"Improvement in Vibration of Hybrid Powertrain with Combined Control Methods", Sensors and Materials, 35, 6, 20, 2023/06, SCI
"Experimental Investigation of Fire Extinguishing of a Full-Size Battery Box with FK-5-1-12", Fire Technology, Springer Nature, 022, 01273, 14, 2022/06, SCI
"Developing a Strategy to Improve Handling Behaviors of a Medium-Size Electric Bus Using Active Anti-Roll Bar", Symmetry, 12, 1334, 33, 2020/08, SCI
"Optimized Fuel Economy Control of Power-Split Hybrid Electric Vehicle with Particle Swarm Optimization", Energies, 13, 9, 2278, 18, 2020/05, SCI
"Developing Equivalent Consumption Minimization Strategy for Advanced Hybrid System-II Electric Vehicles", Energies, 13, 9, 2033, 19, 2020/04, SCI
"Control Strategy Development of Driveline Vibration Reduction for Power-Split Hybrid Vehicles", Applied Sciences, 10, 1712, 13, 2020/03, SCI
"Optimization and Application for Hydraulic Electric Hybrid Vehicle", Energies, 13, 322, 17, 2020/01, SCI
"Life-span: A Development of 2nd life EV battery for Energy Storage System", IEKConsulting, 2019/06, ELSE1
"Front impact analysis and design improvement for an electric all-terrain vehicle", Applied System Innovation, 1-11, 2016/06, EI
"Optimizing the Heat Dissipation of an Electric Vehicle Battery Pack", Advances in Mechanical Engineering, 2014, 2014/12, SCI
"Engine auto start/stop dynamic analysis and vibration reduction for two-mode hybrid vehicle", Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering., 2013/05, SCI
"Thermal enhancement in a flat-plate solar water collector by flow pulsation and metal-foam blocks", International Journal of Heat and Mass Transfer, 2013/02, SCI
"Minimizing seat track vibration that is caused by the automatic start/stop of an engine in a power-split hybrid electric vehicle", Journal of Vibration and Acoustics-Transactions of the ASME, 2013/01, SCI
"Enhanced forced convective cooling of heat sources by metal-foam porous layers", International Journal of Heat and Mass Transfer, 58, 356-373, 2013/01, SCI
"Light Weight Design for a Concept Sports Car using Composite Material", Applied Mechanics and Materials (ISSN:1660-9336, Trans Tech Publications), 284-287, 608-612, 2013/01, EI
"Spot Weld Property Testing and Simulation Modeling with Failure Criteria", Applied Mechanics and Materials (ISSN:1660-9336, Trans Tech Publications), 284-287, 198-203, 2013/01, EI
"Bolted joint torque setting using numerical simulation and experiments", Journal of Mechanical Science and Technology, 2012/12, SCI
"Correlation of Vickers Hardness with other Mechanical Properties of Sub-zones of Resistance Spot Weld of SPCC Steel", Applied Mechanics and Materials (ISSN:1660-9336, Trans Tech Publications), 157-158, 1404-1409, 2012/01, EI
"Vehicle Dynamic Analysis and Fatigue Prediction", Applied Mechanics and Materials (ISSN:1660-9336, Trans Tech Publications), 157-158, 1025-1030, 2012/01, EI
"Noise and vibration on the bogie of a mass rapid train", Journal of Mechanical Science and Technology, 25, 10, 2519-2528, 2011/10, SCI
"Crashworthiness Analysis of a Railway Vehicle", IEEE International Conference on Applied System Innovation (ICASI) 2022, Nantau, Taiwan, 2022/04/21
"以有限元素分析進行電機轉部拆除治具應力分析", The 26th National Conference on Vehicle Engineering, Da-Yeh University., Changhua, 2021/11/12
"身修復方式對衝擊碰撞之影響", The 26th National Conference on Vehicle Engineering, Da-Yeh University., Changhua, 2021/11/12
"Aero-acoustic Noise Analysis and Shape Optimization of a Side Rear-view Mirror", International Conference of Automotive Technology for Young Engineers 2020-2021, KANTO, 2021/03/11
"Energy Efficiency Improvement with Hydraulic Electric Hybrid Vehicles", 2019 IEEE International Conference on Computation, Communication and Engineering, Longyan, Fujian, 2019/11/08
"Driveline Vibration Reduction of Two-Mode Hybrid System", 2019 IEEE International Conference on Computation, Communication and Engineering, Longyan, Fujian, 2019/11/08
"Noise and Vibration Analysis for a Midsize Electric Bus Using Boundary Element Method", The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI2016), 台中, 2016/10/28
"Fabrication and Measure of Scroll Air Compressor with Involute of Variable-Radii Circle", 旭泰科技論文獎與ICCPE2016國際研討會, Pintung, Taiwan, 2016/10/01
"Analysis of Enhanced Electronic Cooling byPulsating Impinging Flow and Porous Covers", 2016 Annual Conference of the Japan Society of Refrigeration and Air Conditioning (2016年度日本冷凍空調學會研討會), 神戶, 2016/09/06
"Analysis of Mixed Convection Thermal Enhancement in a Novel Flat-Plate Solar Water", 2016 Annual Conference of the Japan Society of Refrigeration and Air Conditioning (2016年度日本冷凍空調學會研討會), 神戶, 2016/09/06
"Forced Impinging Cooling Enhancement Across Multiple Heated Blocks By Porous", 2016 Annual Conference of the Japan Society of Refrigeration and Air Conditioning (2016年度日本冷凍空調學會研討會), 神戶, 2016/09/06
"Energy Management Optimization of Power Split Hybrid Electric Vehicle", 2016 Computational Modeling, Simulation and Applied Mathematics, 曼谷, 2016/07/24
"Control Strategy for Two-Mode Hybrid Electric Vehicle by Using Fuzzy Controller", ICAE Prague 2015: 17th International Conference on Automotive Engineering, 布拉格, 2015/07/09
"Front impact analysis and design improvement for an electric all-terrain vehicle", 2015 Internaitonal Conference on Applied System Innovation, Osaka, 2015/05/22
"Noise Reduction of Electrically Powered mass Rapid Train by Improving the Contact Conditions between the Rubbing Plates and the Friction Blocks, Paper No SAE 2009-01-2094", SAE 2009 Noise and Vibration Conference and Exhibition, St. Charles, Illinois, 2009/05/19
