按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

李春穎教授Chun-Ying Lee

現職:
臺北科大/製造科技研究所
聯絡方式:

期刊論文

  • "Deep-eutectic solution with threonine additive associating with supercritical carbon dioxide to enhance zinc electroplating characteristics", Materials Today Communications, 38, 107941, 2024/03, SCI
  • "Study on the fastening property of precision locknut under simulated dynamic impact loading with consideration of interference factors", Journal of Mechanics, 20, 1, 19-30, 2024/01, SCI
  • "5 MW風機葉片於不同風速之流固耦合模擬及結構設計分析", 應用聲學與振動學刊, 15, 1, 1-10, 2023/12, EI
  • "Design and noise-reduction simulation of an acoustic metamaterial plate incorporating tunable shape memory cantilever absorbers", Journal of Vibroengineering, 24, 4, 793-805, 2022/06, EI
  • "An Experimental Study on the Torsional Stiffness and Limit Torque of a Jaw Coupling with Consideration of Spacer’s Hardness and Installation Methods", Journal of Mechanics, 38, 195-203, 2022/05, SCI
  • "The effect of heat treatment on the corrosion resistance of iron-based amorphous alloy coatings prepared by high velocity oxygen fuel method", Materials, 14, 7818, 2021/12, SCI
  • "A Study on Corrosion and Corrosion-Wear Behavior of Fe-based Amorphous Alloy Coating Prepared by High Velocity Oxygen Fuel Method", Journal of Materials Research and Technology, 15, 4880-4895, 2021/11, SCI
  • "Identifying Individuals with Mild Cognitive Impairment using Working Memory Induced Intra-Subject Variability of Resting-State EEGs", Frontiers in Computational Neuroscience, 15, 700467, 2021/08, SCI
  • "MCI Detection using Kernel Eigen-Relative-Power Features of EEG Signals", Actuators in Robotic Control, 10, 152, 2021/07, SCI
  • "Improvement prediction on the dynamic performance of epoxy composite used in packaging by using nano-particle reinforcements in addition to 2-hydroxyethyl methacrylate toughener", Materials, 14, 4193, 2021/07, SCI
  • "Corrosion of High- Velocity-Oxygen-Fuel (HVOF) Sprayed Non-crystalline Alloy Coating in Marine Environment", Surface and Coatings Technology, 409, 126896, 2021/02, SCI
  • "The study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying", Journal of Alloys and Compounds, 867, 159132, 2021/02, SCI
  • "A Two-way Linear Piezoelectric Vibratory Conveyor Actuated by a Composite Sinusoidal Voltage Input", Journal of Vibroengineering, 2021/01, SCI
  • "The Influences of Corrosion on the Tightening and Anti-loosening Properties of a Flank-Locking Precision Locknut", Journal of Mechanics, 37, 44-52, 2020/12, SCI
  • "The Influence of Corrosion on the Anti-loosening Performance of a Precision Locknut Subjected to Rotation and Periodic Impact", Journal of Mechanics, 36, 3, 295-303, 2020/06, SCI
  • "Corrosion and Biocompatibility Behavior of the Micro-Arc Oxidized AZ31B Alloy in Simulated Body Fluid", International Journal of Electrochemical Science, 15, 6, 6405-6424, 2020/06, SCI
  • "The use of surfactants and supercritical CO2 assisted processes in the electroless nickel plating of printed circuit board with blind via", Materials Chemistry and Physics, 241, 122418, 2019/12, SCI
  • "電極表面形貌對電流變液扭矩耦合器的傳動影響", 精密機械與製造期刊, 9, 2, 1-10, 2019/11, ELSE1
  • "Influence of hydraulic domain on vibration control and overload prediction of high-speed punching press: multi-domain modelling and experiment", Shock and Vibration, 2019, 8547104, 2019/10, SCI
  • "A Study on the Corrosion and Wear Behavior of Nanocrystalline Ni-Mo Electrodeposited Coatings", Surface & Coatings Technology, 366, 1, 286-295, 2019/03, SCI
  • "Controllable Preload Spindle with a Piezoelectric Actuator for Machine Tools", International Journal of Machine Tools and Manufacture, 139, 60-63, 2019/01, SCI
  • "The influence of forced-air cooling on a 3D printed PLA part manufactured by fused filament fabrication", Additive Manufacturing, 25, 1, 196-203, 2019/01, ELSE2
  • "The Effect of Immersion Corrosion on the Surface Morphology of a Flank-locking Precision Locknut", Experimental Techniques, 2019/01, SCI
  • "Study on the Contact Performance of Electronic EON Connectors under Axial Vibration", IEEE Transactions on Components, Packaging and Manufacturing Technology, 8, 12, 2090-2097, 2018/12, SCI
  • "Interval Type-2 Fuzzy Vibration Control of Multiple-degree-of-freedom Structure Using Shape-memory-material Absorber", Sensors and Materials, 30, 11, 2455-2467, 2018/11, SCI
  • "DOE-FEM Based Design Improvement to Minimize Thermal Errors of a High Speed Spindle System", Thermal Science and Engineering Progress, 8, 525-536, 2018/11, SCI
  • "Dynamic Simulation of a Metamaterial Beam Consisting of Tunable Shape Memory Material Absorbers", Vibration, 1, 81-92, 2018/07, ELSE2
  • "The Influences of Monoethanolamine Additive on the Properties of Nickel Coating Electroplated in Post Supercritical Carbon Dioxide Mixed Watts Bath", Surface and Coatings Technology, 337, 1, 323-340, 2018/01, SCI
  • "Optimization on the performance of a precision flank-locking locknut considering the machining and operational parameters", Journal of Mechanics, doi.org/10.1017/jmec, 2017/09, SCI
  • "Vibration Control Design for a Plate Structure with Electrorheological ATVA Using Interval Type-2 Fuzzy System", Applied Sciences, 7, 7, 707, 2017/07, SCI
  • "Nickel Electroplating in Post Supercritical CO2 Mixed Watts Bath under Different Agitations", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 11, 7, 1187-1193, 2017/07, ELSE2
  • "Discharge Performance of Zinc Coating Prepared by Pulse Electroplating with Different Frequencies for Application in Zinc-Air Battery", Surface and Coatings Technology, 319, 378-385, 2017/04, SCI
  • "Incorporating Piezoelectric Energy Harvester in Tunable Vibration Absorber for Application in Multi-modal Vibration Reduction of A Platform Structure", Journal of Sound and Vibration, 389, 1, 73-88, 2017/01, SCI
  • "Development of a Real-time Measurement Device for Monitoring the Internal Stress during Electroplating", Experimental Techniques, 41, 1, 51-57, 2017/01, SCI
  • "Investigation on the Corrosion Resistance of Trivalent Chromium Conversion Passivate on Electroplated Zn-Ni Alloy", Surface and Coating Technology, 305, 241-248, 2016/08, SCI
  • "Vibration control of a structure using a shape memory material absorber based on fuzzy system", Applied System Innovation, 971-975, 2016/03, EI
  • "The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9, 7, 1281-1284, 2015/08, ELSE2
  • "Design and Implementation of Tunable Multi-DOF Vibration Absorber Made of Hybrid Shape Memory Helical Springs", Journal of Intelligent Material Systems and Structures, DOI: 10.1177/1045389, 2015/07, SCI
  • "Experimental Application of a Vibration Absorber in Structural Vibration Reduction Using Tunable Fluid Mass Driven by Micropump", Journal of Sound and Vibration, 348, 1, 31-40, 2015/06, SCI&EI
  • "Fabrication of Ni-Mn Micro-Probe Structure with Low Internal Stress and High Hardness by Employing DC Electrodeposition", Advances in Materials Science and Engineering, 2014, 890814, 2014/04, SCI
  • "鋁陽極氧化處理膜對氟離子之耐腐蝕研析", 科學與工程技術期刊, 10, 1, 27-34, 2014/03, ELSE1
  • "System Identification and Semi-active Control of a Squeeze-mode Magneto-rheological Damper", IEEE/ASME Trans. Mechatronics, 18, 6, 1691-1701, 2013/12, SCI
  • "Mn-Doped Zn2SiO4 Thin Film with Green Fluorescence Enhanced by Ag Nano-Island Surface Plasmon Effect", Japanese Journal of Applied Physics, 52, 11NJ03, 2013/11, SCI
  • "HER Catalytic Activity of Electrodeposited Ni-P Nanowires under the Influence of Magnetic Field", Journal of Nanomaterials, 2013, 191728, 2013/10, SCI
  • "Investigation of a piezoelectric valveless micropump with an integrated stainless steel diffuser/nozzle bulge-piece design", Smart Materials and Structures, 22, 8, 085023, 2013/07, SCI
  • "An Electroplating Technique using the Post Supercritical Carbon Dioxide Mixed Electrolyte", Surface & Coatings Technology, 232, 234-239, 2013/05, SCI
  • "Effect of Annealing Temperature on the Mechanical Properties and the Spherical Indentation of NiTi Shape Memory Alloy", Lecture Notes in Electrical Engineering, 234, 1, 765-772, 2013/05, EI
  • "Structural Vibration Control Using a Tunable Hybrid Shape Memory Material Vibration Absorber", Journal of Intelligent Material System and Structure, 23, 15, 1725-1734, 2012/10, SCI
  • "The relationship between nano crystallite structure and internal stress in Ni electrodeposited films plated by the supercritical CO2 method", Journal of The Electrochemical Society, 159, 6, D393-D399, 2012/04, SCI
  • "電鍍鎳鎢合金之腐蝕與磨耗行為研究", 防蝕工程, 26, 1, 1-8, 2012/04, ELSE1
  • "Theoretical and Experimental Design of a New Flexible Hinged Positioning Stage", Journal of Chinese Society of Mechanical Engineers, 33, 1, 59-66, 2012/04, SCI
  • "電鍍鎳/鎳磷合金複合層之微機電製程研究", 科學與工程技術期刊, 8, 1, 45-50, 2012/03, ELSE1
  • "Study on the internal stress of nickel coating electrodeposited in an electrolyte mixed with supercritical carbon dioxide", Surface & Coating Technology, 206, 14, 3201-3207, 2012/03, SCI
  • "Synergy between Corrosion and Wear of Electrodeposited Ni-P Coating in NaCl Solution", Tribology International, 44, 12, 1603-1609, 2011/10, SCI
  • "Design Methodology for the Minimization of Contact Width between Pressure Lip Seal and Shaft", Journal of Chinese Society of Mechanical Engineers, 32, 5, 51-60, 2011/10, SCI
  • "Analyzing mechanical properties of a nanocrystalline Fe-Ni coating by nanoindentation", Journal of Material Research, 26, 19, 2533-2542, 2011/09, SCI
  • "CFD-based Optimization of a Diamond-Obstacles Inserted Micromixer with Boundary Protrusions", Engineering Applications of Computational Fluid Mechanics, 5, 2, 210-222, 2011/06, SCI
  • "The Electrocatalytic Activity of Electrodeposited Ni-P Micro-patterned Structure in Acidic Solution", Journal of Chinese Society of Mechanical Engineers, 32, 2, 103-109, 2011/04, SCI
  • "Wear and Corrosion Investigation on the Electrodeposited Ni-P Coating", Tribology Transactions, 54, 4, 497-504, 2011/04, SCI
  • "A Novel Inflatable Belt-Type Clamp in Open Heart Surgery", Journal of Mechanics, 27, 1, 57-62, 2011/03, SCI
  • "電解沉積製備具有多段材質之奈米金屬線", 科學與工程期刊, 6, 3, 9-14, 2010/09, ELSE1
  • "Study of the Corrosion Behavior of Nanocrystalline Ni-P Electrodeposited Coating", Metallurgy and Materials Transaction A, 41A, 2, 451-459, 2010/02, SCI
  • "Study on the electrodeposition of Ni-P nanowires and their electrocatalytic properties", Metallurgy and Materials Transaction A, 41A, 2, 768-774, 2010/02, SCI
  • "Internal Stress Control of Nickel-Phosphorus Electrodeposits using Pulse Currents", Journal of The Electrochemical Society, 157, 3, D154-D158, 2010/02, SCI
  • "Effect of impact velocity on the indentation of thick composite laminate", Experimental Techniques, 33, 4, 59-64, 2009/07, SCI
  • "Lateral vibration of a composite stepped beam consisted of SMA helical spring based on equivalent Euler-Bernoulli beam theory", Journal of Sound and Vibration, 324, 1-2, 179-193, 2009/07, SCI
  • "Wear and Immersion Corrosion of Ni-P Electrodeposit in NaCl Solution", Tribology International, doi:10.1016, 2009/07, SCI
  • "鎳磷合金奈米晶粒電鍍層之腐蝕行為研究", 防蝕工程, 23, 2, 103-110, 2009/06, ELSE1
  • "電解沉積製備鎳奈米線及其磁性研究", 台北科技大學學報, 41, 2, 23-29, 2008/12, ELSE1
  • "Localized electrochemical deposition process improvement by using different anodes and deposition directions", Journal of Micromechanics and Microengineering, 18, 10, 105008, 2008/09, SCI

研討會論文

  • "Intelligent Acoustic Metamaterial Plate Using Double-Cantilever Vibration Absorbers Made of Shape Memory Alloy Wire", The 20th International Conference on Automation Technology (Automation 2023), Taipei, 2023/12/08
  • "深共熔溶劑添加蘇胺酸混合超臨界二氧化碳製備電鍍鋅之性質研究", 中國機械工程學會第四十屆全國學術研討會, 彰化縣彰化市, 2023/12/01
  • "PLI-Based Connectivity in Resting-EEG is a Robust and Generalizable Feature for Detecting MCI and AD: A Validation on a Diverse Multisite Clinical Dataset", 45th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Sydney, 2023/07/24
  • "Vibration Characteristics of a Tunable Metamaterial Plate Incorporating Shape Memory Alloy Absorbers with U-Shaped Cantilever", International Conference on Mechanical, Materials and Renewable Energy, Reykjavík, 2023/07/02
  • "5 MW風機葉片於不同風速之流固耦合模擬及結構設計分析", 第三十屆中華民國振動與噪音工程學術研討會, Taipei, 2023/06/17
  • "大電流電源連接器端子接觸特性的CAE分析與探討", 第21屆精密機械與製造科技研討會論文集-PMMT 2023, 屏東墾丁, 2023/05/19
  • "The Use of Supercritical CO2 in the Electroplating of Nickel Coating for its Performance Improvement", The 6th International Conference on Precision Machinery and Manufacturing Technology, Kenting, Pintung, 2021/05/21
  • "具有3D拉脹單元之結構在補強設計方面的CAE分析與探討", 第19屆精密機械與製造科技研討會, Kenting, Pintung, 2021/05/21
  • "霍普金森桿應用於鋁箔高應變率拉伸之研究", 中國機械工程學會第三十七屆全國學術研討會, 雲林縣虎尾鎮, 2020/11/20
  • "以懸臂型形狀記憶合金吸振器組成可調式聲學超穎平板之設計與減噪模擬研究", 第23屆全國機構與機器設計學術研討會, 台南市, 2020/11/13
  • "可雙向輸送之直線式壓電驅動振動輸送機開發", 第23屆全國機構與機器設計學術研討會, 台南市, 2020/11/13
  • "應用形狀記憶合金之自動綁鞋帶產品設計開發", 第18屆精密機械與製造科技研討會, 墾丁屏東, 2020/05/23
  • "高頻背板連接器之母端訊號完整性分析與改善", 中國機械工程學會第三十六屆全國學術研討會, 台北市, 2019/12/06
  • "電鍍參數與糖精對超臨界二氧化碳混合深共熔溶劑電鍍鎳的性質研究", 中國機械工程學會第三十六屆全國學術研討會, 台北市, 2019/12/06
  • "直線式壓電振動輸送機之簧片固定邊界非 線性影響研究", 中華民國力學學會年會暨第43 屆全國力學會議, 台中市, 2019/11/29
  • "Finite Element Analysis of an Acoustic Metamaterial Plate Incorporating Tunable Shape Memory Cantilever Absorbers", 10th Asian pacific Conference on Aerospace Technology and Science & The 4th Asian Joint Symposium on Aerospace Engineering, 新竹市, 2019/08/28
  • "Design and Simulation of an Acoustic Metamaterial Plate Incorporating Tunable Shape Memory Cantilever Absorbers", 47th International Summer School-Conference “Advanced Problems in Mechanics –2019”, St. Petersburg, 2019/06/24
  • "電極表面形貌對電流變液扭矩耦合器的傳動影響", 第17屆精密機械與製造科技研討會, 墾丁屏東, 2019/05/24
  • "CAE Analysis on the Mechanical Properties of a 3D-Printed Lattice Structure from Ti-6Al-4V for Biomedical Applications", 15th International Conference of Computational Methods in Science and Engineering, Rhodes Island, 2019/05/01
  • "超臨界製程與表面活性劑對化鍍鎳磷薄膜 與 PCB 盲孔析鍍之影響", 中國機械工程學會第三十五屆全國學術研討會, 嘉義民雄, 2018/11/30
  • "3D 列印週期性單元結構之機械性質有限元素模擬分析", 中華民國力學學會年會暨第42 屆全國力學會議, 台北市大安區, 2018/11/23
  • "應用壓電致動器的智慧化工具機主軸預壓力設計研究", 中華民國力學學會年會暨第42 屆全國力學會議, 台北市大安區, 2018/11/23
  • "Dynamic Analysis on a Metamaterial Beam Consisted of Tunable Shape Memory Alloy Absorbers", 2nd International Conference on Research, Innovation and Commercialization (ICRIC-2018), Zagreb, 2018/07/16
  • "風扇冷卻對3D FDM列印模型之機械性質影響研究", 第 16 屆精密機械與製造科技研討會論文集-PMMT 2018, 墾丁屏東, 2018/05/18
  • "A Tuned Vibration Absorber Constituted of Shape Memory Alloy Wires for Vibration Reduction of Platform Structures: Design and Implementation", ICPMMT 2018 - The 3rd International Conference on Precision Machinery and Manufacturing Technology, 奧克蘭, 2018/02/04
  • "由振動激發電子連接器之壓接魚眼端子微動磨耗失效研究", 中國機械工程學會第三十四屆全國學術研討會, 台中市, 2017/12/01
  • "以添加單乙醇胺之後超臨界二氧化碳混合瓦茲浴製備電鍍鎳的製程研究", 中國機械工程學會第三十四屆全國學術研討會, 台中市, 2017/12/01
  • "智慧型超穎材料樑結構之建模與動態特性分析", CSMMT 2017第20屆全國機構與機器設計學術研討會, 彰化縣彰化市, 2017/11/17
  • "Nickel Electroplating in Post Supercritical CO2 Mixed Watts Bath under Different Agitations", ICMAME 2017: 19th International Conference on Mechanical, Aeronautical and Manufacturing Engineering, 巴塞隆納, 2017/07/28
  • "運用模流分析於10吋濾水器濾瓶之射出成型設計", 2017精密機械與製造科技研討會, 墾丁屏東, 2017/05/19
  • "以不同電鍍製程製備鋅鍍層用於鋅空氣電池之性能探討", 中國機械工程學會第三十三屆全國學術研討會, 新竹市, 2016/12/03
  • "包埋毛細管修復樹脂之自我修復型複合材料", 中國機械工程學會第三十三屆全國學術研討會, 新竹市, 2016/12/03
  • "利用微編織紗製成三維熱塑性複合材料之機械性質探討", 中國機械工程學會第三十三屆全國學術研討會, 新竹市, 2016/12/03
  • "Photoluminescence of ZnO Film Prepared by Annealing Zn Coating Electrodeposited in Post-Supercritical CO2 Mixed Sulfate Bath", Proceedings of 2016 ICENS-Summer, Kyoto, 2016/07/12
  • "Development of a FEM-based Thermal Model for a High Speed Spindle System", Proceedings of 2016 ICENS-Summer, Kyoto, 2016/07/12
  • "Study of Vibration Control Using a Tunable Vibration Absorber Made of Hybrid Shape Mem¬ory Helical Springs", Proceedings of 2016 ICENS-Summer, Kyoto, 2016/07/12
  • "可調式能量擷取吸振器於結構平台多模態減振之研究", 2016中華民國振動噪音學術研討會, 高雄市, 2016/06/25
  • "電鍍內應力即時量測裝置的研發", 中國機械工程學會第三十二屆全國學術研討會, 高雄, 2015/12/11
  • "後超臨界二氧化碳硫酸浴輔助電鍍鋅經退火製備氧化鋅之特性探討", 中國機械工程學會第三十二屆全國學術研討會, 高雄, 2015/12/11
  • "Advanced Driving Assistant System (ADAS) based on Kalman Filter for Heavy Fog Condition", 9th IPS-International Collaboration Symposium on Information, Production and Systems, Kitakyushu, 2015/11/16
  • "A Device for Measuring the Internal Stress Evolution during Electroplating", Proceedings of the 9th IPS-International Collaboration Symposium on Information, Production and Systems, Kitakyushu, 2015/11/16
  • "管材端末塑性成形有限元素分析及製程改善", 第20屆車輛工程學術研討會, 彰化縣大村, 2015/11/13
  • "The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress", ICMAAE 2015: 17th International Conference on Mechanical, Aeronautical and Automotive Engineering, Paris, 2015/07/20
  • "以調控形狀記憶合金線軸向力之可調式振動吸振器設計及結構減振應用", 第二十三屆中華民國振動與噪音工程學術研討會, 新北市, 2015/06/27
  • "形狀記憶合金於智能保暖衣上的應用", 2015 International Conference on Communication, Health, Beauty and Innovation Education, 彰化市, 2015/05/12
  • "直流電鍍鎳錳合金退火處理之機械性質", 中國機械工程學會第三十一屆全國學術研討會, 台中市, 2014/12/06
  • "超音波輔助後超臨界二氧化碳電鍍鎳之影響探討", 中國機械工程學會第三十一屆全國學術研討會, 台中市, 2014/12/06
  • "超臨界二氧化碳混合硫酸浴電鍍鋅之抗腐蝕性探討", 2014 ERAC 能源與冷凍空調學術研討會, 臺北市, 2014/10/04
  • "The Effects of NaF Concentration on the Zinc Coating Electroplated in Supercritical CO2 Mixed Zinc Chloride Bath", ICMSMM 2014: International Conference on Materials Science, Metals and Manufacturing, Prague, 2014/07/10
  • "以微泵浦傳輸流體控制質量之吸振器設計及結構減振研究", 第二十二屆中華民國振動與噪音工程學術研討會, 彰化市, 2014/06/07
  • "高頻感應焊接應用於SMA連接器本體之製程參數探討", 2014年精密機械與製造科技研討會, 屏東墾丁, 2014/05/23
  • "氟化鈉濃度對超臨界二氧化碳混合氯化鋅浴電鍍鋅之探討", 中國機械工程學會第三十屆全國學術研討會論文集, 宜蘭, 2013/12/06
  • "瓦特浴電鍍鎳鎢磷合金及其鍍層之機械性質研究", 2013全國精密製造研討會, 臺北市, 2013/11/22
  • "多自由度智慧型材料螺旋彈簧吸振器用於機器結構減振之研究", 第十六屆全國機構與機器設計學術研討會, 新竹市, 2013/11/01
  • "以低電流密度製備低內應力之鎳錳合金電鍍層研究", 中國材料科學學會年會, 桃園中壢, 2013/10/18
  • "Current Density Effect on Nickel Electroplating Using Post Supercritical CO2 Mixed Watts Electrolyte", ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Stockholm, 2013/07/15
  • "Vibration Control of a Cantilever Beam Using a Tunable Vibration Absorber Embedded with ER Fluids", ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Stockholm, 2013/07/15
  • "利用基因演算法最佳化雷射光機台剛性提升", 第二十一屆中華民國振動與噪音工程學術研討會, 臺北市, 2013/06/29
  • "智慧型材料製作多自由度可調變吸振器之設計與結構減震研究", 第二十一屆中華民國振動與噪音工程學術研討會, 臺北市, 2013/06/29
  • "Mn-doped Zn2SiO4/Ag nano-islands for green fluorescence thin film enhanced by surface plasmon effect", ISPlasma 2013, Nagoya, 2013/01/28
  • "Annealing effect on the microstructure and optical characteristics of Mn, Si co-doped ZnO thin film sputtered on quartz glass", ISPlasma 2013, Nagoya, 2013/01/28
  • "Effect of Annealing Temperature on the Mechanical Properties and the Spherical Indentation of NiTi Shape Memory Alloy", 1st International Conference on Intelligent Technologies and Engineering Systems, 彰化市, 2012/12/13
  • "利用超臨界二氧化碳輔助之TEOS疏水鍍層製作", 中國機械工程學會第二十九屆全國學術研討會, 高雄市, 2012/12/07
  • "直流電鍍鎳錳合金之微結構與機械性質", 中國機械工程學會第二十九屆全國學術研討會, 高雄市, 2012/12/07
  • "脈衝電源對超臨界二氧化碳電鍍鎳之影響", 中國機械工程學會第二十九屆全國學術研討會, 高雄市, 2012/12/07
  • "應用振動特徵於機車車架之結構健康監測研究", 第17屆車輛工程學術研討會, 南投縣草屯鎮, 2012/11/09
  • "Feasibility of using post supercritical CO2 mixed electrolyte for nano-crystalline nickel electrodeposition", The Third International Conference on Sensor Device Technologies and Applications, 羅馬, 2012/08/19
  • "超臨界電鍍銅製程之奈米鍍層內應力與導電性探討", 2011奈米技術與材料研討會, 彰化縣大村鄉, 2011/12/16
  • "Effect of electroplating parameters and additives on the internal stress of Ni deposits plated in supercritical CO2 method", Annual International Conference on Materials Science, Metal & Manufacturing, Singapore, 2011/12/12
  • "鎳鈦合金之表面壓痕研究", 中國機械工程學會學術研討會, 台中市, 2011/11/23
  • "氟分子對鋁陽極處理耐腐蝕研析", 中國機械工程學會學術研討會, 台中市, 2011/11/23
  • "結構應力法應用於機車車架疲勞分析之研究", 第16屆車輛工程研討會, 台北市, 2011/11/11
  • "大型液態儲槽結構有限元素之焊縫可靠度分析", 2011 International Symposium of Quality Management, 彰化縣大村鄉, 2011/11/05
  • "電流密度與界面活性劑對超臨界電鍍奈米鎳鍍層之影響探討", 第15屆全國奈米工程暨微系統技術研討會, 台北市, 2011/09/06
  • "電鍍鎳/鎳磷合金複合層之微機電製程研究", 100年度防蝕工程年會暨論文發表會, 新北市, 2011/08/18
  • "Development of a Novel SMA-Tuned Micromixer", 3rd Conference on Ferromagnetic Shape Memory Alloys, Dresden, 2011/07/18
  • "可調變混成形狀記憶材料吸振器用於結構之減振控制", 第十九屆中華民國振動與噪音工程學術研討會, 彰化縣大村鄉, 2011/06/25
  • "混成形狀記憶材料之可調變式吸震器", 中國機械工程學會第二十七屆全國學術研討會論文集, 台北市, 2010/12/10
  • "界面活性劑對超臨界二氧化碳電鍍鎳之影響", 中國機械工程學會第二十七屆全國學術研討會, 台北市, 2010/12/10
  • "形狀記憶合金驅動之全自動機車側腳架研究", 中國機械工程學會第二十七屆全國學術研討會, 台北市, 2010/12/10
  • "電鍍鎳鎢合金之腐蝕與磨耗行為研究", 中國材料科學學會2010年會, 台南市, 2010/11/19
  • "Mechanical Behavior of A SMA Helical Spring with Two-Way Shape Memory Effect", 2010 Conference on Precision Machinery and Manufacturing Technology, 屏東墾丁, 2010/05/21
  • "局部電化學沉積之微銅柱製程電場模擬", 2010 精密機械與製造科技研討會, 屏東墾丁, 2010/05/21
  • "The HER property of electrodeposited Ni-P electrode with micro-patterned structure", 2010 International Conference on Optics, Photonics and Energy Engineering, 武漢, 2010/05/10
  • "電化學製備氧化鋅和氧化亞銅其結構與光學性質研究", 中國材料科學學會2009年會, 花蓮縣壽豐鄉, 2009/11/26
  • "以田口法電鍍鎳磷條件對電催化活性影響", 中國機械工程學會第二十六屆全國學術研討會, 台南市, 2009/11/20
  • "道路鋼板防撞護欄立柱的有限元素分析", 第十四屆車輛工程學術研討會, 雲林縣虎尾, 2009/10/30
  • "電鍍鎳磷合金腐蝕與磨耗交互作用", 98年度防蝕工程年會暨論文發表會, 台中, 2009/08/28
  • "Vibration Tuning of A Platform Suspended by Hybrid Shape-Memory Helical Springs", The 16th International Congress on Sound and Vibration, 克拉科, 2009/07/05
  • "混成形狀記憶螺旋彈簧用於半主動懸吊平台減振之研究", 第十七屆中華民國振動與噪音工程學術研討會, 台北市, 2009/06/06
  • "局部電化學沉積之銅微柱製程及陣列結構製作研究", 2009精密機械與製造科技研討會, 墾丁, 2009/05/22
  • "電解沉積奈米鎳磷合金及電催化性能研究", 中國機械工程學會第二十五屆全國學術研討會, 彰化縣, 2008/11/21
  • "脈衝電鍍鎳磷合金在鹽水溶液之腐蝕磨耗行為", 中國機械工程學會第二十五屆全國學術研討會, 彰化縣, 2008/11/21
  • "電解沉積製備鎳奈米線及其磁性研究", 中國材料科學學會2008年會, 台北市, 2008/11/21
  • "鎳磷合金奈米晶粒電鍍層之腐蝕行為研究", 第六屆海峽兩岸材料腐蝕與防護研討會, 花蓮, 2008/11/09
  • "越野沙灘車車架之舒適度改善設計", 第十三屆車輛工程學術研討會, 台北縣, 2008/10/31

相關證照

  • 機械製圖, 內政部
  • 機械高考技師, 考試院
回頁首