 台北, 2015/11/20
  • "A study on the development and stability of intelligent energy-saving control module", 2015 International Conference on Fuzzy Theory and Its Applications, 礁溪 宜蘭, 2015/11/18
  • "即時體外紅光雷射橫膈膜定位裝置", 2015 生物醫學工程科技研討會, 臺北, 2015/11/13
  • "超音波影像追蹤人體呼吸訊號技術用於自動呼吸位移補償系統", 2015 生物醫學工程科技研討會, 臺北, 2015/11/13
  • "Efficacy of Ultrasound Mediated Microbubbles in Diclofenac Gel to Enhance Transdermal Permeation in Rheumatoid Arthritis Induced Rat", 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 米蘭, 2015/08/25
  • "應用焦磷酸銅於超臨界二氧化碳電鍍製程中鍍層應力降低之研究", 第十九屆奈米工程暨微系統技術研討會, 臺北, 2015/08/13
  • "SUPERCRITICAL CO2-ENABLED FLUIDS ELECTROPLATING TECHNIQUE FOR FABRICATION OF COPPER NANO WIRES", 5th International conference on Optofluidics 2015, 臺北, 2015/07/26
  • "FABRICATION OF THROUGH-SILICON-VIA (TSV) BY COPPER ELECTROPLATED IN AN ELECTROLYTE MIXED WITH SUPERCRITICAL CARBON DIOXIDE", 18th International Conference on Solid-State Sensors, Actuators and Microsystems Transducers 2015, 安克拉治 阿拉斯加, 2015/06/21
  • "多軸機械手臂之外骨骼教導裝置之同步控制設計", 2015 臺灣智慧型機器人研討會, 臺北, 2015/05/29
  • "人工肌肉致動的下肢健機器人之機構設計", 2015 臺灣智慧型機器人研討會, 臺北, 2015/05/29
  • "利用超臨界電鍍技術應用於超高深寬比之陽極氧化鋁模板製作銅奈米線", 2015 第十三屆微電子技術發展與應用研討會, 高雄, 2015/05/22
  • "光輔助電化學蝕刻製造高深寬比陣列式結構應用於超臨界電鍍銅製程", 2015 第十三屆微電子技術發展與應用研討會, 高雄, 2015/05/22
  • "以矽控整流控制技術應用於汙(廢)水處理廠設備之節能效率提升", 2015年中國城鎮污泥處理處置技術與應用高級研討會, 江蘇宜興, 2015/04/23
  • "A safety assessment of treating the tumors bearing mice by hyperthermia via radio frequency field", 第九屆亞太生物醫學工程會議(APCMBE 2014), 台南, 2014/10/09
  • "The verification of improving the compensation accuracy of respiratory motion using simultaneously monitoring device", 第九屆亞太生物醫學工程會議 APCMBE 2014, 台南, 2014/10/09
  • "Assessment of Whole Body Fat Composition in Mice using 3D Local Fat Pad Ultrasound Imaging", The World Molecular Imaging Congress (WMIC 2014), 首爾, 2014/09/17
  • "Discussion of electroplating parameters and analysis of through-silicon vias by Cu supercritical-CO2 technique", 第18屆奈米工程暨微系統技術研討會, 台南, 2014/08/21
  • "Fabrication of Through-Silicon Vias (TSV) by Nickel Electroplating in Supercritical CO2", IEEE NEMS 2014, 夏威夷, 2014/04/13
  • "The Efficiency of Transdermal α-Arbutin Delivery after Albumin Microbubbles Treatment with Ultrasound in Mice", IEEE NEMS 2014, 夏威夷, 2014/04/13
  • "一體成型之外腔雷射與微機電技術應用於雷射系統之探討", 2013 全國精密製造研討會, 臺北, 2013/11/22
  • "光纖布拉格光柵於外腔雷射系統穩定度之探討", 2013 全國精密工程研討會, 臺北, 2013/11/22
  • "板橋三鐵共構車站服務品質與顧客滿意度之研究", 2013 兩岸經貿發展學術研討會, 新竹, 2013/11/21
  • "血液透析中動靜脈廔管漏血監測系統之開發應用", 2013 生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 新竹, 2013/11/15
  • "7.12MHz下奈米金作為局部加熱腫瘤機制的可行性評估", 2013 生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 新竹, 2013/11/15
  • "以超臨界電鍍鎳應用於3D IC矽穿孔充填技術", 第十七屆奈米工程暨微系統技術研討會, 台中, 2013/08/22
  • "透明原子晶片及其散熱裝置設計及製作", 中國機械工程學會 第29屆全國學術研討會, 高雄, 2012/12/07
  • "呼吸位移補償系統劑量分佈的驗證", 2012中華民國生物醫學工程科技研討會, 中壢, 2012/11/17
  • "光纖布拉格光柵外腔半導體雷射系統及其原子物理領域的應用", 2012第全國精密製造研討會暨國際製造工程學會, 台中, 2012/11/09
  • "全像體積光柵之外腔雷射穩定度探討", 2012第全國精密製造研討會暨國際製造工程學會, 台中, 2012/11/09
  • "Fabrication of Through-Silicon-via (TSV) for Ultra-High Vacuum Atom-Optics Cell", IEEE sensors 2012, Taipei, 2012/10/28
  • "The application of ultrasound enhanced local drug delivery with albumin microbubbles in the inner ear system", 2012 IEEE International Ultrasonics Symposium (IUS 2012), Dresden, 2012/10/07
  • "單層原子晶片之表面反射率提高及電性研究", 第15屆奈米工程暨微系統技術研討會, 臺北, 2011/09/06
  • "電容平板式微陀螺儀之彈簧有限元素分析與理論驗證", 第15屆奈米工程暨微系統技術研討會, 臺北, 2011/09/06
  • "A Tunable External Cavity Laser Using a Micromachined Silicon Flexure for Atomic Spectroscopy", 7th International Symposium on Precision Engineering Measurements and Instrumentation ( ISPEMI 2011 ), 雲南 麗江, 2011/08/07
  • "Fabrication and Process Characterization of Multi-layer Atom Chips", 中華民國物理年會暨研究成果發表會, 台北, 2011/01/25
  • "Using the Binder PolymethylMethacrylate in Ceramic Slurry for Paving the Rapid Prototyping Green Block", 中國機械工程學會 第27屆全國學術研討會, 台北, 2010/12/10
  • "Development of an External Cavity Diode Laser System for Applications in Atomic Physics", 中國機械工程學會 第27屆全國學術研討會, 台北, 2010/12/10
  • "Fabrication of Single Layer Atom Trapping Chips for Atomic Optics", 中國機械工程學會 第27屆全國學術研討會, 台北, 2010/12/10
  • "因呼吸運動導致頭腳向器官位移的重現", 2010 National Symposium on System Science and Engineering, 台北, 2010/07/01
  • "Robust Tunable External Cavity Diode laser Using a Volume Holographic Grating for Rubidium Atom Cooling", 2010 International Conference on Optics, Photonics and Energy Engineering (OPEE 2010), Wuhan, 2010/05/10
  • "The fabrication of atom chips using copper electroplating technolog", 中華民國物理年會暨研究成果發表會, 台南市, 2010/02/02
  • "A Compact Tunable External Cavity Diode Laser with Littrow Configuration for Atomic Physics", 中國機械工程學會 第26屆全國學術研討會, 台南市, 2009/11/20
  • "A Study on the Accuracy of Micro Components Fabricated by Ceramic Laser Sintering", 第十三屆奈米工程暨微系統技術研討會, 新竹市, 2009/07/09
  • "Fabrication and Process Characterization of Atom Transistor Chips", 15th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS’ 09), Denver, 2009/06/21
  • "Fabrication of Atom Trapping Chips with Feedthrough Interconnects For Applications in Atom Optics", A Solid State Sensors, Actuators and Microsystems Workshop (Hilton Head 2008), Hilton Head Island, 2008/06/01
  • "Towards Experimental Realization of an Atom Transistor", 39th Annual Meeting of the Division of Atomic, Molecular, and Optical Physics (DAMOP-2008), Penn State University, Pennsyl, 2008/05/27
  • "A Micromachined Silicon Flexure for Tunable External Cavity Diode Laser", 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE 2007), Seattle, 2007/11/11
  • "Fabrication of Feedthrough Atom Trapping Chips for Atomic Optics", 14th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 2007), Lyon, 2007/06/10
  • "A Study of the Processing Technology for Optic Aspheric Lens", CSME 19th, Proceedings of the 19th National Conference of the Chinese Society on Mechanical Engineering,, 虎尾, 2002/11/29
  • "A Study of the Form Error Compensation for Aspherical Lens Machining", ISAAT 2002, The 5th International Symposium on Advances in Abrasive Technology, 香港, 2002/11/15
Go Top