"Visually activated sprinklers applied in atria to mitigate the interaction of water spray with the smoke layer", Case studies in thermal engineering, 51, 103517, 2023/11, SCI
"Evaporative cooling method to improve energy management of overhead downward flow-type data center", Case studies in thermal engineering, 45, 102998, 2023/05, SCI
"Optimized design on the thermohydraulic performance of the helical coil heat exchanger", International Journal of Thermofluids, 17, 100271, 2023/01, SCI
"Optimized deep learning-based prediction model for chiller performance prediction", Data & Knowledge Engineering, 144, 102120, 2023/01, SCI
"A Numerical Study on the Effects of Purge and Air Curtain Flow Rates on Humidity Invasion Into a Front Opening Unified Pod (FOUP)", IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 35, 4, 670-679, 2022/11, SCI
"Large scale PIV-measurement to evaluate the flow isolation device (FID) efficiency in the stocker room of wafer masks", International Journal of Thermofluids, 16, 100223, 2022/10, SCI
"Energy saving for an air conditioning system applied in a thin-film-transistor liquid-crystal display (TFT LCD) high-tech fabrication plant (Fab)", International Journal of Thermofluids, 16, 100210, 2022/09, SCI
"The effects of surface modification on aerodynamic characteristics of airfoil DU 06 W 200 at low Reynolds numbers", International Journal of Thermofluids, 16, 100208, 2022/09, SCI
"A comparative study of a front opening unified pod (FOUP) moisture removal efficiency with different purging gases", International Journal of Thermofluids, 16, 100198, 2022/08, SCI
"Optimal thermohydraulic design of the indoor unit of a split-type air conditioner", Applied Thermal Engineering, 211, 118502, 2022/07, SCI
"Numerical and experimental investigations on thermal management for data center with cold aisle containment configuration", Applied Energy, 307, 118213, 2022/02, SCI
"Thermohydraulic and Condensing Phase-Change Analysis within the Indoor Unit of a Split-Type Air-Conditioner", Case Studies in Thermal Engineering, 21, 100714, 2020/10, SCI
"The model development and case study for transient thermal response of the human body interacting with the coupled fabric-environment system", Case Studies in Thermal Engineering, 18, 2020/04, SCI
"Impact of an oscillating guide vane on the thermo-hydraulic fields in a square cavity with single inlet and outlet ports", International Journal of Heat and Mass Transfer, 128, 1184-1200, 2019/01, SCI&EI
"The Effect of Viscous Dissipation on Heat Transfer in Cavities with Varing Shape Due to an Inner Rotating Circular Cylinder", Numerical Heat Transfer, Part A: Applications, 68, 150-173, 2015/03, SCI
"Filling-box process during solidification of a liquid hypoeutectic binary solution", International Communications in Heat and Mass Transfer, 53, 56-63, 2014/04, SCI
"Investigation of flow and heat transfer around internal channels of an air ventilation vest", Textile Research Journal, 4, 84, 399-410, 2014/03, SCI
"The Impact of an Air-Supply Guide Vane on the Indoor Air Distribution", World Academy of Science, Engineering and Technology, 77, 365-369, 2013/05, EI
"Suppressing freckles during solidification due to periodic motion of top liquid layer", Applied Thermal Engineering, 50, 1055-1069, 2013/01, SCI
"THE IMPACT OF DIFFERENTIAL WALL TEMPERATURES ON THE TRANSPORT PHENOMENADURING THE SOLIDIFICATION OF A SUPER-EUTECTIC BINARY SOLUTION", Journal of Enhanced Heat Transfer, 2, 19, 179-190, 2012/06, SCI
"The Obstacle Effect to the Mixing Efficiency in X-Shaped Micro Channel", International Journal of Earth Sciences and Engineering, 4, 5, 513, 2012/06, SCI
"Solidification of a Liquid Super-Eutectic Binary Alloy", Experimental Heat Transfer, 4, 24, 335-354, 2011/09, SCI
"Using Air Curtain to Control Pollutant Spreading for Emergency Management in a Cleanroom", Building and Environment, 5, 46, 1104-1114, 2011/05, SCI
"Particle Deposition on a 300 mm Wafer Moving in the Opposite Direction of the Airflow in a Uni-directional Cleanroom", Aerosol and Air Quality Research, 10, 316-322, 2010/06, SCI
"Experimental Performance Investigation of Ventilation Schemes in a Private Bathroom", Building and Environment, 45, 243-251, 2010/01, SCI
"PIV Study on Double-diffusive Convection during the Unidirectional Solidification of a Hypereutectic Binary Solution", Journal of Enhanced Heat Transfer, 4, 16, 387-402, 2009/12, SCI
"Periodic Fluid Flow and Heat Transfer in a Square Cavity Due to an Insulated or Isothermal Rotating Cylinder", ASME, Journal of Heat Transfer, 11, 131, 111701-1~11, 2009/11, SCI
"PIV Study on the Development of Double-diffusive Convection during Solidification Effected by Lateral Cooling for a Super-eutectic Binary Solution", Applied Thermal Engineering, 14, 29, 2773-2782, 2009/10, SCI
"Numerical Study on the Dispersion of Airbone Contaminants from an Isolation Room in the Case of Door Opening", Applied Thermal Engineering, 29, 1544-1551, 2009/06, SCI
"Dynamic Analysis on Particle Concentration Induced by Opening the Door of a Front Opening Unified Pod (FOUP) that Loaded with 25 Pieces of 300 mm Wafer Manufacturing Processes", Aerosol and Air Quality Research, 1, 9, 139-148, 2009/03, SCI
"Numerical Study of Solidification around Staggered Cylinders in a Fixed Space", Numerical Heat Transfer, Part A: Applications, 48, 3, 239-260, 2005/08, SCI
"隔離病房動態氣流模擬分析", 潔淨科技, 33-40, 2005/06, ELSE1
"Heat Transfer Characteristics of Solidification around Staggered Cylinders in a Fixed Volume", Journal of Enhanced Heat Transfer, 12, 2, 203-224, 2005/04, SCI
"Unidirectional Solidification Process of a Binary Solution Saturating Porous Media", Transactions of the Aeronautical and Astronautical Society of the Republic of China, 37, 1, 91-100, 2005/01, EI
"Numerical Study of the Effect of Rotational Speeds on the Similarity Law for the Cross Flow Fan of the Split-Type Air-Conditioner", ASHRAE Transactions, 110, 2, Paper no. 4370, 2004/12, EI
"Numerical Study of Heat Transfer Performance on the Air Side of Evaporator for a Domestic Refrigerator", Numerical Heat Transfer, Part A: Applications, 44, 8, 851-870, 2003/12, SCI
"Numerical Study of Transient Thermal Ablation of High-Temperature Insulation Materials", AIAA, Journal of Thermophysics and Heat Transfer, 17, 1, 53-61, 2003/01, SCI
"Solidified Layer Growth and Decay Characteristics During Freeze Coating of Binary Substance", AIAA, Journal of Thermophysics and Heat Transfer, 16, 3, 379-388, 2002/07, SCI
研討會論文
"Enhancing Data Center Power Efficiency Prediction with an Attention-Based Integrated Deep Neural Network Architecture", 2023 JSRAE Conference, 東京, 2023/09/06
"The Impact of Different Server Arrangements and Different Heat Loads on the Performance of a Data Center", 2023 JSRAE Conference, 東京, 2023/09/06
"Healthy and Energy-saving Design in a University Library", 8th Thermal and Fluids Engineering Conference, Maryland, 2023/03/26
"The Evaluation of the Wind Loads on a Wind Turbine under Different Wind Conditions", 8th Thermal and Fluids Engineering Conference, Maryland, 2023/03/26
"Optimization of Cabinet Configuration in a Data Center", 14th International Conference on Applied Energy, Bochum, 2022/08/08
"The Case Study of Evaporative Cooling in a Data Center", The 10th Asian Conference on Refrigeration and Air-conditioning, Chongqing China 2022, 2022/04/08
"Numerical Study on the Optimal Hydraulic Design for the Indoor unit of a Split-Type Air-conditioner", International Conference on Applied Energy 2021, 曼谷, 2021/11/29
"A study on the feasibility of convective cooling for underground high voltage power transmission cable culverts", International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics HEFAT2021, Amsterdam, 2021/07/26
"The Development of the Optimized Casing Shape with Superior Hydraulic Performance for a Split-Type Air-Conditioner", 2019 JSRAE Annual Conference, 東京, 2019/09/11
"The Optimal Thermo-Hydraulic Design for the Indoor Unit of a Split-Type Air-Conditioner", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"Numerical Study on the Droplet Separation Efficiency for the Spiral Liquid-Vapor Separation Device in a Falling Film Evaporator", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"Periodic Fluid Flow and Heat Transfer in a Square Cavity Due to an Eccentric Rotating Cylinder", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"The CFD-Based Optimal Design for the Air-to-Air Fixed Plate Membrance Heat Exchanger", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"The Optimal Thermo-Hydraulic Design for the Data Center by Using the Taguchi Method", 2018 JSRAE Annual Conference, Koriyama, 2018/09/04
"A NUMERICAL STUDY OF HEAT AND MOISTURE TRANSPORT AROUND A STANDING HUMAN BODY IN A ROOM", The 9th Asian Conference on Refrigeration and Air-conditioning, Sapporo, 2018/06/10
"THE ENERGY-SAVING EFFECT OF INSTALLING A HEAT RECOVERY VENTILATIOR ON A RESIDENCE HOUSE", The 9th Asian Conference on Refrigeration and Air-conditioning, Sapporo, 2018/06/10
"Heat and Mass Transfer within the Indoor Unit of a Split-Type Air-Conditioner", The 9th Asian Conference on Refrigeration and Air-conditioning, Sapporo, 2018/06/10
"The Comparison of Heat Transfer Performance between Helical Coil Heat Exchanger and Wrap-Around Coil Heat Exchanger", 2016 JSRAE Annual Conference, 神戶, 2016/09/07
"A Study on the Optimal Performance of R410A Vapor Compression Cycle by Taguchi Method", The 8th Asian Conference on Refrigeration and Air Conditioning, 台北市, 2016/05/15
"PERFORMANCE STUDY OF A COMPACT HEAT EXCHANGER WITH FIN-TUBE CORE", The 8th Asian Conference on Refrigeration and Air Conditioning, 台北市, 2016/05/15
"Numerical Study of the Thermo-Hydraulic Field within an Indoor Unit of the Small-Sized Split-Type Air-Conditioner", 2015 JSRAE Annual Conference, 東京, 2015/10/20
"The Impact of an Oscillating Air-Supply Guide Vane on the Thermo-Hydraulic Field in a Square Cavity with Single Inlet and Outlet Ports", ICR 2015, 橫濱, 2015/08/16
"A COMPARATIVE STUDY ON THE OPTIMUM PERFORMANCE OF R410A AND R32 REFRIGERATION CYCLES", ICR 2015, 橫濱, 2015/08/16
"COIL SIDE HEAT TRANSFER CHARACTERISTICS STUDY FOR A HELICAL-COIL HEAT EXCHANGER", ICR 2015, 橫濱, 2015/08/16
"An Experimental Study on the Optimal Performance of R410A Vapor Compression Cycle", The 10th International Green Energy Conference, 台中市, 2015/05/24
"Numerical Study of Similarity Laws for the Cross Flow Fan", International Congress on Natural Sciences and Engineering, 京都, 2015/05/07
"An Experimental Study of Thermosolutal Convection during", 2014 JSRAE Annual Conference, 佐賀, 2014/09/10
"THE THEORETICAL STUDY OF OPTIMAL PERFORMANCE FOR R290 REFRIGERATION CYCLE BY USING TAGUCHI METHOD", 11th IIR Gustav Lorentzen Conference on Natural Refrigerants, 杭州, 2014/08/31
"Numerical Study of Heat and Moisture Transfer in a Human Body-Clothing-Environment System", The 7th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2014/05/18
"PERFORMANCE ANALYSIS OF R32 REFRIGERATION CYCLE BY USING TAGUCHI METHOD", The 7th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2014/05/18
"TIME-VARYING FLOW CHARACTERISTICS OF A CROSS-FLOW FAN", The 7th Asian Conference on Refrigeration and Air Conditioning, 濟州島, 2014/05/18
"The Impact of Periodic Vibration in Vertical Direction on the Development of Double-Diffusive Convection of a Liquid Binary Alloy during the Unidirectional Solidification Process", The 6th Asian Conference on Refrigeration and Air Conditioning, 西安, 2012/08/26
"The Evaluation of Moisture Management Fabrics", The Fiber Society, 2012/05/23
"Solidification of a Liquid Hypo-Eutectic Binary Alloy in an Enclosure with a Side Cooling Wall", ICFMHTT 2012 - International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, 蘇黎士, 2012/01/15
"FLUID FLOW AND ENTROPY GENERATION CHARACTERISTICS ANALYSIS OF THE CHANNEL GEOMETRY IN X-SHAPED MICRO-CHANNELS", Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference, Hamamatsu, Shizuoka, 2011/07/24
"A STUDY Of HEAT AND MOISTURE TRANSPORT ON THE HUMAN BODY-CLOTHING-ENVIRONMENT SYSTEM BY USING A THERMAL MANIKIN", XIV International Conference on Environmental Ergonomics, Nafplio, 2011/07/10
"THE COMPARISON OF THE EVALUATION METHODS FOR MOISTURE MANAGEMENT FABRICS", XIV International Conference on Environmental Ergonomics, Nafplio, 2011/07/10
"The Impact of Converging and Diverging Angle on the X-shaped Micro-Channels", Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, 2011/03/13
"A NUMERICAL STUDY ON THE AIRFLOW DISTRIBUTION WITHIN A NEGATIVE-PRESSURE ISOLATION ROOM", International Symposium on Contamination Control 2010, 東京, 2010/10/05
"The Effect of Periodic Lid-driven Flow on Suppressing the Double-diffusive Convection during Solidification of a Liquid Binary Alloy", The 5th Asian Conference on Refrigeration and Air-conditioning, 東京, 2010/06/07
"Periodic Fluid Flow and Heat Transfer in A Square Cavity due to an Insulated or Isothermal Rotating Rectangular Object", ASME Summer Heat Transfer Conference, 舊金山, 2009/07/19
"AIRFLOW SIMULATION WITHIN A POSITIVE-PRESSURE ISOLATION ROOM", Roomvent 2009, 釜山, 2009/05/24
"The Impact of Periodic Forced Convection on the Double-diffusive Convection of a liquid Binary Alloy during the Unidirectional Solidification Process", The 4th Asian Conference on Refrigeration and Air-conditioning, 台北市, 2009/05/21
"Experimental Study on the Development of Double-diffusive Convection during the Solidification Process of a Liquid Binary Alloy", The 4th Asian Conference on Refrigeration and Air-conditioning, 台北市, 2009/05/21
"Transient Leading to Periodic Fluid Flow and Heat Transfer in a Differentially-Heated Cavity due to an Insulated Rotating Object", 2007 ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, 2007/07/08
"Transient Leading to Periodic Fluid Flow and Heat Transfer in a Cavity with Constant Temperature Walls due to an Isothermal Rotating Object", 2007 ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, 2007/07/08
