按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

張世賢教授Shih-Hsien Chang

現職:
臺北科大/材料科學與工程研究所
聯絡方式:

期刊論文

  • "Microstructures evolution and properties of titanium vacuum sintering on metal injection molding 316 stainless steel via dip coating process", Journal of Manufacturing Processes, 2025/01, SCI&EI
  • "Microstructural evolution, phase transformation, and mechanical properties of Corrax-Ta40Nb60C-VC composite using vacuum sintering, solid-solution, sub-zero, and aging treatments", Journal of Alloys and Compounds, Vol. 1010, 177356, 2025/01, SCI&EI
  • "熱處理對添加Ta50Nb50C及Ta50Nb50C-B4C微粉於Vanadis 60高速鋼其顯微組織和機械性質之影響", 金屬熱處理, 2024/12, ELSE1
  • "Microstructures evolution and properties of titanium vacuum sintering on metal injection molding 316 stainless steel via dip coating process", Journal of Manufacturing Processe, Vol. 131, 1073-1085, 2024/12, SCI&EI
  • "Enhancement of the compressive performances of additive manufactured Corrax maraging stainless steel lattice by heat treatment", Journal of Materials Research and Technology, Vol. 33, 1640-1653, 2024/11, SCI&EI
  • "真空熱壓燒結壓力對鈷鉬鎳中熵合金的顯微組織和機械性質之影響", 粉體及粉末冶金會刊, 第49卷, 第4期, 288-297, 2024/11, ELSE1
  • "Microstructure, mechanical properties, and wear behaviors of CrSiN films on oxynitriding-treated Vanadis 60 high-speed steel by the direct current magnetron sputtering process", Thin Solid Films, 2024/07, SCI&EI
  • "Microstructure, material characteristics and mechanical properties of CoMoNiTa3 medium-entropy alloys through the vacuum hot pressing process", Powder Metallurgy, Vol. 67, No.2-3, 154-168, 2024/06, SCI&EI
  • "以直流磁控濺鍍法製備CrN與CrSiN薄膜於氮氧化處理 Vanadis 23高速鋼之性質研究", 金屬熱處理, 2024/06, ELSE1
  • "以直流磁控濺鍍法製備CrN與CrSiN薄膜於氮氧化處理 Vanadis 23高速鋼之性質研究", 金屬熱處理, 第161期, 31-43, 2024/06, ELSE1
  • "真空熱壓燒結製程溫度對鈷鉬鎳合金其顯微組織與材料特性之影響", 礦冶, 第68卷, 第266期, 32-40, 2024/06, ELSE1
  • "Novel functionally-graded material design of additive manufactured Corrax maraging stainless steel lattice", Materials and Design, Vol. 241, 112942, 2024/05, SCI&EI
  • "Investigation of the microstructural characteristics and mechanical properties of vacuum-sintered Ti-8Mo-3Mn-xVC composites", Vacuum, Vol. 222, 113035, 2024/04, SCI&EI
  • "Effect of Mn content on mechanical properties and corrosion resistance of Ti-8Mo-xMn alloys through the vacuum sintering process", Vacuum, Vol. 222, 112959, 2024/04, SCI&EI
  • "碳化鈦瓷金結合440C不�瓡�材料並添加Ni、Mo與WC微粉之顯微結構及性質分析", 粉體及粉末冶金會刊, 第49卷, 第1期, 16-28, 2024/02, ELSE1
  • "Improving the corrosion and wear resistance of CoCrNiSi0.3 Medium-Entropy Alloy by magnetron sputtered (CrN/Cr)x multilayer film", Surface & Coatings Technology, Vol. 478, 130407, 2024/02, SCI&EI
  • "Microstructure, strengthening mechanism and mechanical properties of Vanadis 60-Ta0.5Nb0.5C-B4C high-speed steel composite via vacuum sintering, sub-zero, and heat treatment", ISIJ International, Vol. 64, No.1, 154-164, 2024/01, SCI&EI
  • "Effect of TaC Powder Addition on the Microstructure and Mechanical Properties of Ti-Nb-Mn Alloy via Vacuum Sintering Process", Materials Transactions, Vol. 64, No.12, 2714-2721, 2023/12, SCI&EI
  • "The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel", Materials Science and Engineering: A, Vol. 887, 145744, 2023/11, SCI&EI
  • "Effects of the microstructure and strengthening mechanisms of Mo2C powders being added to Ti-8Nb-4Co alloy via the vacuum sintering process", Archives of Metallurgy and Materials, Vol. 68, No. 4, 1255-1265, 2023/11, SCI&EI
  • "利用真空燒結及熱均壓處理製備添加碳化鈮-碳化鉭微粉之PM23高速鋼研究", 粉體及粉末冶金會刊, 第48卷, 第4期, 299-309, 2023/11, ELSE1
  • "Effects of the vacuum hot pressing process on the microstructures, strengthening mechanisms and mechanical properties of Ni-35Cr-12Mo-3Nb alloys", Vacuum, Vol. 213, 112139, 2023/07, SCI&EI
  • "Improvement of the wear resistance and corrosion properties of CrN Films on oxynitriding-treated Vanadis 23 high-speed steel by the DC magnetron sputtering process", Materials Transactions, Vol. 64, No. 7, 1631-1637, 2023/07, SCI&EI
  • "Novel laser powder bed fusion Corrax maraging stainless steel lattice with superior specific strength and energy absorption", Journal of Materials Research and Technology, Vol. 25, 5240-5248, 2023/07, SCI&EI
  • "利用直流磁控濺鍍法製備CrN鍍層於氧氮化處理的Vanadis 23高速鋼之磨耗行為研究", 冶, 第67卷, 第262期, 40-49, 2023/06, ELSE1
  • "真空燒結法對鈦鈮錳合金的顯微組織與機械性質之研究", 金屬熱處理, 第157期, 55-61, 2023/06, ELSE1
  • "Microstructure, retained austenite, and mechanical properties evaluation of Vanadis 60-HfC-Ta0.6Nb0.4C steel matrix composite by vacuum sintering, sub-zero and heat treatments", Vacuum, Vol. 210, 111885, 2023/04, SCI&EI
  • "In situ TEM observation of the microstructure characteristics on the vacuum sintering, sub-zero and heat treatments of Vanadis 23 high-speed steel by adding Cr3C2-TaC-TiC powders", Powder Metallurgy, Vol. 66, No. 2, 151-163, 2023/04, SCI&EI
  • "真空熱壓燒結壓力對鎳鉻鉬合金的顯微組織與材料特性之影響", 粉體及粉末冶金會刊, 第48卷, 第1期, 56-64, 2023/02, ELSE1
  • "Improvement of corrosion and wear resistance of CoCrNiSi0.3 medium-entropy alloy by sputtering CrN film", Materials, Vol. 16, Issue 4, 1482, 2023/02, SCI&EI
  • "Influence of the vacuum hot pressing process on the microstructure, mechanical properties, and material characteristics of CrCoNiTa3 alloys", Vacuum, Vol. 207, 111637, 2023/01, SCI&EI
  • "利用非平衡磁控濺鍍法沉積CrN、CrCN及AlCrN鍍層於氮氧化處理的Dievar工具鋼之性質研究", 金屬熱處理, 第155期, 66-78, 2022/12, ELSE1
  • "真空熱壓燒結壓力對鉻鈷鎳中熵合金其顯微組織與機械性質之影響", 粉體與粉末冶金會刊, 第47卷, 第4期, 351-358, 2022/11, ELSE1
  • "Investigation of the wear and corrosion behaviors of CrN films onto oxynitriding-treated AISI H13 alloy steel by the Direct Current magnetron sputtering process", Thin Solid Films, Vol. 758, 139434, 2022/09, SCI&EI
  • "熱處理對添加Cr3C2及Cr3C2-TaC-TiC微粉之Vanadis 23高速鋼其機械性質與顯微組織之影響", 金屬熱處理, 第154期, 31-38, 2022/09, ELSE1
  • "Investigation of the microstructure and strengthening mechanisms of Ti-6Cu-8Nb-xCr3C2 alloy through vacuum sintering process", Archives of Metallurgy and Materials, Vol. 67, No. 3, 815-825, 2022/06, SCI&EI
  • "Study on the microstructure, electrical and mechanical properties of hot pressing sintering Cr50Ni50 alloys fabricated by adding various ratios of nanosized nickel powers", Aechies of Metallurgy and Materials, Vol. 67, No. 3, 955-961, 2022/06, SCI&EI
  • "Investigation of the vacuum hot pressing process on the mechanical properties, microstructures and material characteristics of Ni-35Mo-15Cr alloys", Powder Metallurgy, Vol. 65, No. 2, 141-150, 2022/04, SCI&EI
  • "Wear and Corrosion Resistance of CrN Films on Oxynitriding-treated Vanadis 8 Tool Steel via the DC Magnetron Sputtering Process", ISIJ International, Vol. 62, No. 1, 218-226, 2022/01, SCI&EI
  • "利用非平衡磁控濺鍍法製備 CrCN與CrN薄膜於氮氧化處理 Vanadis 8工具鋼之性質研究", 金屬熱處理, 第151期, 42-55, 2021/12, ELSE1
  • "利用直流磁控濺鍍法製備CrN鍍層於氮氧化處理Dievar工具鋼之機械性質與腐蝕行為研究", 冶, 第65卷, 第256期, 65-75, 2021/12, ELSE1
  • "真空熱壓燒結溫度對鎳-50 wt%鉬合金其顯微組織與材料特性之影響", 礦冶, 第65卷, 第255期, 57-66, 2021/09, ELSE1
  • "熱處理對添加NbC及NbC-TaC微粉之PM 23高速鋼其機械性質與顯微組織之影響", 金屬熱處理, 第150期, 48-54, 2021/09, ELSE1
  • "真空燒結法對鈦銅鈮合金的顯微組織與強化機制之研究", 金屬熱處理, 第149期, 12-18, 2021/06, ELSE1
  • "真空燒結熱處理製備鈦鉭鎳合金的微觀組織與強化機制探討", 金屬熱處理, 第149期, 55-61, 2021/06, ELSE1
  • "真空熱壓燒結壓力對鎳-50 wt%鉬合金其顯微組織與機械性質之影響", 粉體與粉末冶金會刊, 第46卷, 第2期, 106-113, 2021/05, ELSE1
  • "Evaluation of the strengthening mechanism and mechanical properties of high alloyed PM 23NbCTaC composite materials through vacuum sintering sub-zero and heat treatments", Vacuum, Vol. 187, 110132, 2021/05, SCI&EI
  • "Optimization of DLC films on oxynitriding-treated Vanadis 10 tool steel through the various duty cycles of dc-pulsed plasma enhanced CVD", Kovov materily - Metallic Materials, Vol. 59, No. 2, 109-118, 2021/05, SCI&EI
  • "valuation of the microstructures, strengthening mechanisms and corrosion behaviors of TiB2 powder added to Ti-8Ta-6Ni alloys through the vacuum sintering process", Journal of Alloys and Compounds, Vol. 857, 157629, 2021/03, SCI&EI
  • "利用直流磁控濺鍍法製備CrN鍍層於氧氮化處理的Vanadis 8工具鋼之性質研究", �Y冶, 第65卷, 253, 75-85, 2021/03, ELSE1
  • "真空燒結法製備MIM SUS-316L不�瓡�添加碳化鉭微粉之顯微結構及機械性質之研究", 金屬熱處理, 第147期, 71-76, 2020/12, ELSE1
  • "熱處理對真空燒結PM 23-NbC-TaC高速鋼複合材料機械性質與顯微組織之影", 粉體與粉末冶金會刊, 第45卷, 第4期, 275-281, 2020/11, ELSE1
  • "真空燒結及熱均壓處理對不同鈷含量的碳化鎢合金之顯微結構與機械性質影響探討", 粉體與粉末冶金會刊, 第45卷, 第4期, 220-232, 2020/11, ELSE1
  • "熱處理對添加ZrC及ZrC-TiC微粉之Vanadis 4 Extra工具鋼其機械性質與顯微組織之影響", 金屬熱處理, 第146期, 30-38, 2020/09, ELSE1
  • "In situ TEM observation of the microstructural characteristics and mechanical properties of vacuum hot-press sintered Co-30Cr-6Mo alloys", Vacuum, Vol. 176, Article 109333, 2020/06, SCI&EI
  • "利用直流脈衝電漿輔助化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理Vanadis 10工具鋼之性質研究", 礦冶, 第64卷, 250, 44-53, 2020/06, ELSE1
  • "Microstructure and properties of composite produced by vacuum sintering of Vanadis 4 Extra steel powder with tantalum carbides and following heat treatment", Archives of Metallurgy and Materials, Vol. 65, No. 2, 555-563, 2020/05, SCI&EI
  • "真空熱壓燒結製程溫度對鈷鉻鉬合金其顯微組織與材料特性之影響", 粉體與粉末冶金會刊, 第45卷, 第2期, 122-127, 2020/05, ELSE1
  • "Characteristics of DLC/oxynitriding duplex-treated V8 tool steel by dc-pulsed PECVD", Surface Engineering, Vol. 36, No. 5, 516-523, 2020/05, SCI&EI
  • "Investigation of the strengthening mechanism and corrosion behaviors of Vanadis 4 extra tool steel adding ZrCTiC powders through vacuum sintering, and sub-zero and heat treatments", Powder Metallurgy, Vol. 63, No. 2, 104-115, 2020/05, SCI&EI
  • "真空熱壓燒結溫度對鈷鉻鉬鈮合金顯微組織與材料特性之研究", 礦冶, 第64卷, 249, 56-64, 2020/03, ELSE1
  • "Effects of mechanical properties on precipitation hardening steel by SLM, HIP, solid-solution and aging treatments", Powder Metallurgy, Vol. 63, No. 1, 19-26, 2020/03, SCI&EI
  • "利用非平衡磁控濺鍍法濺鍍CrN與CrC薄膜於氮氧化處理PM30粉末高速鋼之研究", 金屬熱處理, 第144期, 35-47, 2020/03, ELSE1
  • "真空燒結Vanadis 4 Extra-ZrC-TiC工具鋼複合材料機械性質與顯微組織之影響", 粉體與粉末冶金會刊, 第45卷, 第1期, 16-21, 2020/02, ELSE1
  • "Study on the Sintered Characteristics and Properties of Co-30 mass% Cr Alloys under Various Vacuum Hot-Press Sintering Temperatures and Pressures", Archives of Metallurgy and Materials, Vol. 65, No. 1, 393-402, 2020/02, SCI&EI
  • "以真空燒結、熱均壓、深及熱處等製程製備添加VC和Cr3C2粉末之V4工具鋼複合材之性質研究", 粉體與粉末冶金會刊, 第44卷, 第4期, 279-290, 2019/11, ELSE1
  • "真空燒結法製備鈦鉭合金添加鐵、鎳微粉之微觀組織及強化機制", 粉體與粉末冶金會刊, 第44卷, 第4期, 291-302, 2019/11, ELSE1
  • "Evaluation of the microstructure and properties of Cr3C2 powders added to Vanadis 4 alloy steel via vacuum sintering and heat treatments", Kovové Materiály- Metallic Materials, Vol. 57, No. 5, 317-327, 2019/09, SCI&EI
  • "The effects of adding nano-scaled niobium carbide on the microstructure, mechanical strength and polarization resistance of Ti-8Mo-4Co-xNbC (1, 3, 5 wt%) powder alloys", Materials Chemistry and Physics, Vol. 235, Article 121743, 2019/09, SCI&EI
  • "Mechanical Properties and Microstructures of Mo2C Strengthened Vanadis 4 Extra Alloy Steel by Powder Metallurgy and Heat Treatments", ISIJ International, Vol. 59, No. 7, 1353-1361, 2019/07, SCI&EI
  • "熱處理對添加TaC微粉於Vanadis 4 Extra工具鋼其顯微組織和機械性質之研究", 金屬熱處理, 第141期, 26-33, 2019/06, ELSE1
  • "以直流脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理Vanadis 8工具鋼之特性研究", 礦冶, 第63卷, 246, 63-71, 2019/06, ELSE1
  • "Effect of CrSi/CrSi2 content on the microstructure and properties of vacuum hot-pressed Cr-50 wt% Si alloys", Vacuum, Vol. 162, 54-62, 2019/04, SCI&EI
  • "利用真空燒結法探討鈦鉭合金的微觀組織與強化機制", 金屬熱處理, 第140期, 62-69, 2019/03, ELSE1
  • "真空熱壓燒結壓力對Cr-60 wt% Si合金顯微組織與材料特性之研究", 礦冶, Vol. 63, 245, 59-66, 2019/03, ELSE1
  • "Effect of vacuum hot-press process on the sintered characteristics and mechanical properties of a high-density Cr-31.2 mass% Ti alloy", Archives of Metallurgy and Materials, Vol. 63, No. 4, 1715-1723, 2018/11, SCI&EI
  • "熱均壓與熱處理對不同雷射掃描間距之選擇性雷射熔融析出硬化型不�袗�的機械性質探討", 粉體與粉末冶金會刊, 第43卷, 第4期, 269-281, 2018/11, ELSE1
  • "Microstructural Characteristics and Properties of Adding Vanadium Carbide Powders to Vanadis 4 Tool Steel through Vacuum Sintering and Heat Treatments", Materials Transactions, Vol. 59, No. 10, 1596-1602, 2018/10, SCI&EI
  • "Effect of Process Parameters on the Microstructure and Mechanical Properties of Vacuum Hot-Press Sintered Co-50 mass% Cr Alloys", Powder Metallurgy, Vol. 61, No. 4, 323-333, 2018/09, SCI&EI
  • "Enhancement of the Wear and Corrosion Resistance of DLC/oxynitriding Duplex-treated PM30 Steel by the Asymmetric Bipolar-pulsed Plasma Enhanced CVD", ISIJ International, Vol. 58, No. 8, 1510-1518, 2018/08, SCI&EI
  • "熱處理對添加VC 微粉之粉末工具鋼Vanadis 4其顯微組織和機械性質之研究", 金屬熱處理, 第137期, 40-47, 2018/06, ELSE1
  • "真空燒結及熱處理對添加Cr3C2微粉之Vanadis 4工具鋼其顯微組織和機械性質之研究", 粉體與粉末冶金會刊, 第43卷, 第2期, 69-75, 2018/05, ELSE1
  • "真空熱壓燒結製程對Co50Cr50合金之機械性質與腐蝕行為探討", 粉體與粉末冶金會刊, 第43卷, 第2期, 112-119, 2018/05, ELSE1
  • "非對稱性雙極脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理PM30粉末高速鋼之研究", 礦冶, Vol. 62, 241, 60-67, 2018/03, ELSE1
  • "Effect of the Mechanical Properties and Corrosion Behaviors of Nickel-Cadmium Duplex Electroplated AISI 4340 Steel by Using Various Solid Solution Treatments", Materials Transactions, Vol. 59, No. 3, 406-411, 2018/03, SCI&EI
  • "非平衡磁控濺鍍法沉積CrC與CrCN薄膜於氮氧化處理JIS SKD11工具鋼之研究", 金屬熱處理, 第135期, 53-62, 2017/12, ELSE1
  • "真空熱壓燒結壓力對Co-30 wt% Cr合金顯微組織與材料特性之研究", 礦冶, Vol. 61, 第240期, 89-95, 2017/12, ELSE1
  • "真空熱壓燒結製程對鈷鉻合金其顯微組織與材料特性之研究", 粉體與粉末冶金會刊, 第42卷, 第4期, 249-255, 2017/11, ELSE1
  • "Characteristics and properties of Ti-8Mo-6Cr alloys with added NbC powders through the vacuum sintering process at various temperatures", Materials Transactions, Vol. 58, No. 11, 1581-1586, 2017/11, SCI&EI
  • "Liquid phase sintering mechanism and densification behavior of boron-alloyed Fe-Ni-Mo-C-B powder metallurgy steel", Materials & Design, Vol. 133, 536-548, 2017/11, SCI&EI
  • "Investigation of vacuum hot-press sintering temperatures on the sintered characteristics of Cr-31.2 wt% Ti alloys,", Materials Transactions, Vol. 58, No. 8, 1190-1196, 2017/08, SCI&EI
  • "Microstructures, mechanical properties and corrosion behaviors of NbC added to Vanadis 4 tool steel via vacuum sintering and heat treatments", Vacuum, Vol. 142, 123-130, 2017/08, SCI&EI
  • "Microstructures and mechanical properties of TaC added to Vanadis 4 tool steel through vacuum sintering and heat treatments", ISIJ International, Vol. 57, No. 7, 1252-1260, 2017/07, SCI&EI
  • "Microstructure, mechanical properties and corrosion behavior of NbC modified AISI 440C stainless steel by vacuum sintering and heat treatments", Journal of Alloys and Compounds, Vol. 712, 760-767, 2017/07, SCI&EI
  • "熱處理對添加TaC微粉之VANADIS 4工具鋼其顯微組織和機械性質之研究", 金屬熱處理, 第133期, 50-56, 2017/06, ELSE1
  • "Investigation of the microstructures, mechanical properties and corrosion behaviours of Ti-8Mo-6Ni alloys adding NbC powders via vacuum sintering process", MATEC web of Conferences, Vol. 109, 1-6, 2017/05, EI
  • "Deposition of DLC Films onto Oxynitriding-treated V4E High Vanadium Tool Steel through DC-pulsed PECVD Process", Materials Transactions, Vol. 58, No.5, 806-812, 2017/05, SCI&EI
  • "電漿化學氣相沉積DLC薄膜在氮氧化處理V4E高釩工具鋼之研究", 礦冶, Vol. 61, 第237期, 54-61, 2017/03, ELSE1
  • "不同真空熱壓燒結溫度對Cr50Ti50合金的顯微組織與機械性質之影響探討", 粉體與粉末冶金會刊, 第42卷, 第1期, 15-21, 2017/02, ELSE1
  • "不同真空熱壓燒結製程溫度對Cr50Ti50合金其顯微組織與材料特性之影響", 礦冶, Vol. 60, 第230期, 75-82, 2016/12, ELSE1
  • "Improvement of the wear and corrosion behaviors of DLC/oxynitriding duplex-treated PM60 high-speed steel via various power densities of DC-pulsed plasma enhanced CVD", ISIJ International, Vol. 56, No. 12, 2276-2283, 2016/12, SCI&EI
  • "Study on the properties of WC-10Co alloys adding Cr3C2 powder via various vacuum sintering temperatures", Journal of Alloys and Compounds, Vol. 686, 810-815, 2016/11, SCI&EI
  • "添加碳化釩對P/M型鈦基複合材料顯微結構及機械性質之影響", 粉體與粉末冶金會刊, 第41卷, 第4期, 246-254, 2016/11, ELSE1
  • "Change in Microstructure, Mechanical Strength and Corrosion Resistance of Ti-8Mo-xNi Alloys through Various Sintering Temperatures", Materials Transactions, Vol. 57, No.8, 1363-1369, 2016/08, SCI&EI
  • "Cr50Cu50 alloys produced from submicron structured powders through hot pressing at different pressures", Powder Metallurgy, Vol. 59, No. 2, 142-147, 2016/06, SCI&EI
  • "Investigation of the Characteristics of Submicron Structured Powders Fabricated Cr50Ni50 Alloys via Different Hot-Press Sintering Pressurs", Materials Transactions, Vol. 57, No. 5, 732-737, 2016/05, SCI&EI
  • "真空熱壓燒結製程對Cr50Ni50合金之微結構、機械性質與腐蝕行為探討", 粉體與粉末冶金會刊, 第41卷, 第2期, 136-145, 2016/05, ELSE1
  • "利用直流脈衝電漿化學氣相沉積法於不同工作週期下蒸鍍DLC薄膜於氮氧化處理ASP60高速鋼之研究", 礦冶, Vol. 60, 第230期, 91-99, 2016/03, ELSE1
  • "熱處理對添加VC微粉之AISI 440C不�瓡�其顯微組織與機械性質之影響", 金屬熱處理, 第128期, 39-44, 2016/03, ELSE1
  • "不同熱壓壓力對熱壓燒結Cr50Ni50合金其顯微組織及機械性質之影響", 粉體及粉末冶金會刊, 第41卷, 第1期, 34-40, 2016/02, ELSE1
  • "Effects of Particle Size of Pre-Alloy Powders and Vacuum Sintering Temperatures on the Microstructure and Mechanical Properties of 440C Stainless Steel", ISIJ International, Vol. 56, No. 2, 335-340, 2016/02, SCI&EI
  • "真空燒結及熱處理對添加NbC和VC微粉之AISI 440C不�瓡�其顯微組織與機械性質之影響", 粉體及粉末冶金會刊, 第41卷, 第1期, 41-50, 2016/02, ELSE1
  • "Deposition of DLC/oxynitriding films onto JIS SKD11 steel by bipolar-pulsed PECVD", ISIJ International, Vol. 55, No. 12, 2631-2638, 2015/12, SCI&EI
  • "Study on the sintered characteristics and properties of nanostructured WC–15 wt% (Fe–Ni–Co) and WC–15 wt% Co hard metal alloys", Journal of Alloys and Compounds, Vol. 649, 89-95, 2015/12, SCI&EI
  • "不同真空熱壓燒結製程溫度對Cr50Ni50合金其顯微組織與材料特性之影響", 礦冶, Vol. 59, 第229期, 59-66, 2015/12, ELSE1
  • "Preparation and Sintering of Indium-Gallium-Zinc Oxide Ceramics with Different Zinc Oxide Contents", Journal of the European Ceramic Society, Vol. 35, 3893-3902, 2015/11, SCI&EI
  • "Strengthening of 440C Stainless Steel with TaC Powders via Vacuum Sintering and Heat Treatments on Microstructures and Mechanical Properties", Materials Transactions, Vol. 56, No. 9, 1585-1590, 2015/09, SCI&EI
  • "添加超微細奈米鉻粉對熱壓燒結Cr80Cu20合金顯微結構及機械性質之影響", 粉體及粉末冶金會刊, 第40卷, 第3期, 2015/08, ELSE1
  • "添加碳化物對真空燒結型鈦基合金顯微結構及機械性質之影響", 粉體及粉末冶金會刊, 第40卷, 第3期, 2015/08, ELSE1
  • "Investigation of Submicron Fabricated Cr50Cu50 Alloys Using Various Vacuum Hot-Press Sintering Temperatures", Materials Transactions, Vol. 56, No. 7, 1127-1132, 2015/07, SCI&EI
  • "不同工作週期對直流脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理JIS SKD11工具鋼之研究", 礦冶, Vol. 59, 第229期, 42-48, 2015/03, ELSE1
  • "Influence of Pre Deformation of 5052H112 Alloy on Tensile Properties and Fracture Resistance under Vibration", Materials Transactions, Vol. 56, No. 2, 236-241, 2015/02, SCI&EI
  • "Investigation of the characteristics of DLC films on oxynitriding-treated ASP23 high speed steel by", Surface and Coatings Technology, Vol. 261, 331-336, 2015/01, SCI&EI
  • "Study on the mechanical properties, microstructure and corrosion behaviors of nano-WC-Co-Ni-Fe hard materials through HIP and hot-press sintering processes", Materials Science & Engineering A, Vol. 618, 56-62, 2014/12, SCI&EI
  • "Optimizing the efficiency of anhydrous ethanol purification via regenerable molecular sieve", Applied Energy, Vol. 135, 483-489, 2014/12, SCI&EI
  • "真空熱壓燒結溫度對Cr50Cu50奈米合金靶材其微結構與電性之影響", 礦冶, Vol. 58, 第228期, 70-77, 2014/12, ELSE1
  • "真空熱壓燒結對Cr50Cu50合金之機械性質與腐蝕行為探討", 粉體及粉末冶金會刊, 第39卷, 第4期, 166-175, 2014/11, ELSE1
  • "The Effects of HIP, Solution Heat Treatmens and Aging Treatments on the Microstructure and Mechanical Properties of Sintering Cobalt-based Alloys Strengthened with Tantalum Carbide Additive", Materials Transactions, Vol. 55, No. 11, 1755-1761, 2014/11, SCI&EI
  • "Study on the Microstructure and Mechanical Properties of Cobalt-based Alloys Strengthened with Tantalum Carbide powder via Vacuum Sintering and HIP Treatments", Materials Transactions, Vol. 55, No. 10, 1623-1629, 2014/10, SCI&EI
  • "Investigation into the sintered behavior and properties of nanostructured WC-Co-Ni-Fe hard metal alloys", Materials Science and Engineering: A, Vol. 606, 150-156, 2014/06, SCI&EI
  • "Effects of Properties on S45C Carbon Steel by Electroless Ni-P Adding Al2O3 Powder of Composite Deposition and Various Heat Treatments", IOP Conference Series: Materials Science and Engineering (MSE), Vol. 58, 1-6, 2014/06, EI
  • "以不同時間之直流脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理ASP23高速鋼之研究", 礦冶, Vol. 58, No. 1, 132-138, 2014/03, ELSE1
  • "熱均壓及熱處理對鈷基合金添加碳化鉭微粉之燒結材料的性質影響與腐蝕行為探討", 粉體及粉末冶金會刊, Vol. 39, No. 1, 11-19, 2014/02, ELSE1
  • "Characterization and Properties of Sintered WC-Co and WC-Ni-Fe Hard Metal Alloys", Journal of Alloys and Compounds, Vol. 585, 407-413, 2014/02, SCI&EI
  • "Improvement of the tribological properties of DLC/oxynitriding duplex-treated AISI H13 alloy steel", ISIJ International, Vol. 54, No. 1, 193-198, 2014/01, SCI&EI
  • "Microstructure and mechanical properties of cobalt-based alloys strengthened with tantalum carbide powder via vacuum sintering and HIP treatments", Materials Transactions, 55, 10, 1623-1629, 2014/01, SCI
  • "真空燒結法對鈦銅鉬合金添加碳化鉭之顯微組織與強化機制探討", 礦冶, Vol. 57, No. 4, 78-83, 2013/12, ELSE1
  • "Characterization of the MC Carbides and Mechanical Properties in a TiC Particles Strengthened Cobalt-based Alloy through HIP, Solid-Solution and Aging Treatments", Materials Transactions, Vol. 54, No. 10, 2049-2054, 2013/10, SCI&EI
  • "Effects of Vacuum Sintering, HIP and HP Treatments on the Microstructure, Mechanical and Electrical Properties of Cr70Cu30 Alloys", Materials Transactions, Vol. 54, No. 9, 1857-1862, 2013/09, SCI&EI
  • "熱均壓製程對Ni-Cr燒結合金腐蝕性質和微結構之影響", 粉末冶金會刊, Vol. 38, No. 3, 144-153, 2013/08, ELSE1
  • "過共析銅含量對真空燒結型鈦銅鉬合金之微結構與機械性質之影響", 粉末冶金會刊, Vol. 38, No. 3, 162-170, 2013/08, ELSE1
  • "流體床麻淬火的冷卻速率對AISI H13工具鋼顯微結構和機械性質之影響", 金屬熱處理, 第117期, 25-34, 2013/06, ELSE1
  • "Improvement of Mechanical and Electrical Properties on the Sintered Ni-50 mass% Cr Alloys by HIP Treatment", Materials Transactions, Vol. 54, No. 6, 1034-1039, 2013/06, SCI&EI
  • "Electroless Ni-P plating and Heat Treatments on S45C Carbon Steel", IOP Conference Series: Materials Science and Engineering (MSE), Vol. 46, 1-6, 2013/06, EI
  • "Effects of MC Carbide Precipitates on the Microstructure and Mechanical Properties of Cobalt-Based Alloys Adding TiC Powder via Vacuum Sintering Process", Materials Transactions, Vol. 54, No. 3, 399-404, 2013/03, SCI&EI
  • "真空燒結與熱均壓處理對Ni65Cr35合金靶材微結構及其性質之影響", 礦冶, Vol. 57, No. 1, 62-68, 2013/03, ELSE1
  • "粉末冶金與熱均壓製程對Ni80Cr20合金靶材微結構及其電性之影響探討", 粉末冶金會刊, Vol. 38, No. 1, 13-19, 2013/02, ELSE1
  • "Improvement in Sintering Characteristics and Electrical Properties of Cr60Cu40 Alloy Targets by Hot Isostatic Pressing Treatment", Powder Metallurgy, Vol. 56, No. 1, 77-82, 2013/02, SCI&EI
  • "Effect of Particle Size and Vacuum Sintering Temperature on Phase Composition and Mechanical Properties of WC-12 wt% Co Hardmetals", Key Engineering Materials, Vol.531-532, 3-7, 2013/01, EI
  • "Study on the Microstructures, Electrical Resistance and Mechanical Properties of Chromium Target by Hot Pressing, Hot Isostatic Pressing and Canning-HIP Processes", International Journal of Refractory Metals and Hard Materials, Vol. 35, 70-75, 2012/12, SCI&EI
  • "脈衝電壓對電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理AISI H13工具鋼之影響", 礦冶, Vol. 56, No. 4, 117-122, 2012/12, ELSE1
  • "真空燒結與時效熱處理對於鈷基超合金微結構與機械性質之影響", 粉末冶金會刊, Vol. 37, No. 4, 236-243, 2012/11, ELSE1
  • "粉末燒結型亞共析鈦合金之顯微結構與機械性質分析", 粉末冶金會刊, Vol. 37, No. 4, 214-222, 2012/11, ELSE1
  • "後氧化製程對JIS SKD11工具鋼微結構及磨耗行為之影響", 金屬熱處理, 第114期, 33-41, 2012/09, ELSE1
  • "Study on the Sintered Behaviors and Electrical Properties of Cr50Cu50 Alloy Targets via Vacuum Sintering and HIP Treatments", Materials Transactions, Vol. 53, No. 9, 1689-1694, 2012/09, SCI&EI
  • "Study on the thermal erosion, wear and corrosion behaviors of TiAlN/Oxynitriding duplex-treated AISI H13 alloy steel", Surface and Coatings Technology, Vol. 207, 571-578, 2012/08, SCI&EI
  • "The Impact Toughness and Fracture Behavior of Ni-containing Powder Metal Steels", Advanced Materials Research, Vol. 538-541, 1594-1600, 2012/06, EI
  • "Effects of Thermal Erosion and Wear Resistance on AISI H13 Tool Steel", Materials Transactions, Vol. 53, No. 4, 745-751, 2012/04, SCI&EI
  • "AISI H13工具鋼氮氧化/TiAlN多重表面處理後熱熔損及磨耗性質之研究", 礦冶, Vol. 56, No. 1, 83-88, 2012/03, ELSE1
  • "不同持溫時間的氮氧化製程對JIS SKD11工具鋼微結構及機械性質之影響", 金屬熱處理, 第112期, 28-35, 2012/03, ELSE1
  • "Effects of Post-Oxidizing Treatment on Melting Loss and Corrosion Resistance of Gas Nitrided AISI H13 Tool Steel", ISIJ International, Vol. 52, No. 3, 499-504, 2012/03, SCI&EI
  • "The Effects of Adding TiC Powders to VANADIS 4 Tool Steel by HIP Treatment", Advanced Materials Research, Vol. 413, 426-431, 2012/02, EI
  • "Effects of Gamma' Precipitation on the Structure and Properties of 713LC Superalloy via HIP Treatment", Materials Transactions, Vol. 53, No. 2, 446-452, 2012/02, SCI&EI
  • "燒結溫度及熱均壓處理對超微細碳化鎢合金性質之影響探討", 粉末冶金會刊, Vol. 37, No. 1, 2-11, 2012/02, ELSE1
  • "Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP treated Alloy 718", Applied Mechanics and Materials, Vol. 117-119, 1315-1318, 2012/01, EI
  • "真空燒結與熱均壓製程對Cr50Cu50合金靶材微結構及其性質之影響", 礦冶, Vo. 55, No. 4, 22-26, 2011/12, ELSE1
  • "Effects of sintering process and heat treatments on microstructures and mechanical properties of VANADIS 4 tool steel added with TiC powders", Powder Metallurgy, Vol. 54, No. 4, 507-512, 2011/10, SCI&EI
  • "Enhancement of Thermal Cracking and Mechanical Properties of H13 Tool Steel by Shot Peening Treatment", Surface Engineering, Vol. 27, No. 8, 581-586, 2011/10, SCI&EI
  • "η相對G5碳化鎢材料在不同真空燒結溫度下顯微結構與機械性質之影響", 粉末冶金會刊, Vol. 36, No. 3, 182-190, 2011/08, ELSE1
  • "選擇適當的模材材料硬度-針對使用環境之不同來改變工具鋼硬度", 粉末冶金會刊, Vol. 36, No. 3, 165-169, 2011/08, ELSE1
  • "Effects of vacuum sintering temperature on mechanical properties and electric resistancefor Cr50–Si50 optical target", Powder Metallurgy, Vol. 54, No. 3, 325-330, 2011/07, SCI&EI
  • "真空燒結溫度對WC-12wt%Co微結構與性質之影響", 粉末冶金會刊, Vol. 36, No. 2, 100-107, 2011/05, ELSE1
  • "熱均壓與軋延退火製程對Cu-50 wt% Cr燒結合金顯微組織與機械性質之影響", 粉末冶金會刊, Vol. 36, No. 2, 75-83, 2011/05, ELSE1
  • "Effect of HIP temperature on microstructure and tensile properties of 713LC cast superalloy", International Journal of Cast Metals Research, Vol. 24, No. 2, 113-117, 2011/04, SCI
  • "熱均壓純鉻靶材之研究", 粉末冶金會刊, Vol. 36, No. 1, 22-28, 2011/02, ELSE1
  • "封罐熱均壓對純鉻靶材顯微組織與機械性質之研究", 粉末冶金會刊, 第35卷, 第4期, 246-254, 2010/11, ELSE1
  • "利用真空燒結法製備碳化鎢(12 wt% Co)超硬合金之研究", 粉末冶金會刊, 第35卷, 第4期, 272-280, 2010/11, ELSE1
  • "Effects of sintering Processes on composite tool steels containing self-synthesized TiC", ISIJ International, Vol. 50, No. 10, 1453-1459, 2010/10, SCI&EI
  • "Influence of γ˝ and δ Precipitations on the Microstructural Properties of 718 alloy through HIP, Solid-Solution, and different Aging Heat Treatments", Materials Transactions, Vol. 51, No. 9, 1683-1688, 2010/09, SCI&EI
  • "X-ray diffraction analysis on unburned carbon refined from fly ash", Journal of Raman Spectroscopy, Vol. 41, No. 9, 933-937, 2010/09, SCI&EI
  • "Effects of Microstructural evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment", Advanced Materials Research, Vol. 129-131, 1114-1118, 2010/08, EI
  • "選擇適當的模具材料-新鋼種對粉末冶金提出的挑戰", 粉末冶金會刊, 第35卷, 第3期, 193-196, 2010/08, ELSE1
  • "氮氧化製程對AISI H13模具鋼微結構及抗熔損之影響", 金屬熱處理, Vol. 2, 第105期, 29-37, 2010/06, ELSE1
  • "Improvement of Aluminum Erosion Behavior and Corrosion Resistance of AISI H13 Tool Steel by Oxidation Treatment", ISIJ International, Vol. 50, No. 4, 569-573, 2010/04, SCI&EI
  • "熱均壓TiC-420J2 複合鋼材之性質分析", 粉末冶金會刊, 34, 4, 3-7, 2009/11, ELSE1
  • "In Situ TEM Observation of γ´, γ˝ and δ Precipitations on Inconel 718 superalloy through HIP Treatment", Journal of Alloys and Compounds, 486, 2, 716-721, 2009/11, SCI&EI
  • "熱均壓封罐製程對Cr-Si濺鍍靶材性質之探討", 鑛冶, 53, 207, 39-45, 2009/09, ELSE1
  • "Multipeak fitting analysis of Raman spectra on DLCH film", Journal of Raman Spectroscopy, Vol. 40, No. 8, 1055-1059, 2009/08, SCI&EI
  • "利用原生TiC強化複合工具鋼製程研究", 粉末冶金會刊, 第34卷, 第3期, 68-77, 2009/08, ELSE1
  • "機械式球磨法對Cr50-Si50合金靶材微結構及電阻特性之研究", 粉末冶金會刊, 第34卷, 第2期, 97-106, 2009/05, ELSE1
  • "The Influence of Canning HIP Treatment on the Microstructure Characters of Cr35-Si65 and Cr50-Si50 Targets", Materials Transactions, Vol. 50, No. 4, 885-890, 2009/04, SCI&EI
  • "Optimization of Pressure and Soaking Time of HIP Treatment on 713LC Cast Superalloy", Materials Transactions, Vol. 50, No. 4, 909-916, 2009/04, SCI&EI
  • "Enhancement of erosion resistance on AISI H13 tool steel by Oxynitriding Treatment", ISIJ International, Vol. 49, No. 3, 421-424, 2009/03, SCI&EI
  • "真空燒結對Cr35-Si65與Cr50-Si50合金靶材機械性質及電阻特性之研究", 粉末冶金會刊, 第34卷, 第1期, 3-12, 2009/02, ELSE1
  • "真空燒結溫度對Cr-Si靶材微結構與性質之影響探討", 粉末冶金會刊, 第34卷, 第1期, 30-35, 2009/02, ELSE1
  • "Effects of the Temperature of Hot Isostatic Pressing treatment on Cr-Si Target", Ceramics International, Vol. 35, No. 2, 565-570, 2009/02, SCI&EI
  • "Effects of HIP Treatment on the Microstructure and Properties of Cr35-Si65 Target", Materials Transactions, Vol. 50, No. 2, 395-400, 2009/02, SCI&EI
  • "Microstructure and Mechanical Properties of 440C-TiC Composite Steels Produced through Powder Metallurgy Processing", ISIJ International, Vol. 48, No. 10, 1473-1477, 2008/10, SCI&EI
  • "AISI H13模具鋼材氮氧化研究", 鑛冶, Vol. 3, 52期, 103-106, 2008/09, ELSE1
  • "熱均壓時間對718超合金機械性質與微結構之影響探討", 金屬熱處理, Vol. 3, 第98期, 43-51, 2008/09, ELSE1
  • "熱均壓壓力對718超合金機械性質與微結構之影響探討", 金屬熱處理, Vol. 1, 第96期, 36-44, 2008/03, ELSE1
  • "Effect of Shot Peening Treatment on Forging Die Life", Materials Transactions, Vol. 49, No. 3, 619-623, 2008/03, SCI&EI
  • "Effects of Particle Size on Mechanical Properties of a TiC Containing Tool Steel by Hot Isostatic Press", Materials Transactions, Vol. 49, No. 3, 624-628, 2008/03, SCI&EI
  • "Effects of HIP Treatment on the Microstructure of Cr50-Si50 Target", Materials Transactions, Vol. 49, No. 2, 382-386, 2008/02, SCI&EI
  • "Powder Metallurgy Process and Physical-Mechanical Properties of Cr-Si alloy", Materials Science and Engineering of Powder Metallurgy, Vol. 12, No. 6, 374-379, 2007/12, EI
  • "以熱均壓法強化複合工具鋼之特性研究", 鑛冶, Vol. 4, 51期, 80-86, 2007/12, ELSE1
  • "Properties and Microstructure of Cr-Si target material manufactured by Hot Isostatic Press", Materials Science and Engineering of Powder Metallurgy, Vol. 12, No. 5, 277-283, 2007/10, EI
  • "氮氧化技術在壓鑄工業上之應用與發展", 鑄造科技, Vol. 9, 第216期, 20-24, 2007/09, ELSE1
  • "熱均壓溫度對718超合金機械性質與微結構之影響探討", 金屬熱處理, Vol. 3, 第94期, 22-30, 2007/09, ELSE1
  • "以熱均壓製備Cr-Si靶材及其性質之研究", 粉末冶金會刊, 第32卷, 第3期, 146-151, 2007/08, ELSE1
  • "以熱均壓製造TiC強化鉻釩工具鋼之機械性質研究", 粉末冶金會刊, 第32卷, 第3期, 185-190, 2007/08, ELSE1
  • "Cr-Si粉末冶金製程與其電阻特性之研究", 粉末冶金會刊, 第32卷, 第3期, 152-157, 2007/08, ELSE1
  • "熱均壓溫度對Cr-Si靶材影響之研究", 粉末冶金會刊, 第32卷, 第2期, 84-89, 2007/05, ELSE1
  • "440C不鏽鋼粉末添加不同比例之TiC微粉燒結後之性質探討", 粉末冶金會刊, 第32卷, 第1期, 40-48, 2007/02, ELSE1
  • "以真空燒結製備Cr-Si靶材之研究", 粉末冶金會刊, 第32卷, 第1期, 55-59, 2007/02, ELSE1
  • "Improvement the Microstructure and Tensile Properties of Inconel 718 Superalloy by HIP treatment", Materials Transactions, Vol. 47, No. 11, 2877-2881, 2006/11, SCI&EI
  • "Cr-Si靶材粉末冶金製程特性之研究", 粉末冶金會刊, 第31卷, 第3期, 168-174, 2006/08, ELSE1
  • "熱均壓處理對燒結440C不鏽鋼之影響", 金屬熱處理, Vol. 2, 第 89 期, 10-18, 2006/06, ELSE1
  • "Effects of the temperature of HIP process on the characteristics of Inconel 718 superalloy", International Journal of Cast Metals Research, Vol. 19, No. 3, 175-180, 2006/06, SCI
  • "Evaluation of the HIP pressure on Inconel 718 superalloy", International Journal of Cast Metals Research, Vol. 19, No. 3, 181-187, 2006/06, SCI
  • "Cr-Si靶材熱均壓製程特性及微結構之探討", 粉末冶金會刊, 第31卷, 第2期, 82-89, 2006/05, ELSE1
  • "熱均壓溫度對Cr-Si靶材之影響", 粉末冶金會刊, 第31卷, 第2期, 90-95, 2006/05, ELSE1
  • "Influences of Soaking Time in Hot Isostatic Pressing on Strength of Inconel 718 Superalloy", Materials Transactions, Vol. 47, No. 2, 426-432, 2006/02, SCI&EI
  • "添加碳化鈦微粉對不同粒徑之高釩工具鋼燒結性質之影響", 粉末冶金會刊, 第31卷, 第1期, 29-39, 2006/02, ELSE1
  • "熱均壓溫度對鑄造718 Superalloy拉伸性質之影響", 鑄造工程學刊, 第31卷, 第4期, 12-21, 2005/12, ELSE1
  • "熱均壓製程對Cr-Si靶材影響之研究", 金屬熱處理, Vol. 4, 第87期, 7-14, 2005/12, ELSE1
  • "表面珠擊在壓鑄模具之應用", 鑄造科技, Vol. 8, 第191期, 12-19, 2005/08, ELSE1
  • "以熱均壓法強化添加TiC燒結440C高鉻不鏽鋼之研究", 粉末冶金會刊, 第30卷, 第3期, 105-111, 2005/08, ELSE1
  • "熱均壓處理對添加碳化鈦微粉之高釩工具鋼性質之影響", 金屬熱處理, Vol. 3, 第85期, 13-23, 2005/06, ELSE1
  • "熱均壓製程壓力對Inconel 718鎳基超合金性質之影響", 粉末冶金會刊, 第30卷, 第1期, 81- 88, 2005/02, ELSE1
  • "熱均壓製程溫度對Inconel 718超合金性質之影響", 粉末冶金會刊, Vol. 29, 4, 279-287, 2004/11, ELSE1
  • "以珠擊法强化模具表面之研究", 金屬熱處理, Vol. 3, 第82期, 16-21, 2004/09, ELSE1
  • "均壓輔助燒結高釩工具鋼添加TiC微粉之研究", 粉末冶金會刊, 第29卷, 第3期, 156-164, 2004/08, ELSE1
  • "熱均壓技術之應用", 鑄造科技, Vol. 2, 177, 3-9, 2004/06, ELSE1
  • "以熱均壓處理強化添加TiC微粉之高釩工具鋼研究", 粉末冶金會刊, 第29卷, 第2期, 73-80, 2004/05, ELSE1
  • "雷射衝擊硬化與珠擊硬化法在工業應用之比較", 機械技術雜誌, Vol.4, 230, 144-152, 2004/04, ELSE1
  • "TiC強化高釩工具鋼之研究", 金屬熱處理, Vol. 2, 第77期, 23-28, 2003/06, ELSE1
  • "AISI H13工具鋼表面處理後之疲勞特性研究", 金屬熱處理, Vol. 4, 第75期, 9-12, 2002/12, ELSE1
  • "AISI H13工具鋼表面處理後之熱熔損研究", 金屬熱處理, Vol .4, 第75期, 13-17, 2002/12, ELSE1
  • "熱均壓強化之完全緻密型粉末冶金零件", 粉末冶金會刊, 第27卷, 第4期, 261-270, 2002/11, ELSE1

專章著作

  • Recent Trends in Nanotechnology and Materials Science / Improving the Surface Hardness and Wear Resistance of S45C Carbon Steel via Various Heat Treatments and pH values of Electroless Ni-P Deposition., 1, Springer-Verlag, ISBN 978-3-319-04515-3, 2014/06/01

研討會論文

  • "熱處理對添加Ta40Nb60C及Ta40Nb60C-VC微粉之Corrax不�瓡�其顯微組織演化與機械性質之影響", 台灣金屬熱處理學會2024年年會, 臺北, 2024/12/07
  • "真空燒結法對添加鎳微粉之鈦鈮鉬中熵合金的顯微組織與機械性質之影響", 台灣金屬熱處理學會2024年年會, 臺北, 2024/12/07
  • "溫軋加工及退火對添加合金元素粉末於SUS420製備中熵合金的顯微組織及性質之研究", 台灣金屬熱處理學會2024年年會, 臺北, 2024/12/07
  • "鈦鉭鉬基中熵合金添加銅鎳微粉的顯微組織與性質之探討", 台灣金屬熱處理學會2024年年會, 臺北, 2024/12/07
  • "以直流磁控濺鍍法沉積CrSiN鍍層於氧氮化處理Unimax工具鋼之磨耗特性和機械性質研究", 中華民國礦冶工程學會2024年年會, 臺南, 2024/10/19
  • "真空熱壓燒結製程對鈷鉬鎳合金其顯微組織與材料特性之影響", 中華民國礦冶工程學會2024年年會, 臺南, 2024/10/19
  • "以真空燒結、熱均壓及深冷和熱處理等多重製程製備添加X碳化鉻與(X-Y-Z)碳化鉻Y碳化鉭Z碳化鈦微粉之Vanadis 23高速鋼複合材料的性質探討", 2024年模具暨應用產業技術論文發表會, 臺北, 2024/08/22
  • "真空燒結和熱處理對添加Ta50Nb50C及Ta50Nb50C-B4C微粉於Vanadis 60高速鋼其顯微組織和機械性質之影響", 台灣金屬熱處理學會2023年年會, 高雄, 2023/12/09
  • "真空燒結法對鈦鉬錳合金的顯微組織與機械性質之研究", 台灣金屬熱處理學會2023年年會, 高雄, 2023/12/09
  • "Investigation of adding NbC-TaC powders to PM23 high-speed steel by vacuum sintering and HIP treatment", The 6th International Conference on Powder Metallurgy in Asia, Gyeongju, 2023/11/27
  • "Study on the microstructures and properties of 440C steel bonded TiC Cermets combined with Ni、Mo and WC Additions", The 6th International Conference on Powder Metallurgy in Asia, Gyeongju, 2023/11/27
  • "Improving the mechanical properties of 316L PM compacts through alloy design", The 6th International Conference on Powder Metallurgy in Asia, Gyeongju, 2023/11/27
  • "利用直流磁控濺鍍法製備CrN鍍層於氧氮化處理的Vanadis 23高速鋼之磨耗行為研究", 中華民國礦冶工程學會2023年年會, 臺中, 2023/10/13
  • "真空熱壓燒結製程對鈷鉬鎳合金其顯微組織與材料特性之影響", 中華民國礦冶工程學會2023年年會, 臺中, 2023/10/13
  • "熱處理對添加HfC及HfC-Ta60Nb40C微粉之Vanadis 60高速鋼其機械性質與顯微組織之影響", 台灣金屬熱處理學會2022年年會, 花蓮, 2022/12/10
  • "真空燒結法對鈦鈮錳合金的顯微組織與機械性質之研究", 台灣金屬熱處理學會2022年年會, 花蓮, 2022/12/10
  • "粉末冶金製備鈦鉭錳合金添加碳化鎢微粉的顯微組織與強化機制之研究", 台灣金屬熱處理學會2022年年會, 花蓮, 2022/12/10
  • "Post-necking phenomena of solid solution treated Dual phase PHSS", 中國材料科學學會2022年年會, 苗栗, 2022/11/18
  • "利用直流磁控濺鍍法製備CrN鍍層於氧氮化處理的Vanadis 23高速鋼之磨耗行為研究", 中華民國礦冶工程學會2022年年會, 台北, 2022/10/14
  • "真空熱壓燒結製程對鎳鉻鉬合金其顯微組織與材料特性之影響", 中華民國礦冶工程學會2022年年會, 台北, 2022/10/14
  • "SUS630不鏽鋼添加TiC複合材料之真空燒結組織與機械性質之研究", 中華民國礦冶工程學會2022年年會, 台北, 2022/10/14
  • "利用真空燒結、熱均壓、深冷及熱處理等製程製備添加X碳化鋯和(X-Y)碳化鋯Y碳化鈦粉末之V4 Extra工具鋼複合材料之性質研究", 2022年模具暨應用產業技術論文發表會, 台北, 2022/08/25
  • "熱處理對添加Cr3C2及Cr3C2-TaC-TiC微粉之Vanadis 23高速鋼其機械性質與顯微組織之影響", 台灣金屬熱處理學會2021年年會, 台北, 2021/12/04
  • "真空燒結法對鈦鈮鈷合金的顯微組織與強化機制之研究", 台灣金屬熱處理學會2021年年會, 台北, 2021/12/04
  • "粉末冶金及熱處理製備鈦鈮及鈦鉭合金之顯微組織與機械性質之研究", 台灣金屬熱處理學會2021年年會, 台北, 2021/12/04
  • "利用直流磁控濺鍍法製備CrN鍍層於氧氮化處理Dievar工具鋼之性質研究", 中華民國礦冶工程學會2021年年會, 高雄, 2021/10/21
  • "真空熱壓燒結製程對鉻鈷鎳合金其顯微組織與機械性質之影響", 中華民國礦冶工程學會2021年年會, 高雄, 2021/10/21
  • "熱處理對添加NbC及NbC-TaC微粉之PM 23高速鋼其機械性質與顯微組織之影響", 台灣金屬熱處理學會2020年年會, 高雄, 2020/12/12
  • "真空燒結法對鈦銅鈮合金的顯微組織與強化機制之研究", 台灣金屬熱處理學會2020年年會, 高雄, 2020/12/12
  • "真空燒結熱處理製備鈦鉭鎳合金的微觀組織與強化機制探討", 台灣金屬熱處理學會2020年年會, 高雄, 2020/12/12
  • "利用直流磁控濺鍍法製備CrN鍍層於氧氮化處理的Vanadis 8工具鋼之性質研究", 中華民國礦冶工程學會2020年年會, 苗栗, 2020/10/23
  • "真空熱壓燒結溫度對鎳鉬合金顯微組織與材料特性之研究", 中華民國礦冶工程學會2020年年會, 苗栗, 2020/10/23
  • "處理對添加ZrC及ZrC-TiC微粉之Vanadis 4 Extra工具鋼其機械性質與顯微組織之影響", 台灣金屬熱處理學會2019年年會, 臺灣臺中, 2019/12/07
  • "真空燒結法製備添加TiB2微粉之鈦鉭鎳合金的微觀組織與強化機制探討", 台灣金屬熱處理學會2019年年會, 臺灣臺中, 2019/12/07
  • "真空燒結法製備添加Mo2C微粉之鈦鉭鎳合金的微觀組織與強化機制探討", 台灣金屬熱處理學會2019年年會, 臺灣臺中, 2019/12/07
  • "真空燒結法製備MIM SUS-316L不�瓡�添加碳化鉭微粉之顯微結構及機械性質之研究", 台灣金屬熱處理學會2019年年會, 臺灣臺中, 2019/12/07
  • "利用直流脈衝電漿輔助化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理Vanadis 10工具鋼之性質研究", 中華民國礦冶工程學會2019年年會, 台南, 2019/11/19
  • "真空熱壓燒結溫度對鈷鉻鉬鈮合金顯微組織與材料特性之研究", 中華民國礦冶工程學會2019年年會, 台南, 2019/11/19
  • "以真空燒結、熱均壓、深冷及熱處理等製程製備添加VC和Cr3C2粉末之V4工具鋼複合材料之性質研究", 2019年海峽兩岸粉體及粉末冶金技術研討會, 海南島博鰲, 2019/10/16
  • "真空燒結法製備鈦鉭合金添加鐵、鎳微粉之微觀組織及強化機制", 2019年海峽兩岸粉體及粉末冶金技術研討會, 海南島博鰲, 2019/10/16
  • "以真空燒結、熱均壓、深冷及熱處理等製程製備添加VC和Cr3C2粉末之V4工具鋼複合材料之性質研究", 108年粉體及粉末冶金技術研討會, 高雄, 2019/08/30
  • "真空燒結法製備鈦鉭合金添加鐵、鎳微粉之微觀組織及強化機制", 108年粉體及粉末冶金技術研討會, 高雄, 2019/08/30
  • "熱處理對添加TaC微粉於Vanadis 4 Extra工具鋼其顯微組織和機械性質之研究", 臺灣金屬熱處理學會2018年年, 台北, 2018/12/08
  • "利用真空燒結法探討鈦鉭合金的微觀組織與強化機制", 臺灣金屬熱處理學會2018年年, 台北, 2018/12/08
  • "以直流脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理Vanadis 8工具鋼之特性研究", 中華民國礦冶工程學會2018年年會, 台北, 2018/10/20
  • "真空熱壓燒結壓力對Cr-60 wt% Si合金顯微組織與材料特性之研究", 中華民國礦冶工程學會2018年年會, 台北, 2018/10/20
  • "利用非平衡磁控濺鍍法蒸鍍CrC與CrN薄膜於氮氧化處理V4E高釩工具鋼之研究", 臺灣金屬熱處理學會2017年年會, 台南, 2017/12/09
  • "真空燒結法對鈦鉬鈷合金之微觀組織與強化機制探討", 臺灣金屬熱處理學會2017年年會, 台南, 2017/12/09
  • "熱處理對添加VC微粉之Vanadis 4工具鋼其顯微組織和機械性質之研究", 臺灣金屬熱處理學會2017年年會, 台南, 2017/12/09
  • "非對稱性雙極脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理PM30粉末高速鋼", 中華民國礦冶工程學會2017年年會, 苗栗, 2017/10/19
  • "真空熱壓燒結壓力對Co-30 wt% Cr合金顯微組織與材料特性之研", 中華民國礦冶工程學會2017年年會, 苗栗, 2017/10/19
  • "Investigation of the microstructures, mechanical properties and corrosion behaviours of Ti-8Mo-6Ni alloys adding NbC powders via vacuum sintering process", 2st International Conference on Materials Science and Nanotechnology, ICMSNT 2017, 奧克蘭, 2017/04/19
  • "添加碳化釩對P/M型鈦基複合材料顯微結構及機械性質之影響", 2017年海峽兩岸粉末冶金技術研討會, 新竹, 2017/04/09
  • "Effects of adding NbC powders to AISI 440C tool steel by vacuum sintering and HIP treatments", The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
  • "Study on the properties of WC-Ni-Fe hard metal alloys by vacuum sintering and HIP treatments", The 4th International Conference on Powder Metallurgy in Asia, 新竹, 2017/04/09
  • "熱處理對添加TaC微粉之VANADIS 4工具鋼其顯微組織和機械性質之研究", 臺灣金屬熱處理學會2016年年會, 臺灣台北, 2016/12/03
  • "真空燒結法對鈦鉬鉻合金之微觀組織與強化機制探討", 臺灣金屬熱處理學會2016年年會, 台北, 2016/12/03
  • "增感劑Dy3+對CaXMgSi2O5+X:Eu3+,(X=1,2,3)燒結特性的影響探討", 臺灣金屬熱處理學會2016年年會, 台北, 2016/12/03
  • "不同真空熱壓燒結製程溫度對Cr50Ti50合金其顯微組織與材料特性之影響", 中華民國礦冶工程學會2016年年會, 高雄, 2016/11/10
  • "以電漿化學氣相沉積DLC薄膜在氮氧化處理V4E高釩工具鋼之研究", 中華民國礦冶工程學會2016年年會, 高雄, 2016/11/10
  • "添加碳化釩對P/M型鈦基複合材料顯微結構及機械性質之影響", 105年粉體及粉末冶金研討會, 新竹, 2016/08/26
  • "熱處理對添加VC微粉之AISI 440C不�瓡�其顯微組織與機械性質之影響", 臺灣金屬熱處理學會2015年年會, 台中, 2015/12/05
  • "真空燒結法對鈦鎳鉬合金的微觀組織與強化機制探討", 臺灣金屬熱處理學會2015年年會, 台中, 2015/12/05
  • "以直流脈衝電漿化學氣相沉積法於不同工作週期下蒸鍍DLC薄膜於氮氧化處理ASP60高速鋼之研究", 中華民國礦冶工程學會2015年年會, 高雄, 2015/10/22
  • "不同真空熱壓燒結製程溫度對Cr50Ni50合金其顯微組織與材料特性之影響", 中華民國礦冶工程學會2015年年會, 高雄, 2015/10/22
  • "Effects of carbide additives on the microstructures and mechanical properties of vacuum sintering Ti-based alloy", 2015海峽兩岸粉末冶金研討會, 中國武漢, 2015/09/09
  • "Effects of hot-pressed sintering on the microstructure and mechanical properties of Cr80Cu20 alloys via added extra-fine nanostructured Cr powders", 2015海峽兩岸粉末冶金研討會, 中國武漢, 2015/09/09
  • "添加碳化物對真空燒結型鈦基合金顯微結構及機械性質之影響", 104年粉體及粉末冶金研討會, 台中, 2015/08/28
  • "添加超微細奈米Cr粉對熱壓燒結Cr80Cu20合金顯微結構及機械性質之影響", 104年粉體及粉末冶金研討會, 台中, 2015/08/28
  • "熱均壓製程對具不同黏結相的奈米碳化鎢合金其機械性質與顯微結構之研究", 台灣金屬熱處理學會2014年年會, 高雄, 2014/12/06
  • "熱處理對於TaC強化AISI 440C不�瓡�其微觀組織與機械性質之影響", 台灣金屬熱處理學會2014年年會, 高雄, 2014/12/06
  • "不同真空熱壓燒結溫度對Cr50Cu50奈米合金靶材其微結構與電性之影響", 中華民國礦冶工程學會2014年年會, 台北, 2014/10/16
  • "不同工作週期對直流脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理JIS SKD11工具鋼之研究", 中華民國礦冶工程學會2014年年會, 台北, 2014/10/16
  • "Effects of Properties on S45C Carbon Steel by Electroless Ni-P Adding Al2O3 Powder of Composite Deposition and Various Heat Treatments", 2014 International Conference on Manufacturing, Optimization, Industrial and MaterialEngineering (MOIME 2014), 雅加達, 2014/03/29
  • "真空燒結製程對奈米碳化鎢超硬合金燒結性質與顯微結構之研究", 台灣金屬熱處理學會2013年年會, 台北, 2013/11/30
  • "真空燒結對於TaC強化鈷基超合金微觀組織與機械性質之影響", 台灣金屬熱處理學會2013年年會, 台北, 2013/11/30
  • "熱均壓製程對Ni-Cr燒結合金腐蝕性質和微結構之影響", 2013年海峽兩岸粉末冶金技術研討會, 廈門, 2013/11/03
  • "過共析銅含量對真空燒結型鈦銅鉬合金之微結構與機械性質之影響", 2013年海峽兩岸粉末冶金技術研討會, 廈門, 2013/11/03
  • "Effect of hypereutectoid copper contents on the microstructures and mechanical properties of vacuum sintered Ti-Cu-Mo alloy", 2nd International Conference Powder Metallurgy in AISA (APMA 2013), Xiamen, 2013/11/03
  • "Effects of Hot Isostatic Pressing Process on the Corrosion Properties and Microstructures of Ni-Cr Sintered Alloy", 2nd International Conference Powder Metallurgy in AISA (APMA 2013), Xiamen, 2013/11/03
  • "真空燒結法對鈦銅鉬合金添加碳化鉭之顯微組織與強化機制探討", 中華民國礦冶工程學會2013年年會, 苗栗, 2013/10/25
  • "以不同時間之直流脈衝電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理ASP23高速鋼之研究", 中華民國礦冶工程學會2013年年會, 苗栗, 2013/10/25
  • "熱均壓製程對Ni-Cr燒結合金腐蝕性質和微結構之影響", 中華民國粉末冶金學會2013年年會, 台南, 2013/08/23
  • "過共析銅含量對真空燒結型鈦銅鉬合金之微結構與機械性質之影響", 中華民國粉末冶金學會2013年年會, 台南, 2013/08/23
  • "Electroless Ni-P plating and Heat Treatments on S45C Carbon Steel", 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering, Bandung, 2013/03/09
  • "大型模具利用流體床麻淬火熱處理之微結構與機械性質探討", 台灣金屬熱處理學會2012年年會, 台中, 2012/12/08
  • "以真空燒結法改善鎳鐵基及鈷基碳化鎢合金微結構與機械性質之研究", 台灣金屬熱處理學會2012年年會, 台中, 2012/12/08
  • "Effect of Particle Size and Vacuum Sintering Temperature on Phase Composition and Mechanical Properties of WC-12 wt% Co Hardmetals", 2012 International Conference on Materials Science and Nanotechnology, Guangzhou, 2012/11/16
  • "真空燒結與熱均壓處理對Ni65Cr35合金靶材微結構及其性質之影響", 中華民國礦冶工程學會2012年年會, 高雄, 2012/11/02
  • "脈衝電壓對電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理AISI H13工具鋼之影響", 中華民國礦冶工程學會2012年年會, 高雄, 2012/11/02
  • "真空燒結與時效熱處理對於鈷基超合金微結構與機械性質之影響", 中華民國粉末冶金學會2012年年會, 台南, 2012/08/24
  • "粉末燒結型亞共析鈦合金之顯微結構與機械性質分析", 中華民國粉末冶金學會2012年年會, 台南, 2012/08/24
  • "The Impact Toughness and Fracture Behavior of Ni-containing Powder Metal Steels", The 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), Zhuhai, 2012/07/06
  • "The Effects of Adding TiC Powders to VANADIS 4 Tool Steel by HIP Treatment", The 2nd International Conference on Materials Science and Engineering Applications (ICMSEA 2012), Xi'an, 2012/01/07
  • "熱處理對不同製程之AISI H13鑄造工具鋼的影響探討", 台灣金屬熱處理學會2011年年會, 台北, 2011/12/10
  • "熱處理對於不同鑄造方式之AISI 420不鏽鋼微結構與機械性質影響", 台灣金屬熱處理學會2011年年會, 台北, 2011/12/10
  • "AISI H13工具鋼氮氧化/TiAlN多重表面處理後熱熔損及磨耗性質之研究", 中華民國鑛冶工程學會2011年年會, 台北, 2011/11/25
  • "真空燒結與熱均壓製程對Cr50Cu50合金靶材微結構及其性質之影響", 中華民國鑛冶工程學會2011年年會, 台北, 2011/11/25
  • "Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP treated Alloy 718", 2011 International Conference on Applied Mechanics, Materials and Manufacturing, Shenzhen, 2011/11/18
  • "Choosing the Suitable Tooling Material Hardness - Changing the Hardness for Applications", 2011年海峽兩岸粉末冶金技術研討會, 廣州, 2011/08/26
  • "Effect of η phase on the Microstructure and Mechanical Properties of G5 Tungsten Carbide Material by different Vacuum Sintering Temperature", 2011年海峽兩岸粉末冶金技術研討會, 廣州, 2011/08/26
  • "η相對G5碳化鎢材料在不同真空燒結溫度下顯微結構與機械性質之影響", 中華民國粉末冶金學會2011年年會, 南投, 2011/08/19
  • "選擇適當的模材材料硬度-針對使用環境之不同來改變工具鋼硬度", 中華民國粉末冶金學會2011年年會, 南投, 2011/08/19
  • "熱處理對S45C中碳鋼無電鍍鎳磷鍍層之機械性質影響探討", 金屬熱處理學會2010年年會, 台南, 2010/12/11
  • "氮氧化製程溫度對SKD11工具鋼機械性質與顯微結構之影響", 金屬熱處理學會2010年年會, 台南, 2010/12/11
  • "熱均壓純鉻靶材之研究", 中國材料科學學會2010年年會, 高雄, 2010/11/19
  • "多重表面處理對壓鑄用AISI H13工具鋼抗熔損及耐磨耗影響之研究", 中國材料科學學會2010年年會, 高雄, 2010/11/19
  • "真空燒結溫度對WC-12wt%Co微結構與性質之影響", 中國材料科學學會2010年年會, 高雄, 2010/11/19
  • "Effects of Microstructural evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment", 2010 International Conference on Material and Manufacturing Technology, Chongqing, 2010/09/17
  • "選擇適當的模具材料-新鋼種對粉末冶金提出的挑戰", 中華民國粉末冶金學會2010年年會, 台南, 2010/08/20
  • "時效熱處理對熱均壓718超合金顯微結構及機械性質之研究", 金屬熱處理學會2009年年會, 台北, 2009/12/12
  • "氮氧化處理對AISI H13工具鋼熱熔損與腐蝕性質之研究", 金屬熱處理學會2009年年會, 台北, 2009/12/12
  • "熱處理對熱均壓Inconel 718超合金之顯微結構及機械性質研究", 中國材料科學學會2009年年會, 花蓮, 2009/11/26
  • "後氧化處理對AISI H13工具鋼之熱熔損與腐蝕行為研究", 中國材料科學學會2009年年會, 花蓮, 2009/11/26
  • "利用原生TiC強化複合工具鋼製程研究", 2009年海峽兩岸粉末冶金技術研討會, 台中, 2009/08/28
  • "Strengthening of Composite Tool Steels by Self-Synthesized TiC", 17th International Conference Composites/Nano Engineering, Hawaii, 2009/07/26
  • "氮氧化處理對H13工具鋼表面性質之影響", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "XPS C1s Spectra Peak Decomposition Procedure on DLCH Film", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "真空燒結溫度對Cr-Si靶材微結構與性質之影響探討", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "熱均壓TiC-420J2 複合鋼材之性質分析", 中國材料科學學會2008年年會, 台北, 2008/11/21
  • "熱均壓封罐製程對Cr-Si濺鍍靶材性質之探討", 中華民國鑛冶工程學會2008年年會, 台北, 2008/10/23
  • "Mechanical Properties of TiC-Strengthened Cr/V Containing Tool Steels", 9th International Conference on Hot Isostatic Pressing, California, 2008/05/06
  • "以熱均壓法強化複合工具鋼之特性研究", 中國材料科學學會2007年年會, 新竹, 2007/11/16
  • "以熱均壓法強化複合工具鋼之特性研究", 中國材料科學學會2007年年會, 新竹, 2007/11/16
  • "氮氧化處理對AISI H13模具鋼耐熱熔損之研究", 中華民國礦冶工程學會2007年年會, 高雄, 2007/10/26
  • "Cr-Si粉末冶金製程與其電阻特性之研究", 2007年海峽兩岸粉末冶金技術研討會, 北京, 2007/09/09
  • "以熱均壓製備Cr-Si靶材及其特性之研究", 2007年海峽兩岸粉末冶金技術研討會, 北京, 2007/09/09
  • "以熱均壓製造TiC強化鉻釩工具鋼之機械性質研究", 2007年海峽兩岸粉末冶金技術研討會, 北京, 2007/09/09
  • "以熱均壓製備Cr-Si靶材及其性質之研究", 中華民國粉末冶金學會2007年年會, 宜蘭, 2007/08/24
  • "Cr-Si粉末冶金製程與其電阻特性之研究", 中華民國粉末冶金學會2007年年會, 宜蘭, 2007/08/24
  • "以熱均壓製造TiC強化鉻釩工具鋼之機械性質研究", 中華民國粉末冶金學會2007年年會, 宜蘭, 2007/08/24
  • "Inconel 713LC超合金熱均壓製程參數及特性之研究", 台灣金屬熱處理學會2006年年會, 台南, 2006/12/16
  • "熱均壓製程對Cr-Si靶材孔隙及微量雜質影響之研究", 中國材料科學學會2006年年會, 台南, 2006/11/25
  • "熱均壓製程對鑄造超合金Inconel 713LC顯微組織與機械性質影響之研究", 中國材料科學學會2006年年會, 台南, 2006/11/25
  • "以真空燒結製備Cr-Si靶材之研究", 中國材料科學學會2006年年會, 台南, 2006/11/25
  • "440C高鉻不?袗?添加TiC微粉以熱均壓法燒結處理之研究", 中國材料科學學會2006年年會, 台南, 2006/11/25
  • "Cr-Si靶材粉末冶金製程特性之研究", 中華民國粉末冶金學會2006年年會, 台北, 2006/08/18
  • "熱均壓製程時間參數對鑄造超合金Inconel 718 之機械性質影響", 中國材料科學學會2005年年會, 台北, 2005/11/25
  • "熱均壓溫度對Cr-Si靶材影響之研究", 中國材料科學學會2005年年會, 台北, 2005/11/25
  • "以熱均壓法強化添加TiC燒結440C高鉻不?袗?之研究", 2005年海峽兩岸粉末冶金技術研討會, 南投, 2005/08/26
  • "均壓輔助燒結高釩工具鋼添加TiC微粉之研究", 2004年海峽兩岸粉末冶金技術研討會, 湖南長沙, 2004/09/05
  • "以熱均壓處理強化添加TiC微粉之高釩工具鋼", 中華民國陶業學會2004年學術論文集, 台北, 2004/05/15

相關證照

  • 冶金工程技師, 考試院專門職業技術人員高等考試
  • 冶金工程技師, 經濟部工業局
  • (86)熱處理技術士檢定監評委員, 行政院勞工委員會
回頁首