按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

Ming-Wei Wu

TITLE：
Professor／Graduate Institute of Materials Science and Engineering
REACH OUT：
RESEARCH WEBSITE：

Journal articles

  • "積層製造方向對黏結劑噴塗316L不鋼機械性質之影響", 粉體及粉末冶金會刊, 48, 4, 285–292, 2023/11, ELSE1
  • "The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel", Materials Science and Engineering A, 887, 145744, 2023/11, SCI
  • "積層製造316L不鋼之製程對顯微組織與機械性質的影響", 粉體及粉末冶金會刊, 48, 3, 177-192, 2023/08, ELSE1
  • "Novel laser powder bed fusion Corrax maraging stainless steel lattice with superior specific strength and energy absorption", Journal of Materials Research and Technology, 25, 5240–5248, 2023/07, SCI
  • "Revealing the intensified preferred orientation and factors dominating the anisotropic mechanical properties of laser powder bed fusion Ti6Al4V alloy after heat treatment", Journal of Alloys and Compounds, 949, 169494, 2023/07, SCI
  • "Mechanical behavior of CuZrAl metallic glass scaffolds fabricated by selective laser melting", Materials Letters, 341, 134242, 2023/06, SCI
  • "The effects of microstructures on the mechanical performances and fracture mechanisms of boron-alloyed ferritic and martensitic stainless steels fabricated by powder metallurgy", Materials Science and Engineering A, 866, 144680, 2023/02, SCI
  • "Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion", Virtual and Physical Prototyping, 18, 1, e2155197, 2023/01, SCI
  • "使用數位影像相關法鑑定積層製造多孔鈦合金之單軸壓縮機械性質及破壞機制", 粉體及粉末冶金會刊, 47, 4, 333-345, 2022/11, ELSE1
  • "Identification on prior β grain of additive manufactured Ti-6Al-4V alloy using electron backscatter diffraction", Materials Letters, 324, 132758, 2022/10, SCI
  • "Improved corrosion resistances of powder metallurgy austenitic, ferritic, and martensitic stainless steels by liquid phase sintering", Materials, 15, 5483, 2022/08, SCI
  • "A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion", Journal of Alloys and Compounds, 910, 164802, 2022/07, SCI
  • "Mechanical performances of AlN/Al metallized ceramic substrates fabricated by transient liquid phase bonding and pre-oxidation treatment", Ceramics International, 48, 16619–16629, 2022/06, SCI
  • "Uniaxial compression properties and compression fatigue performance of selective laser melted Ti-6Al-4V cellular structure", Metals and Materials International, 28, 132–144, 2022/01, SCI
  • "Sintering, microstructure, and mechanical properties of vitrified bond diamond composite", Ceramics International, 47, 33259–33268, 2021/12, SCI
  • "The microstructure of Fe-based laminated metal composite produced by powder metallurgy", Materials, 14, 6533, 2021/11, SCI
  • "Wear behavior of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy manufactured by selective laser melting", Materials, 14, 7048, 2021/11, SCI
  • "Compression deformation and fracture behaviors of laser powder bed fusion Ti-6Al-4V cellular solid during in situ tests", Materials Letters, 303, 130462, 2021/11, SCI
  • "Promoting the sintering densification and mechanical properties of gas-atomized high-entropy alloy powder by adding boron", Materials Characterization, 179, 111370, 2021/09, SCI
  • "使用粉末冶金技術製作合金鋼/不鋼之層狀金屬複合材料及其性質分析", 粉體及粉末冶金會刊, 46, 2, 98-105, 2021/05, ELSE1
  • "Mechanical properties and fracture mechanism of boron-containing 304L austenitic stainless steel densified by liquid phase sintering", Materials Science and Engineering A, 814, 141182, 2021/05, SCI
  • "Intensification of preferred orientation in the additive manufactured Ti-6Al-4V alloy after heat treatment", Materials Letters, 286, 129198, 2021/03, SCI
  • "Compression property, deformation behavior, and fracture mechanism of additive-manufactured Ti-6Al-4V cellular solid with a new cuboctahedron structure", Metallurgical and Materials Transactions A, 51, 6517–6527, 2020/12, SCI
  • "Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities", Materials Science and Engineering A, 790, 139695, 2020/07, SCI
  • "Continuous compression behaviors of selective laser melting Ti-6Al-4V alloy with cuboctahedron cellular structures", Materials Science and Engineering C, 100, 781-788, 2019/07, SCI
  • "積層製造Ti-6Al-4V多孔材料的壓縮破壞行為", 粉體及粉末冶金會刊, 43, 3, 194-199, 2018/08, ELSE1
  • "含硼304L不�袗�之液相燒結及腐蝕行為", 粉體及粉末冶金會刊, 43, 2, 76-83, 2018/05, ELSE1
  • "積層製造Ti-6Al-4V合金之拉伸及疲勞性質", 粉體及粉末冶金會刊, 43, 1, 23-29, 2018/02, ELSE1
  • "Improved Fatigue Endurance Ratio of Additive Manufactured Ti-6Al-4V Lattice by Hot Isostatic Pressing", Materials and Design, 134, 163-170, 2017/11, SCI
  • "Liquid phase sintering mechanism and densification behavior of boron-alloyed Fe-Ni-Mo-C-B powder metallurgy steel", Materials and Design,, 133, 536-548, 2017/11, SCI
  • "Anisotropic Compression Properties of Selective Laser Melted Ti-6Al-4V", Key Engineering Materials, 719, 87-91, 2017/01, EI
  • "熱處理溫度對選擇性雷射熔融Ti-6Al-4V合金之橫向破裂強度及衝擊韌性的影響", 粉體及粉末冶金會刊, 41, 3, 224-231, 2016/08, ELSE1
  • "Investigation of the Characteristics of Submicron-Structured Powder-Fabricated Cr50Ni50 Alloys via Different Hot-Press Sintering Pressures", Materials Transactions, 57, 732-737, 2016/05, SCI
  • "Phase Identification in Boron-Containing Powder Metallurgy Steel using EBSD in Combination with EPMA", Materials Characterization, 113, 90-97, 2016/03, SCI
  • "The positive effect of hot isostatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti-6Al-4V alloy", Materials Science and Engineering A, 658, 429-438, 2016/03, SCI
  • "熱處理對選擇性雷射熔融Ti-6Al-4V合金之顯微組織的效應", 粉體及粉末冶金會刊, 41, 1, 58-65, 2016/02, ELSE1
  • "Effects of Particle Size of Pre-Alloy Powders and Vacuum Sintering Temperatures on the Microstructure and Mechanical Properties of 440C Stainless Steel", ISIJ International, 56, 335-340, 2016/02, SCI
  • "Anisotropy in the impact toughness of selective laser melted Ti-6Al-4V alloy", Materials Science and Engineering A, 650, 295-299, 2016/01, SCI
  • "Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steel with Chromium and Carbon", Metallurgical and Materials Transactions A, 46, 11, 5285-5295, 2015/11, SCI
  • "Preparation and Sintering of Indium-Gallium-Zinc Oxide Ceramics with Different Zinc Oxide Contents", Journal of the European Ceramic Society, 35, 14, 3893-3902, 2015/11, SCI
  • "Enhancement of the Densification and Mechanical Properties of Aluminum-Doped Zinc Oxide Ceramics by Hot Isostatic Pressing", Journal of Alloys and Compounds, 650, 514-519, 2015/11, SCI
  • "The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", MATEC Web of Conferences, 27, p02010, 5pp., 2015/10, EI
  • "The Promotion of Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steels by Adding Nickel", MATEC Web of Conferences, 27, p01012, 3pp., 2015/10, EI
  • "Improving the Electrical Properties of Niobium-Doped Titania Sputtering Targets by Sintering in Oxygen-Deficient Atmospheres", Ceramics International, 41, 7, 8856-8860, 2015/08, SCI
  • "The Microstructures, Mechanical Properties, and Fracture Behaviors of Metal-Injection Molded 17-4PH Stainless Steel", Metals and Materials International, 21, 3, 531-537, 2015/05, SCI
  • "The Sintering Trajectory and Electrical Properties of Niobium-Doped Titania Sputtering Targets", Journal of the American Ceramic Society, 98, 1, 163-170, 2015/01, SCI
  • "The Influences of Carbon and Molybdenum on the Progress of Liquid Phase Sintering and the Microstucture of Boron-Containing Powder Metallurgy Steel", Metallurgical and Materials Transactions A, 46, 1, 467-475, 2015/01, SCI
  • "The sintering behavior, microstructure, and electrical properties of gallium-doped zinc oxide ceramic targets", Journal of the European Ceramic Society, 34, 15, 3715-3722, 2014/12, SCI
  • "A Novel Ni-containing Powder Metallurgy Steel with Ultrahigh Impact, Fatigue, and Tensile Properties", Metallurgical and Materials Transactions A, 45, 9, 3866-3875, 2014/08, SCI
  • "The Fabrication and Characterization of Niobium-doped Titania Ceramic", Key Engineering Materials, 605, -, 11-14, 2014/04, EI

Conference papers

  • "Mechanical properties and fracture evolution of Corrax lattice structure produced by laser powder bed fusion", 2023 Materials Research Society-Taiwan International Conference (2023 MRSTIC), 新竹, 2023/11/17
  • "Mechanical Property and Fracture Behavior of Laser Powder Bed Fusion AA8009 Aluminum Alloy Lattice Structure", 2023 Materials Research Society-Taiwan International Conference (2023 MRSTIC), 新竹, 2023/11/17
  • "The effects of shell printing on the 316L stainless steel fabricated by binder jetting", The 10th International Conference on Mining, Material, and Metallurgical Engineering (MMME'23), London, 2023/08/06
  • "直接接合Si3N4基板之界面接合研究", 2023年台灣陶瓷學會年會, 高雄, 2023/05/26
  • "The effects of building direction and heat treatment on the mechanical properties of additive manufactured maraging stainless steel", 2023 7th International Conference on Materials Engineering and Nano Sciences (ICMENS 2023), Chiba, 2023/04/07
  • "Microstructure and mechanical properties of Corrax stainless steel produced by additive manufacturing", 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC), 台北, 2021/11/13
  • "Microstructure of selective laser melted 316L stainless steel", 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC), 台北, 2021/11/13
  • "The effect of bonding process on the bending strength of Al2O3/Al composite substrate", 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC), 台北, 2021/11/13
  • "鋁/氮化鋁陶瓷基板的直接接合特性及抗彎強度研究", 2021年台灣陶瓷學會年會, 台南, 2021/05/21
  • "鑽石/玻璃複合材料之元素分佈及機械性質研究", 2019年材料科學學會年會, 台南, 2019/11/15
  • "層狀410/304L不�瓡�之粉末冶金製程及顯微組織研究", 2019年海峽兩岸粉末冶金技術研討會, 博鰲, 2019/10/16
  • "鑽石-玻璃接合之界面元素分佈研究", 2019年台灣陶瓷學會年會, 花蓮, 2019/05/17
  • "Tensile Strain and Fracture of Ni-Alloyed Powder Metallurgy Steel", The 5th International Conference on Powder Metallurgy in Asia (APMA 2019), Pune, 2019/02/18
  • "熱處理對輥軋Ti/SUS 420/Ti複合板顯微組織之效應", 107年度台灣金屬熱處理學會, 台北, 2018/12/08
  • "Strain Distribution of Powder Metallurgy Steel during Tensile Testing", Annual Conference on Engineering and Applied Science, 大阪, 2018/11/27
  • "Compression Fracture Behavior of Additive Manufactured Ti-6Al-4V Porous Material", 2018 World Congress on Powder Metallurgy (WORLDPM2018), 北京, 2018/09/16
  • "Tensile Property of Boron-Alloyed 304L Stainless Steel", 2018 6th International Conference on Metallurgy Technology and Materials (ICMTM2018), 西安, 2018/05/30
  • "Microstructure and Sintering of Boron-Alloyed Martensitic Stainless Steel", 19th International Conference on Microstructure and Materials Properties (ICMMP 2017), 東京, 2017/11/13
  • "Effects of Porosity on Fatigue Property of Selective Laser Melted Ti-6Al-4V Porous Material", IUMRS International Conference in Asia (IUMRS-ICA) 2017, 台北, 2017/11/05
  • "氧化鋅鋁(AZO) 陶瓷材料之注漿成形及燒結行為特性研究", 106年度中國�Y冶工程學會年會, 苗栗, 2017/10/19
  • "The Microstructure and Texture of Selective Laser Melted Ti-6Al-4V Alloy", International Conference on Mining, Material, and Metallurgical Engineering, 北京, 2017/07/15
  • "The Effect of Heat Treatment on the Impact Toughness of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
  • "Liquid Phase Sintering of Boron-Alloyed Powder Metallurgy Steel with Nickel", 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
  • "Liquid Phase Sintering of Boron-Alloyed Powder Metallurgy Stainless Steel", 19th International Conference on Chemical, Material, Metallurgical Engineering and Mine Engineering, 東京, 2017/03/27
  • "鎳元素對含硼粉末合金鋼之液相燒結與顯微結構的影響", 105年度中國材料科學學會年會, 新竹, 2016/11/19
  • "含硼410L不�瓡�之液相燒結行為及顯微組織研究", 105年度中國材料科學學會年會, 新竹, 2016/11/19
  • "熱處理溫度對選擇性雷射熔融Ti-6Al-4V合金之橫向破裂強度及衝擊韌性的影響", 105年度中華民國粉體及粉末冶金協會專題研討會, 新竹, 2016/08/26
  • "Anisotropic Compression Properties of Selective Laser Melted Ti-6Al-4V", 2016 International Conference on Advanced Materials Research and Manufacturing Technologies (AMRMT 2016), 新加坡, 2016/08/18
  • "Surface roughness of Ti-6Al-4V alloy prepared by selective laser melting", 2016 International Symposium on Material Science and Technology (ISMST 2016), Seoul, 2016/05/12
  • "The Influences of Ni alloying methods on the Sintered Density of Boron-alloyed Powder Metallurgy Steel", 2016 2nd International Conference on Chemical, Metallurgy and Environmental Engineering (CMAEE-16), Kyoto, 2016/04/12
  • "噴霧造粒Fe2O3粉末之氫氣還原行為及粉末特性研究", 104年度中國材料科學學會年會, 高雄, 2015/11/20
  • "積層製造Ti6Al4V合金之衝擊韌性及異向性探討", 104年度中國材料科學學會年會, 高雄, 2015/11/20
  • "鎳含量對含硼粉末合金鋼之液相燒結緻密化的效應", 104年度中國�Y冶工程學會年會, 高雄, 2015/10/23
  • "The Promotion of Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steels by Adding Nickel", 2015 4th International Conference on Engineering and Innovative Materials (ICEIM), Penang, 2015/09/03
  • "The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting", 2015 4th International Conference on Engineering and Innovative Materials (ICEIM), Penang, 2015/09/03
  • "Anisotropic Thermal and Electrical Conductivities of 3D-printed Ti-6Al-4V Alloy", The 13th World Conference on Titanium 2015, San Diego, 2015/08/16
  • "The Mechanical Properties of Metal-Injection Molded 17-4PH Stainless Steels with Different Delta-Ferrite Contents", 2015 Spring International Conference on Material Sciences and Technology (MST-S), 北京, 2015/04/14
  • "燒結氣氛及熱處理對射出成形17-4PH不�瓡�之機械性質的影響", 2014年海峽兩岸粉體及粉末冶金技術研討會, 宜蘭, 2014/08/15
Go Top