按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

JHE-YU LIN

TITLE：
Assistant Professor／Department of Mechanical Engineering
REACH OUT：

Journal articles

  • "Al interlayer enhanced interfacial strength of ultrasonically welded copper-titanium dissimilar joints", Materials Letters, 367, 146582, 2024/07, SCI
  • "Improving interfacial strength at room and elevated temperatures in ultrasonic welding of pure titanium: Interlayer-induced phase transformation and concentrated plastic deformation", Materials Science and Engineering: A, 902, 146629, 2024/06, SCI
  • "Interfacial strength saturation due to local melting at bonding interface in ultrasonic welding of 7075 aluminum alloy to 316L stainless steel", Materials Letters, 362, 1, 136249, 2024/05, SCI
  • "Ag and Cu whisker formation in Ag–Cu–Te alloys", Journal of Materials Science, 1-16, 2024/05, SCI
  • "Grand herringbone architecture securing the high thermoelectric performance of GeTe", Materials Today Physics, 41, 1, 101329, 2024/02, SCI
  • "Impact of Austenite Nanograins Induced by Sliding Friction on Interfacial Strength during Ultrasonic Welding", Science and Technology of Welding and Joining, 29, 1, 3-11, 2024/01, SCI
  • "Improved interfacial strength of Ti/Ti ultrasonic welds by introducing α/β/α heterogeneous bonding interface", Scripta Materialia, 237, 1, 115724, 2023/12, SCI
  • "Factors affecting evolutions of contact area formation and bonding strength in pure Cu/Cu joints produced by ultrasonic spot welding", Science and Technology of Welding and Joining, 28, 8, 718-727, 2023/05, SCI
  • "Deformation induced solute segregation and G.P. zone formation in Mg-Al and Mg-Zn binary alloys", Scripta Materialia, 220, 114924, 2022/11, SCI
  • "Gradient microstructure and interfacial strength of CoCrFeMnNi high-entropy alloy in solid-state ultrasonic welding", Materials Science and Engineering: A, 825, 141885, 2021/09, SCI
  • "Investigation of work hardening behavior in multilayered steels architected by twinning induced plasticity steel and martensitic steel during uniaxial tension", Materials Science and Engineering: A, 811, 140996, 2021/04, SCI

Conference papers

  • "超音波銲接下鎂合金成份變化對銲接 316L 不鏽鋼界面之接合機制影響", 第12屆台灣相圖年會, 新竹市, 2024/01/20
  • "探討超音波銲接 Ni/Al/Ni 多層複合材料之界面微結構對接合強度影響", 第12屆台灣相圖年會, 新竹市, 2024/01/20
  • "使用超音波銲接製造Cu-Cu T型銲點", 中國機械工程學會第四十屆全國學術研討會論文集, 彰化市, 2023/12/01
  • "透過超音波銲接探討Cu-Al複層銲接之可行性", 透過超音波銲接探討Cu-Al複層銲接之可行性, 彰化市, 2023/12/01
  • "Effect of Interfacial Microstructure on Bonding Strength of Ultrasonically-Welded Ni/Al/Ni Lamellar Composites", MRS-T International Conference 2023, Hsinchu City, 2023/11/18
  • "The influence of composition variations on the bonding mechanisms between steels and magnesium alloys by Ultrasonic spot welding", MRS-T International Conference 2023, Hsinchu City, 2023/11/18
  • "Grade2純鈦板搭配不同厚度鎳中間層之超音波銲接的性質探討", 中華民國力學學會第四十七屆全國力學會議 (CTAM 2023), 雲林縣, 2023/11/18
  • "Ultrafine-grained Bonding Interface of 316L Stainless Sheets Processed by Ultrasonic Spot Welding", TMS annual meeting, San Diego, 2023/03/19
  • "Phase Transformation Behavior during Ultrasonic Welding of Pure Ti Sheets with Fe Interlayer", TMS 2023 annual meeting, San Diego, 2023/03/19
  • "316L 不鏽鋼板及 Grade2 純鈦板的超音波焊接可行性探討", CSME 2022機械年會, 苗栗市, 2022/12/02
  • "銅-銅之超音波焊接中粗糙度及下壓力對界面形成之影響", CSME 2022機械年會, 苗栗市, 2022/12/02
  • "鎂合金與316L不鏽鋼之超音波焊接與微觀結構分析", 中國材料科學學會111年年會, 苗栗市, 2022/11/18
  • "超音波焊接異質接合 6061-T6 鋁合金和 316L 不鏽鋼", 中國材料科學學會111年年會, 苗栗市, 2022/11/18
  • "純 Cu/Ti 板材的超音波焊接可行性探討暨焊接界面微結構分析", 中國材料科學學會111年年會, 苗栗市, 2022/11/18
  • "樣品表面粗糙度及焊接參數對超音波焊接之強度影響探討", 第20屆精密機械與製造科技研討會, 屏東縣, 2022/05/20
  • "Solid-state ultrasonic welding of SUS316L sheets", 第10屆臺灣相圖會議, 臺北市, 2022/01/22
  • "相變化提升接合強度-以純鈦及 IF 鋼的超音波焊接為例", 第10屆臺灣相圖會議, 臺北市, 2022/01/22
  • "Interfacial phenomena between CoCrFeMnNi high entropy alloys during ultrasonic welding", MRS-T International Conference, Taipei, 2021/11/13
  • "Investigation of SUS316L joints using solid-state ultrasonic welding", MRS-T International Conference, Taipei, 2021/11/13
Go Top