"Effects of Calcination Temperature on the Synthesis of One-Pot Sol-Gelled Barium Titanate Powder and Its Performance as an Endodontic Radiopacifier", Materials, 17, 2701, 2024/06, SCI
"Improvement of the Thermal Conductivity and Mechanical Properties of 3D-Printed Polyurethane Composites by Incorporating Hydroxylated Boron Nitride Functional Fillers", Materials, 16, 1, 15, 2023/01, SCI
"A study on Ti-doped Fe3O4 anode for Li ion battery using machine learning, electrochemical and distribution function of relaxation times (DFRTs) analyses", Scientific Reports, 12, 1, 2022/12, SCI
"Interfacial microstructure and mechanical properties of diffusion-bonded W–10Cu composite/AlN ceramic using Ni–P and Ti interlayers", Journal of Alloys and Compounds, 867, 25, 159050, 2021/02, SCI
"Generation of self-assembled 3d network in TPU by insertion of Al2O3/h-BN hybrid for thermal conductivity enhancement", Materials, 14, 2, 1-15, 2021/01, SCI
"Roll-to-roll atomic layer deposition of titania nanocoating on thermally stabilizing lithium nickel cobalt manganese oxide cathodes for lithium ion batteries", ACS Applied Energy Materials, 3, 11, 10619-10631, 2020/11, SCI
"Roll-to-roll atomic layer deposition of titania coating on polymeric separators for lithium ion batteries", Journal of Power Sources, 482, 15, 228896, 2020/09, SCI
"Additive manufacturing of dental prosthesis using pristine and recycled zirconia solvent-based slurry stereolithography", Ceramics International, 46, 8, 28701-28709, 2020/08, SCI
"Enhancing the figure of merit in thermoelectric materials by adding silicate aerogel", Materials Today Physics, 2020/04, SCI
"Synthesis, luminescence properties and theoretical calculations of La5BSi2O13:Dy3+ phosphor coatings for light-emitting diodes", Thin Solid Films, 698, 137865, 2020/03, SCI
"The Effects of Vapor Passage and Structured Evaporator Surfaces on the Performance of Thin Vapor Chambers", Heat and Mass Transfer Research Journal, 3, 2, 2019/12, SCI
"Development of Thermally Conductive Polyurethane Composite by Low Filler Loading of Spherical BN/PMMA Composite Powder", Scientific Reports, 9, 1, 14397, 2019/10, SCI
"Spherical Composite Powder by Coupling Polymethyl Methacrylate and Boron Nitride via Spray Drying for Cosmetic Application", Materials, 12, 706, 1-10, 2019/02, SCI
"Preparation and characterization of CZTS target and thin film using multi-stage hot-pressing process and pulsed laser deposition", Ceramics International, 44, S69-S99, 2018/11, SCI
"A Low-Temperature Alumina/Copper Diffusion Bonding Process using La-Doped Titanium Interlayers", Coatings, 8, 11, 401-410, 2018/11, SCI
"Effects of tempering temperature on fatigue crack propagation behavior of high-strength low-alloy D6AC steel plasma arc welds", Materials Letters, 204, 89-92, 2017/10, SCI
"Microstructure and mechanical properties of Ti-6Al-4V alloy diffused with molybdenum and nickel by double glow plasma surface alloying technique", Journal of Alloys and Compounds, 717, 197-204, 2017/09, SCI
"Effects of water cooling on microstructural evolution, hardness and anti-corrosion properties of Inconel 52 fusion-cladded AISI 316L stainless steel", Surface and Coatings Technology, 322, 218-226, 2017/08, SCI
"Investigation of the anti-adhesion layers for nanoimprint molding”, Microsystem Technologies", Microsystem Technologies, 23, 6, 2207–2214, 2017/06, SCI
"Study on comparing WO3 and W18O49 gas sensing abilities under NO2 environment", Microsystem Technologies, 23, 6, 2113-2123, 2017/06, SCI
"Empirical alloys-by-design theory calculations to the microstructure evolution mechanical properties of Mo-doped laser cladding NiAl composite coatings on medium carbon steel substrates", Journal of Alloys and Compounds, 702, 679-686, 2017/04, SCI
"Measurement and optimization of atmospheric plasma sprayed CoMoCrSi coatings parameters on Ti-6Al-4V substrates affecting microstructural and properties using hybrid abductor induction mechanism", Measurement: Journal of the International Measurement Confederation, 94, 157, 2016/07, SCI
"Document Investigation of materials used in synthesis for silver nanowires and nanoparticles", Sensors and Materials, 28, 5, 485, 2016/05, SCI
"Fibers and Conductive Films Using Silver Nanoparticles and Nanowires by Near-Field Electrospinning Process", Journal of Nanomaterials, 2015, 494052, 2016/01, SCI
"Study of field emission properties of tungsten oxide and titanium-oxide-doped tungsten oxide nanowires", Materials Chemistry and Physics, 153, 353*358, 2015/01, SCI
"Evaluation of the microstructural and photocatalytic properties of aluminum-doped zinc oxide coatings deposited by plasma spraying", Thin Solid Films, 544, 170-174, 2014/10, SCI
"Microstructure and Mechanical Properties of AlN/Cu Brazed Joints", Journal of Materials Engineering and Performance, 23, 9, 3299-3304, 2014/09, SCI
"Ultrasonic sensing device with ZnO piezoelectric nanorods by selectively electrospraying method", Sensors and Actuators A: Physical, 216, 318-327, 2014/09, SCI
"Cosmetic properties of TiO2/mica-BN composite powder prepared by spray drying", Ceramics International, 40, 5, 6903-6911, 2014/06, SCI
"A flexible sensing device based on a PVDF/MWCNT composite nanofiber array with an interdigital electrode", Sensors and Actuators A: Physical, 41, 78-88, 2014/05, SCI
"The optical properties and sunscreen application of spherical h-BN–TiO2/mica composite powder", Ceramic International, 40, 3, 4691-4696, 2014/04, SCI
"Al2O3/SUS304 brazing via AgCuTi-W composite as active filler", Journal of Materials Engineering and Performance, 23, 3, 906-911, 2014/03, SCI
"Fabrication of Light Extraction Efficiency of Organic Light-Emitting Diodes with 3D Aspherical Microlens by Using Dry Etching Process", Journal of Nanomaterials, 2013, Article ID 797534, 6, 2013/10, SCI
"Effects of Ga accumulation on the microstructure of Cu(In1-x,Gax)Se2 thin films during selenization", Journal of Alloys and Compounds, 581, 250-256, 2013/07, SCI
"Wear Resistance and Microstructural Properties of Ni-Al/h-BN/WC-Co Coatings Deposited using Plasma Spraying", Materials Characterization, 79, 84-92, 2013/05, SCI
"Microstructural characterization of CIGS formation using different selenization processes", Applied Surface Science, 270, 139-144, 2013/01, SCI
"Microstructural revolution of CIGS thin film using CuInGa ternary target during sputtering process", Applied Surface Science, 263, 476-480, 2012/12, SCI
"The effect of deposition parameters and post treatment on the electrical properties of Mo thin films", Thin Solid Films, 520, 18, 5936-5939, 2012/07, SCI
"Non-catalytic and substrate-free method to titania-doped W18O49 nanorods: Growth, characterizations, and electro-optical properties", Journal of Nanoparticle Research, 14, 1, 665-674, 2012/01, SCI
"Effects of Chamber Height on the Vapor Chamber Performance", Experimental Heat Transfer, 25, 1-11, 2012/01, SCI
"A Study of Wear and Corrosion Resistance of Arc-Sprayed Ni-Ti Composite Coatings", Journal of Thermal Spray Technology, 20, 6, 1278-1285, 2011/12, SCI
"High-yield fabrication of W18O49@TiO2 core-shell nanoparticles: Microstructures and optical-thermal properties", Journal of Nanoparticle Research, 13, 4549-4555, 2011/10, SCI
"A facile route to tungsten oxide nanomaterials with controlled morphology and structure", Particuology, 9, 5, 517-521, 2011/10, SCI
"The microstructural characteristics and mechanical properties of Ni-Al/h-BN coatings deposited using plasma spraying", Journal of Alloys and Compounds, 509, 32, 8239-8245, 2011/08, SCI
"The effects of the morphology on the CIGS thin films prepared by CuInGa single precursors", Solar Energy Materials and Solar Cells, 95, 1, 261-263, 2011/01, SCI
"Mechanical behavior of TiN/CrN nano-multilayer thin film deposited by unbalanced magnetron sputter process", Journal of Alloys and Compounds, 509, 6, 3197-3201, 2011/01, SCI
"he Effect of Processing Parameters on the Synthesis of Tungsten Oxide Nanomaterials by a Modified Plasma Arc Gas Condensation Technique", Journal of Nanoscience and Nanotechnology, 10, 5461-5466, 2010/10, SCI
"Structure and optical properties of tungsten oxide nanomaterials prepared by a modified plasma arc gas condensation technique", Journal of Nanoparticle Research, 12, 5, 1755-1763, 2010/06, SCI
"Analysis on microstructure and characteristics of TiAlN/CrN nano-multilayer films deposited by cathodic arc deposition", Thin Solid Films, 518, 24, 7519-7522, 2010/05, SCI
"Mechanical behavior of metallic glasses Mg–Cu–Y using nano-indentation", Microsystem Technologies, 16, 4, 585-593, 2010/04, SCI
"Study of scratching Mg-based BMG using nanoindenter with Berkovich probe", Materials Science and Engineering A, 527, 9, pp. 2342-2349, 2010/04, SCI
"Tungsten Oxide Nanopowders and Nanorods Prepared by a Modified Plasma Arc Gas Condensation Technique", Materials Transactions, 50, 11, pp. 2593-2597, 2009/10, SCI
"Direct rout to tungsten oxide nanorod bundles: Microstructures and electro-optical properties", Journal of Physical Chemistry C, 113, 10, 4042-4046, 2009/03, SCI
"Study of Micro-lens Array by Reflow Process", Journal of Modern Optics, 55, 17, 2845-2858, 2008/10, SCI
"Study of cutting quality for TFT-LCD glass substrate", International Journal of Advanced Manufacturing Technology, 39, 1071-1079, 2008/10, SCI
"A novel method to produce carbon nanotubes using EDM process", International Journal of Machine Tools and Manufacture, 48, 1653–1657, 2008/10, SCI
"Oxygen Partial Pressure Effect on the Preparation of Nanocrystalline Tungsten Oxide Powders by a Plasma Arc Gas Condensation Technique", International Journal of Refractory Metals and Hard Materials, 26, 423-428, 2008/07, SCI
"Investigation of the microstructure and characterizations of TiN/CrN nano-multilayer deposited by unbalanced magnetron sputter process", Surface & Coatings Technology, 203, 5-7, 657-660, 2008/06, SCI
"Characterization of Spray Pyrolyzed Manganese Oxide Powders Deposited by Electrophoretic Deposition Technique", Surface and Coatings Technology, 202, 4-7, 1277-1281, 2007/12, SCI
"新一代均熱板的發展現況", 熱管理產業通訊, 8, 25-33, 2007/11, ELSE1
"A splats obtaining system for thermal spray deposits", Materials Science Forum, 561-565, 1169-1172, 2007/10, EI
"Characterization and Modification of Nanocrystalline Iron Oxide Powders Prepared by an Inert Gas Condensation Technique", Materials Science Forum, 561-565, 1379-1382, 2007/10, EI
"Formation of tungsten oxide encapsulated in titanium oxide nanocages by a modified plasma arc gas condensation", Nanotechnology, 18, 15, 2007/04, SCI
"Characterization of Nanocrystalline Manganese Oxide Powders Prepared by Gas Condensation Technique", The Chinese Journal of Process Engineering, 2, 6, 235-239, 2006/12, EI
"The failure mechanism of diamond like coatings prepared by the filtered cathodic arc technique for minting application", Surface and Coatings Technology, 201, 7, 4430-4435, 2006/12, SCI
"Effect of optical properties in the different additional elements of the Silver alloy reflective layer", Thin Solid Films, 515, 3, 936-941, 2006/11, SCI
"Preparation and Characterization of Electrophoretically Deposited Nanocrystalline TiO2 Films", The Chinese Journal of Process Engineering, 4, 1, 397-402, 2004/09, EI
"Characterization of Plasma Sprayed Al2O3/13wt%TiO2 Coatings with Nanocrystalline Powders", The Chinese Journal of Process Engineering, 4, 1, 84-88, 2004/09, EI
"The Study on the Interface Characterization of Indium-Based Filler Metal and Cu Solder Joints", 銲接與切割, 13, 1, 54-59, 2003/01, ELSE1
"The Study on Diffusion Bonding for Aluminum Alloys and Pure Copper", 銲接與切割, 12, 5, 34-38, 2002/10, ELSE1
"The Study on TLP diffusion bonding process of SiC particle reinforced Al-based composite and Aluminium alloy", 銲接與切割, 12, 2, 53-58, 2002/03, ELSE1
"Investigation of Thermoplastic Polyurethane Foam for Selective Laser Sintering Application", 22nd International Conference on Advances in Materials and Processing Technology, 台北, 2019/10/20
"Study on the AlN/Al Diffusion Bonding using Ti Premetallization", 10th International Conference Materials for Advanced Technologies, 新加坡, 2019/06/23
"Investigation of Thermoplastic Polyurethane/Carbon Nanohybrids for Selective Laser Sintering Application", 10th International Conference Materials for Advanced Technologies, 新加坡, 2019/06/23
"Tantalum Carbide Coatings on Graphite Crucible", 10th International Conference on Materials for Advanced Technologies, 新加坡, 2019/06/23
"Preparation and characterization of CZTS target and thin film using multi-stage hot-pressing process and pulsed laser deposition", 2018 ISAF-FMA-AMF-AMEC-PFM (IFAAP) Joint Conference, Hiroshima, 2018/05/27
"An investigation of thermal sprayed titanium/micro-arc anodic composite coating on wear and corrosion resistant performance", 5th International Meeting on Developments in Materials, Processes, and Applications of Emerging Technologies, Alvor, 2011/06/27
"The phase transformation of BN in Ni-5Al/BN coating by HVOF thermal spraying", 第五屆材料、製程和應用關鍵技術發展國際研討會研討會(MPA 2011), Alvor, 2011/06/27
"A facile route to tungsten oxide nanomaterials with controlled morphology and structure", 2nd Japan – Taiwan Workshop on Advanced Materials and Devices for Future Medical Engineering, Taipei, 2010/11/23
"Preparation and Modification of Tungsten Oxide Nanomaterials by Vapor-Solid Route", 第七屆海峽兩岸超微顆粒學術研討會, 西安, 2010/08/15
"Comparison of hBN addition NiAl coatings deposited using APS and HVOF thermal spraying", International Thermal Spray Conference and Exposition, Singapore, 2010/05/03
"Direct Route to Fabrication and Characterization of W18O49/TiO2 Core-Shell Nanoparticles", IEEE International NanoElectronics Conference (INEC) 2010, Hong Kong, China, 2010/01/03
"The effects of the morphology on the CIGS thin films prepared by CuInGa single precursors", 19th International Photovoltaic Science and Engineering Conference and Exhibition, Jeju, 2009/11/09
"Enhanced Efficiency of TiO2 Photoanodes Modified with WO3-x Nanomaterials in Dye-Sensitized Solar Cells", 34th IEEE Photovoltaic Specialists Conference, Philadelphia, PA, 2009/06/07
"Optical reflective performance of copper alloy thin films with Ti-Zr and Al-Zr additions", International Conference on Metallurgical Coatings and Thin Films, San Diego, California, 2009/04/27
"Preparation and properties of W5O14 nanomaterials", First Japan – Taiwan Workshop on Advanced Materials and Devices for Future Medical Engineering, Tokyo, 2008/09/01
"An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance", The 4th International Conference on Technological Advances of Thin Films & Surface Coatings (Thin Films 2008), Singapore, 2008/07/13
"Fabrication and Optical property of Ti-doped W18O49 Nanowires using a Modified Plasma Arc Gas Condensation Technique", The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, 2008/07/13
"Electro-optical properties of CIGS thin films prepared by magnetron sputtering", The 4th International Conference on Technological Advances of Thin Films & Surface Coatings (Thin Films 2008), Singapore, 2008/07/13
"Production of Carbon Nanotubes by Single-Pulse Discharge in Air", The 8th Asia Pacific Conference on Materials Processing, 2008/06/16
"Investigation of the microstructure and characterizations of TiN/CrN nano-multilayer deposited by unbalanced magnetron sputter process", International Conference on Metallurgical Coatings and Thin Films, San Diego, California, 2008/04/28
"Nanosized Amorphous Tungsten Oxide Films for Gas Sensing Applications", International Conference on Metallurgical Coatings and Thin Films, San Diego, California, 2008/04/28
"A study on the absorption layers of CIGS solar cells prepared with complex targets", International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications, Pingtung, 2007/11/04
"工具鋼與鎳之擴散接合研究", 九十六年度台灣銲接年會, 台南, 2007/10/26
"The Effect of Processing Parameters on the Synthesis of Tungsten Oxide Nanomaterials by a Modified Plasma Arc Gas Condensation Technique", 6th International Conference on Materials Processing for Properties and Performance(MP3 2007), Beijing, 2007/09/14
"A modified plasma arc gas condensation technique for the synthesis of tungsten oxide-based materials with various morphologies and structures", Nanotechnology Conference and Trade Show-Nanotech 2007, California, 2007/04/23
"Characterization of Spray Pyrolyzed Manganese Oxide Powders Deposited by Electrophoretic Deposition Technique", International Conference on Metallurgical Coatings and Thin Films, California, 2007/04/23
"Elucidating the Characteristics of Plasma Spraying Boron Carbide Coatings Applied for High-Density Plasma Devices", International Conference on Metallurgical Coatings and Thin Films, California, 2007/04/23
"Advancement of protective thin films with a high transparency reacted using cathoid vacuum arc deposited method", Japan/Taiwan/Korea Chemical Engineering Conference, Kagoshima, 2006/11/17
"Characterization of Nanocrystalline Manganese Oxide Powders Prepared by Gas Condensation Technique", 中国颗粒学会2006年会暨海峡两岸颗粒技术研讨会, 北京, 2006/08/18
"Effect of optical properties in the different additional elements of the Silver alloy reflective layer", International Conference on Metallurgical Coatings and Thin Films, San Diego, 2006/05/01
"The failure mechanism of diamond like coatings prepared by the filtered cathodic arc technique for minting application", International Conference on Metallurgical Coatings and Thin Films, San Diego, 2006/05/01
"Oxygen Partial Pressure Effect on the Preparation of Nanocrystalline Tungsten Oxide Powders by a Plasma Arc Gas Condensation Technique", The 2nd International Symposium on Point Defect and Nonstoichiometry, Kaohsiung, 2005/10/04
"Polymerization-like Grafting of Thermoplastic Polyurethane by Microwave Plasma Treatment", The 3rd Asian Conference on Chemical Vapor Deposition, Taipei, 2004/11/12
"Characterization of Plasma Sprayed Al2O3/13wt%TiO2 Coatings with Nanocrystalline Powders", 中國顆粒學會年會暨海峽兩岸顆粒技術研討會, 煙台, 2004/08/29
"Preparation and Characterization of Electrophoretically Deposited Nanocrystalline TiO2 Films", 中國顆粒學會年會暨海峽兩岸顆粒技術研討會, 煙台, 2004/08/29
"Acoustic Emission Responses During Indentation of Coatings with Various Grain Size", International Thermal Spray Conference(ITSC 2004), Osaka, 2004/05/10
