按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

陳文斌教授Weng-Pin Chen

現職:
臺北科大/製造科技研究所
聯絡方式:
網站連結:

期刊論文

  • "Forcefully engaging rods into tulips with gap discrepancy leading to pedicle screw loosening—a biomechanical analysis using long porcine spine segments", The Spine Journal, 2024/03, SCI
  • "Influence of various pilot hole profiles on pedicle screw fixation strength in minimally invasive and traditional spinal surgery: a comparative biomechanical study", Frontiers in bioengineering and biotechnology, 2024/02, SCI
  • "Dopamine-dependendent functions of hyaluronic acid/dopamine/silk fibroin hydrogels that highly enhance N-acety-L-cysteine (NAC) delivered from nasal cavity to brain tissue through a near-infrared photothermal effect on the NAC-loaded hydrogels", Biomaterials Advances, 154, 213615, 2023/09, SCI
  • "Finite element analysis of optimized novel additively manufactured non-articulating prostheses for cervical total disc replacement", Frontiers in bioengineering and biotechnology, 2023/06, SCI
  • "Biomechanical evaluation of pedicle screw stability after 360-degree turnback from full insertion: effects of screw shape, pilot hole profile and bone density", Frontiers in bioengineering and biotechnology, 2023/05, SCI
  • "Biomechanical evaluation of position and bicortical fixation of naterior lateral vertebral screws in a porcine model", Scientific reports, 13, 454, 2023/01, SCI
  • "Biomechanical comparison of pedicle screw fixation strength among three different screw trajectories using single vertebrae and one-level functional spinal unit", Frontiers in bioengineering and biotechnology, 2022/12, SCI
  • "Biomechanical comparison of vertebroplasty, kyphoplasty, vertebrae stent for osteoporotic vertebral compression fractures-a finite element analysis", Applied sciences, 11, 5764, 2021/06, SCI
  • "Roles of Silk Fibroin on Characteristics of Hyaluronic Acid/Silk Fibroin Hydrogels for Tissue Engineering of Nucleus Pulposus", Materials, 13, 12, 2750-2768, 2020/07, SCI
  • "Developing a silk fibroin composite film to scavenge and probe H2O2 associated with UV-excitable blue fluorenscence", Sensors, 20, 366-384, 2020/01, SCI
  • "Biomechanical behavior of cavity design on teeth restored using ceramic inlays: An approach based on three-dimensional finite element analysis and ultrahigh-speed camera", Acta Biomaterialia, 2019/05, SCI
  • "Treatment of thoracolumbar burst fractures by short-segment pedicle screw fixation using a combination of two additional pedicle screws and vertebroplasty at the level of the fracture: a finite element analysis", BMC Musculoskeletal Disorders, 18, 262, 2017/06, SCI
  • "Effects of collagen crosslink augmentation on mechanism of compressive load sharing in intervertebral discs", Journal of Medical and Biological Engineering, 2017/01, SCI
  • "The Effects of Collagen Crosslink Augmentation on the Mechanism of Compressive Load Sharing in the Intervertebral Disc", Journal of Medical and Biological Engineering, 2016/06, SCI&EI
  • "Exogenous Crosslinking Restores Intradiscal Pressure of Injured Porcine Intervertebral Discs An In Vivo Examination Using Quantitative Discomanometry", Spine, 40, 20, 1572-1577, 2015/10, SCI
  • "The biomechanical effects of cement augmentation and partial vertebral height restoration on the load transfer change of adjacent vertebrae in vertebroplasty", Journal of Mechanics in Medicine and Biolog, 15, 3, p. 1550025-1~17, 2014/09, SCI
  • "Stress Distribution within the Plantar Aponeurosis During Walking - a Dynamic Finite Element Analysis", Journal of Mechanics in Medicine and Biology, 14, 4, 1450053-1~17, 2014/04, SCI
  • "Finite Element Analysis of Cervical Spine with Different Constrained Types of Total Disc Replacement", Journal of Mechanics in Medicine and Biology, 14, 3, 1450038-1~13, 2014/02, SCI
  • "Mechanical properties of temporary anchorage device", Journal of Dental Sciences, 2014/01, SCI
  • "Changes in windlass effect in response to different shoe and insole designs during walking", Gait and Posture, 37, 2, 235-241, 2013/12, SCI
  • "A novel dental implant abutment with micro-motion capability-Development and biomechanical evaluations", Dental Materials, 2013/11, SCI
  • "Limitations of push-out test in bond strength measurement", Journal of Endodontics, 39, 2, 283-287, 2013/02, SCI
  • "Changes in winlass effect in response to different shoe and insole designs during walking", Gait & Posture, 36, 4, 2012/08, SCI
  • "Effects of thread depth, taper shape, and taper length on the mechanical properties of mini-implants", American Journal of Orthodontics and Dentofacial Orthopedics, 141, 3, 279-288, 2012/03, SCI
  • "Determination of the augmentation effects of hyaluronic acid on different heel structures in amuputated lower limbs of diabetic patients using ultrasound elastography", Ultrasound in Med. & Biol., 28, 6, 943-952, 2012/02, SCI
  • "Biomechanical optimization of different fixation modes for a proximal femoral L-osteotomy", BMC Musculoskeletal Disorders, 10, 112, 10, 2009/09, SCI
  • "Biomechanical comparison of lumbar spine instability between laminectomy and bilateral laminotomy for spinal stenosis syndrome – an experimental study in porcine model.", BMC Musculoskeletal Disorders, 9, x, 84, 2008/06, SCI
  • "Biomechanical Comparison of a new stand-alone anterior lumbar interbody fusion cage with established fixation technique – a three-dimensional finite element analysis", BMC Musculoskeletal Disorders, 9, x, 88, 2008/06, SCI
  • "The number of screws, bone quality, and friction coefficient affect acetabular cup stability.", Medical Engineering & Physics, 29, x, 1089-1095, 2007/11, SCI
  • "Effect of different walking speed on plantar pressure during heel strike to mid-stance phase – 3D dynamic finite element analysis.", Journal of Biomechanics, 39, x, s54, 2006/06, SCI
  • "Finite element analysis of four different lumbar interbody fusion cage designs", Journal of Biomechanics, 39, x, s523, 2006/06, SCI
  • "Biomechanical evaluation of using iliac bone or rib bone graft in anterior T12-L1 interbody fusion and effect of triangulation of the anterior fixation screws.", Journal of Biomechanics, 39, x, s54, 2006/06, SCI
  • "The effect of necrotic lesion size and rotational osteotomy for femoral head osteonecrosis – a three-dimensional finite element simulation.", Clinical Biomechanics, 21, 9, 969-976, 2006/05, SCI
  • "Effects of Screw Fixation on the Acetabular Cup.", Journal of Medical and Biological Engineering, 26, 3, 143-148, 2006/05, EI
  • "錐體成形體中不同骨水泥容量及位置的生物力學評估", 中華骨科創傷雜誌, 7, 10, 7-10, 2005/10, ELSE2
  • "Biomechanical comparison of newly designed stemless prosthesis and conventional hip prosthesis - an experimental study", Bio-medical Materials and Engineering, 15, 3, 239-249, 2005/06, SCI
  • "Enhancing growth human endothelial cells on Arg-Gly-Asp (RGD) embedded poly ( -caprolactone) (PCL) surface with nanometer scale of surface disturbance", Journal of Biomedical Materials Research Part A, 72A, 2, 213-219, 2005/06, SCI
  • "Biomechanical evaluation of different bone cement volumes and locations in vertebroplasty", Chin J Orthop Trauma, 7, 10, 903-907, 2005/06, ELSE2
  • "Effects of various periodontal ligament elastic moduli on the stress distribution of a central incisor and surrounding alveolar bone.", Journal of the Formosan Medical Association, 104, 11, 830-838, 2005/06, SCI
  • "Three-dimensional finite element modeling of a maxillary two-rooted premolar: stress analysis with and without modeling of periodontium", Chinese Dental Journal, 24, 1, 35-43, 2005/03, ELSE1
  • "The degrees to which transtrochanteric rotational osteotomy moves the region of osteonecrotic femoral head out ot the weight-bearing area as evaluated by computer simulation", Clinical Biomechanics, 20, 1, 63-69, 2005/01, SCI
  • "In vitro study of dentin hypersensitivity treated by Nd:YAP laser and bioglass", Dental Materials, 21, 6, 511-519, 2004/08, SCI

研討會論文

  • "Development and biomechanical evaluation of an artificial cervical intervertebral disc with composite lattice structure", 12th Asian-Pacific Conference on Biomechanics, Kuala Lumpur, 2023/11/15
  • "不同啄動次數對根管製備之力學分析—有限元素分析", 2023年台灣生物力學學會年度學術研討會, 新竹市, 2023/10/13
  • "具備流固耦合緩衝機構之新式人工牙植體設計-有限元素分析", 2023年台灣生物力學學會年度學術研討會, 新竹市, 2023/10/13
  • "不同蜂巢結構鞋內墊設計對步態站立期間之足底壓力影響", 2023年台灣生物力學學會年度學術研討會, 新竹市, 2023/10/13
  • "拓撲最佳化設計新式人工頸椎間盤及生物力學研究-有限元素分析", 2023年台灣生物力學學會年度學術研討會, 新竹市, 2023/10/13
  • "不同根管擴孔尺寸之扭矩預測-有限元素分析", 2022年台灣生物力學學會年度學術研討會, 高雄, 2022/10/28
  • "具多孔結構之積層製造人工頸椎間盤生物力學探討-有限元素分析", 2022年台灣生物力學學會年度學術研討會, 高雄, 2022/10/28
  • "勁度優化之鏤空結構鞋內墊對足底壓力重分配之效應", 2022年台灣生物力學學會年度學術研討會, 高雄, 2022/10/28
  • "The development and biomechanical investigation of an additively manufactured hybrid artificial cervical disc - finite element analysis", The 9th World Congress of Biomechanics, Taipei, 2022/07/10
  • "積層製造鏤空鞋中底彎折勁度之負載速率依賴性探討", 2021臺灣生物力學學會年度學術研討會, 台北, 2021/10/16
  • "具流固耦合機轉之碟型彈簧式人工牙植體有限元素分析", 2021臺灣生物力學學會年度學術研討會, 台北, 2021/10/16
  • "積層製造之具曲率晶格人工頸椎間盤生物力學探討", 2021臺灣生物力學學會年度學術研討會, 台北, 2021/10/16
  • "新型鎳鈦旋轉器械於根管製備之力學分析", 2021臺灣生物力學學會年度學術研討會, 台北, 2021/10/16
  • "彈性裝置應用於具微動量機制新型人工牙植體之生物力學評估", 2020臺灣生物力學學會年度研討會暨科技部成果發表會, Taoyuan, 2020/10/17
  • "彈塑性與線彈性材料之鞋中底吸震特性比較-有限元素分析", 2020臺灣生物力學學會年度研討會暨科技部成果發表會, Taoyuan, 2020/10/17
  • "金屬積層製造之鏤空人工頸椎間盤開發-有限元素分析", 2020臺灣生物力學學會年度研討會暨科技部成果發表會, Taoyuan, 2020/10/17
  • "新型鎳鈦旋轉器械應用於不同彎曲根管之切削力學評估", 2020臺灣生物力學學會年度研討會暨科技部成果發表會, Taoyuan, 2020/10/17
  • "Influence of Different Ni Ti Rotary I nstrument Geometric Des igns on t he Drilling Mechanics", The 10th Asian-Pacific Conference on Biomechanics, 臺北, 2019/11/01
  • "Biomechanical Evaluation of Cellular, Auxetic Midsole Structures – Dynamic Finite Element Analysis", The 10th Asian-Pacific Conference on Biomechanics, 臺北, 2019/11/01
  • "Biomechanical Investigation of Different Vertebroplasty Procedures for Osteoporotic Vertebral Compression Fractures", The 10th Asian-Pacific Conference on Biomechanics, 臺北, 2019/11/01
  • "Biomechanical Evaluation of a Novel Dental Implant with Fluid-Solid Coupled Buffering Mechanism", The 10th Asian-Pacific Conference on Biomechanics, 臺北, 2019/11/01
  • "Using Finite Element Analysis to Evaluate the Biomechanical Performance of a Hydrogel Cervical Artificial Disc", The 10th Asian-Pacific Conference on Biomechanics, 臺北, 2019/11/01
  • "Effects of peritubular dentine widths and tubular filling materials on the dentinal stress distributions", 25屆歐洲生物力學學會學術大會, 維也納, 2019/07/07
  • "Investigation of a novel dentinal implant system with composite hydrogel – a finite element analysis", 25屆歐洲生物力學學會學術大會, 維也納, 2019/07/07
  • "Changes of leg and joint stiffness of the lower extremities in children with spastic hemiplegic cerebral palsy during gait", 2019年國際復健醫學學會學術大會, 神戶, 2019/06/09
  • "Kinematic Analysis of Lumbar Spine Motion with and without Genipin Exogenous Crosslinking Treatment Exogenous Crosslinking Treatment – A Finite Element Analysis", 2018中華民國力學學會年會暨第42屆全國力學會議, 台北, 2018/11/24
  • "Investigation of the effects of a novel hydrogel artificial Disc on the biomechanical performance of C2-T1 Cervical spine: A finite element study", 2018中華民國力學學會年會暨第42屆全國力學會議, 台北, 2018/11/24
  • "Evaluation of The Biomechanical Behavior of Hydrogels Applied to Movable Novel Dental Implants - Finite Element Analysis", 2018中華民國力學學會年會暨第42屆全國力學會議, 台北, 2018/11/24
  • "Investigation of the drilling mechanics of different taper designs of nickel-titanium rotary instruments – dynamic finite element analysis", 2018中華民國力學學會年會暨第42屆全國力學會議, 台北, 2018/11/24
  • "Investigation of the Plantar Pressure Reduction Effect of the Rearfoot by using Additive Manufactured Cellular Midsole – A Dynamic Finite Element Analysis", 2018中華民國力學學會年會暨第42屆全國力學會議, 台北, 2018/11/24
  • "Biomechanical investigation of different posterior fixation surgeries for spinal burst fracture", 8th World Congress of Biomechanics, 都柏林, 2018/07/08
  • "Effect of anterior rocker sole shoe profiles on the plantar fascia stress distributions during stance phase of gait - a dynamic numerical simulation", 2018 World Congress on Medical & Biomedical Engineering, 布拉格, 2018/06/03
  • "Effects of the Hollow Insole Structure Design on the Soft Tissue and Plantar Pressure during Heel Strike - A Dynamic Finite Element Analysis", 2017台灣生物力學學會年度學術研討會暨科技部成果發表會, 台北, 2017/10/14
  • "Mechanical Behavior of a Dental Implant System with Micro-Motion Mechanism under Biting Force – a Finite Element Analysis", 2017台灣生物力學學會年度學術研討會暨科技部成果發表會, 台北, 2017/10/14
  • "Investigation of the Mechanical Behavior of Artificial Disc under ASTM F2346-05 Test Standard Loading Conditions : Finite Element Analysis", 2017台灣生物力學學會年度學術研討會暨科技部成果發表會, 台北, 2017/10/14
  • "The Biomechanical and Biochemical Analyses of Human Lumbar Degenerated Intervertebral Disc with and without Exogenous Crosslinking Treatment", 2017台灣生物力學學會年度學術研討會暨科技部成果發表會, 台北, 2017/10/14
  • "Evaluation of Plantar Pressure Relieve Effects of 3D - Printed Footwear Midsole during Stance Phase of Gait – a Dynamic Finite Element Analysis", 2017台灣生物力學學會年度學術研討會暨科技部成果發表會, 台北, 2017/10/14
  • "Mechanical Effects of the Existence of Peritubular Dentine and Dentine Tubule Filling - Finite Element Analysis", 2017台灣生物力學學會年度學術研討會暨科技部成果發表會, 台北, 2017/10/14
  • "Biomechanical Study Of Hybrid Fusion And Non-Fusion Cervical Disc Replacement Surgeries- A Finite Element Analysis", XXVI Congress of the International Society of Biomechanics, 布里斯本, 2017/07/23
  • "骨錨定裝置之幾何外型參數最佳化-有限元素分析", 2017國際生物力學與復建工程暨輔具科技研討會, 澎湖, 2017/04/15
  • "錐形牙植體鑽頭對齒槽骨鑽孔時之熱效應", 2017國際生物力學與復建工程暨輔具科技研討會, 澎湖, 2017/04/15
  • "Finite Element Analysis for Optimal Location and Size of the Metatarsal Pad", Asian Prosthetic and Orthotic Scientific Meeting 2016, Seoul, 2016/11/04
  • "The Mechanical Behavior of WaveOne Gold Instruments during Canal Preparation – Finite Element Analysis", 2016台灣生物力學學會年度學術研討會暨科技部成果發表會 & 2016 智慧輔具產業與技術研討會, 台中, 2016/10/29
  • "Effect of the Anterior Rocker Sole Shoe Designs on Loading of the Plantar Aponeurosis - a dynamic finite element analysis", 2016台灣生物力學學會年度學術研討會暨科技部成果發表會 & 2016 智慧輔具產業與技術研討會, 台中, 2016/10/29
  • "Exogenous Cross Linking Effect of Creep Behavior and Permeability with Porcine Lumbar Intervertebral Disc Ring", 2016台灣生物力學學會年度學術研討會暨科技部成果發表會 & 2016 智慧輔具產業與技術研討會, 台中, 2016/10/29
  • "Effect of shoe insole designs on the relationship between the forefoot and rearfoot- a preliminary study of kinematics", XIV International Symposium on 3D Analysis of Human Movement, Taipei, 2016/07/18
  • "不同後位固定手術用於胸腰椎爆炸性骨折之力學分析-有限元素分析", 2015生物醫學工程科技研討會, 台北市, 2015/11/13
  • "治療蹠骨頭疼痛之蹠骨墊擺放位置對於足底壓力之影響", 2015生物醫學工程科技研討會, 台北市, 2015/11/13
  • "不同轉速下人工牙植體鑽頭切削時齒槽骨之力學及溫度效應", 2015生物醫學工程科技研討會, 台北市, 2015/11/13
  • "人工髓核水膠之開發與生物力學測試", 2015生物醫學工程科技研討會, 台北市, 2015/11/13
  • "以有限元素分析探討偏心型鎳鈦旋轉器械在根管製備時之力學行為", 2015生物醫學工程科技研討會, 台北市, 2015/11/13
  • "In vivo restoration of porcine intradiscal pressure after annular injury by crosslink augmentation", 中華民國骨科醫學會年度研討會, 台北市, 2015/10/31
  • "Development of Needle Pressure Sensor and Measurement of Intradiscal Pressure", 中華民國骨科醫學會年度研討會, 台北市, 2015/10/31
  • "Effects of geometries and spindle speeds on the drilling behavior of dental implant drill", 台灣生物力學年度學術研討會, 高雄, 2015/10/16
  • "Effects of root canal preparation sequence on the mechanical behaviors of Ni-Ti rotary instuments", 台灣生物力學年度學術研討會, 高雄, 2015/10/16
  • "The in vivo influence of exogenous collagen crosslink augmentation on the disc integrity following a stabbing injury - a swine model", The 8th Asian-Pacific Conference on Biomechanics, 札幌, 2015/09/16
  • "Changes in Plantar Pressure Distribution in Response to Different Metatarsal Pad Designs and Placements during Walking - a Dynamic Finite Element Analysis", ISPO world Congress, 里昂, 2015/06/22
  • "The In Vivo Effects of Exogenous Crosslinking on the Mechanical Function of Injured Rat Tail Discs under the Short-Term, Diurnal Compression Loading", Orthopaedic Research Society, Las Vegas, 2015/03/28
  • "Time-dependent Biomechanical Behaviour of a Hydrogel-based Disc Arthroplasty", Orthopaedic Research Society, Las Vegas, 2015/03/28
  • "鎳鈦旋轉器械於根管內切削之有限元素分析", 中華民國力學學會第三十八屆全國力學會議, 基隆, 2014/11/21
  • "不同鑽頂角之人工牙根鑽頭於切削時之動態有限元素分析", 中華民國力學學會第三十八屆全國力學會議, 基隆, 2014/11/21
  • "Biomechanical Comparisons of Plating by Metallic or Biodegradable Implants in Anterior Cervical Discectomy and Fusion: A Finite Element Analysis", International Scientific Meeting on Biomechanics, 臺北, 2014/11/21
  • "不同內固定裝置治療Pauwels III型股骨頸骨折之有限元素分析", 中華民國力學學會第三十八屆全國力學會議, 基隆, 2014/11/21
  • "Biomechanical behavior of a hydrogel-based TDR device", 1st Global Conference on Biomedical Engineering and 9th Asian Pacific Conference on Medical and Biological Engineering,, 臺南, 2014/10/09
  • "Development of a micro-motion dental implant system", 1st Global Conference on Biomedical Engineering and 9th Asian Pacific Conference on Medical and Biological Engineering,, 臺南, 2014/10/09
  • "Effects of different metatarsal pad designs and placements on plantar pressure distribution.", 1st Global Conference on Biomedical Engineering and 9th Asian Pacific Conference on Medical and Biological Engineering,, 臺南, 2014/10/09
  • "Design and finite element analysis of a novel dental implant abutment with micro-motion capability", 7th World Congress of Biomechanics, Boston, 2014/07/06
  • "The Effect of the Anterior Rocker Sole Shoe Designs on the Loading of the Plantar Aponeurosis - a dynamic finite element analysis", 7th World Congress of Biomechanics, Boston, 2014/07/06
  • "探討人工膝關節置換術中置放可吸收性止血凝膠海綿對術後骨水泥式脛骨元件生物力學行為之影響", 2013生物醫學工程科技研討會, 中壢市, 2013/11/15
  • "蹠骨墊在不同擺放位置對於足底壓力分佈之影響", 2013生物醫學工程科技研討會, 中壢市, 2013/11/15
  • "牙周膜韌帶與牙柱釘對於根管治療後正中門齒應力之影響", 2013生物醫學工程科技研討會, 中壢市, 2013/11/15
  • "生物可降解複合式骨板於前位頸椎融合術之生物力學分析", 2013生物醫學工程科技研討會, 中壢市, 2013/11/15
  • "預成形孔座對於牙植體植入扭矩之影響", 2013生物醫學工程科技研討會, 中壢市, 2013/11/15
  • "以有限元素分析探討骨水泥空缺對骨水泥式脛骨元件穩定性之影響", 2012國際生物力學研討會暨台灣生物力學年度學術研討會, 臺北, 2012/12/23
  • "不同情境之高架作業墜落生物力學分析", 生物醫學工程科技研討會暨國科會醫工學門成果發表會, 中壢, 2012/11/17
  • "新型人工牙植體系統之研發", 生物醫學工程科技研討會暨國科會醫工學門成果發表會, 中壢, 2012/11/17
  • "Biomechanical comparison of lumbosacral spine followinf three different total disc arthroplasties: finite element analysis", 2012世界醫學倫理與生物醫學工程大會World congress on Medical Physics and Biomedical Engineering, 北京, 2012/05/26
  • "外源性交聯對活體豬損傷椎間盤完整性之影響", 台灣脊椎外科醫學會第二十次學術研討會, 桃園, 2012/03/17
  • "Design and analysis of a novel implant with buffering mechanism", 2011 International Biomechanics Conference & Annual Meeting of Taiwanese Society of Biomechanics, 新竹, 2011/10/20
  • "The Biomechanical Behavior of Plantar Fascia during Stance Phase of Gait Cycle – A Finite Element Analysis", 2011 International Biomechanics Conference & Annual Meeting of Taiwanese Society of Biomechanics, 新竹, 2011/10/20
  • "Biomechanical Influences of Different Artificial Lumbar Disc Implants on the Lumbosacral Spine", 2011 International Biomechanics Conference & Annual Meeting of Taiwanese Society of Biomechanics, 新竹, 2011/10/20
  • "The Effect of Exogenous Crosslinking in Restoring the Integrity of Porcine Lumbar Intervertebral Disc In Vivo after Stabbing Injure", International Society of Biomechanics, ISB 2011, Brussels, 2011/07/03
  • "Biomechanical Evaluation of Different Design types of Artificial Cervical Discs", International Society of Biomechanics, ISB 2011, Brussels, 2011/07/03
  • "Design and Finite Element Analysis of a Novel Resilient Dental Implant", International Society of Biomechanics, ISB 2011, Brussels, 2011/07/03
  • "利用有限元素分析探討不同螺紋外形之人工牙根", 中國機械工程學會年會暨第27屆學術研討會, 台北, 2010/12/10
  • "不同脊突間植入物在脊椎活動度與椎間盤壓力之生物力學研究", 中國機械工程學會年會暨第27屆學術研討會, 台北, 2010/12/10
  • "Finite Element Analysis of Dental Implants with Different Thread Designs", 6th World Congress on Biomechanics, 新加坡, 2010/08/01
  • "Biomechanical evaluation of three different interspinous process decompression devices in lumbar spine following nucleotomy", 6th World Congress on Biomechanics, 新加坡, 2010/08/01
  • "The Effect of Exogenous Crosslinking Reagent Genipin on Biphasic Permeability of Lumbar Annulus Fibrosus in Confined Compression", 6th World Congress on Biomechanics, 新加坡, 2010/08/01
  • "The effect of newly-designed dynamic cushion system with spring elements on buttocks pressure distribution in patients with spinal cord injury", The 13th world congress of the inernational society for prosthetics and orthotics, Leipzig, 2010/05/10
  • "Effect of different insole material combinations on the plantar pressure of normal foot", 2nd Asia-Oceanian Conference of Physical and Rehabilitation Medicine, 台北, 2010/04/29
  • "The effect of newly-designed dynamic cushion system on buttocks pressure distribution in paraplegic patients", 2nd Asia-Oceanian Conference of Physical and Rehabilitation Medicine, 台北, 2010/04/29
  • "The effect of newly-designed dynamic cushion system on deep tissue of human of human buttock: A 3D finite element analysis", 2nd Asia-Oceanian Conference of Physical and Rehabilitation Medicine, 台北, 2010/04/29
  • "Biomechanical Comparison of 3 Different Interspinous Process Devices for the Lumbar Spine - A Finite Element Analysis", 中華民國骨科春季學術研討會, 台中, 2010/04/24
  • "The Effect of Crosslinking Reagent (Genipin) on Poroviscoelastic Properties in Annulus Fibrosus of Lumbar Intervertebral Disc", 生物醫學工程年會及暨科技研討會, 台北(陽明大學), 2009/12/11
  • "Mechanical Analysis of Different Cross-section Designs for Ni-Ti Rotary Instruments", 生物醫學工程年會及暨科技研討會, 台北(陽明大學), 2009/12/11
  • "The effect of dynamic cushion system with spring elements on buttocks pressure distribution in patients with spinal cord injury", 生物醫學工程年會及暨科技研討會, 台北(陽明大學), 2009/12/11
  • "The effect of load sharing after crosslinking augmentation in intervertebral disc analyzed by direct measurement of internal and external strain under compressive loading", 中華民國骨科醫學會98年度第57 次聯合學術研討會, 台北(台大國際會議中心), 2009/10/24
  • "The Effect of Crosslinking Reagent (Genipin) on Poroviscoelastic Properties in Annulus Fibrosus of Lumbar Intervertebral Disc", 中華民國骨科醫學會98年度第57 次聯合學術研討會, 台北(台大國際會議中心), 2009/10/24
  • "Finite Element Analysis of Dental Mini-screw Thread Designs", 生物醫學工程年會及暨科技研討會, 桃園(長庚大學), 2008/12/12
  • "Dynamic Test and Finite Element Analysis of Nickel-Titanium Rotary instrumentation", 生物醫學工程年會及暨科技研討會, 桃園(長庚大學), 2008/12/12
  • "The Loading Mechanism after Partial Discectomy:Three-Dimensional Nonlinear Finite Element Analyses", 生物醫學工程年會及暨科技研討會, 桃園(長庚大學), 2008/12/12
  • "The evaluation of biomechanical response to dynamic cushion system with spring element upon human buttock", 生物醫學工程年會及暨科技研討會, 桃園(長庚大學), 2008/12/12
  • "The Evaluation of Stress Distribution of the Different Layers in Rearfoot Plantar Soft Tissue during Stance Phase", 生物醫學工程年會及暨科技研討會, 桃園(長庚大學), 2008/12/12
  • "The Investigation of the Effect of Exogenous Crosslink to the Hydraulic Permeability of Annulus Fibrosus of intervertebral discs", 骨科醫學會, 桃園(長庚大學), 2008/10/25
  • "Biomechanical Analysis of Interspinous Process Device based on A Three-diamentional Finite Elements Analysis", 台灣生物力學研討會暨國科會醫學工程學門成果發表會, 台南(成功大學), 2007/12/21
  • "The Viscoelastic Properties Testing of Porcine Intervertebral Disc", 台灣生物力學研討會暨國科會醫學工程學門成果發表會, 台南(成功大學), 2007/12/21
  • "Effects of Different Ground Conditions and Load Carrying Ways on Postural Balance", 台灣生物力學研討會暨國科會醫學工程學門成果發表會, 台南(成功大學), 2007/12/21
  • "Investigation of The Mechanical Properties of Different Foot Insole Materials", 台灣生物力學研討會暨國科會醫學工程學門成果發表會, 台南(成功大學), 2007/12/21
  • "Influence of Canal Geometry on the Mechanics of Nickel-titanium Endodontic Rotary Instrumentation", 中華民國生物醫學工程科技研討會, 台中(逢甲大學), 2007/12/14
  • "Finite Element Analysis of Different Design Types of Artificial Cervical Disc", 中華民國生物醫學工程科技研討會, 台中(逢甲大學), 2007/12/14
  • "The Effect of Malalignment of Knee Prosthesis on the Stress Distribution and War Depth of Postoperative Knee Joint", 中華民國生物醫學工程科技研討會, 台中(逢甲大學), 2007/12/14
  • "The Effects of Plantar Fascia on Biomechanical Behavior of Foot", 中華民國生物醫學工程科技研討會, 台中(逢甲大學), 2007/12/14
  • "Biomechanical Analysis of Interspinous Device Based on A Three-dimensional Finite Elements", 3th Asian Pacific Conference on Biomechanics, Tokyo, 2007/11/05
  • "Biomechanical Evaluation of Functional Foot Orthoses with Carbon Fiber Plate -A Finite Element Analysis", 3th Asian Pacific Conference on Biomechanics, Tokyo, 2007/11/05
  • "The Biomechanical Study of a Modified Wire-locked Screw and Plate Fixator for Femoral Periprosthetic Fracture after Total Hip Arthroplasty", 3th Asian Pacific Conference on Biomechanics, Tokyo, 2007/11/05
  • "Finite Element Analysis of Nickel-Titanium Rotary Instrumentation in Endodontic Root Canal Preparation", 21th Congress of International Society of Biomeshanics, Taipei, 2007/07/01
  • "Combining Experimental Material Property Test and Finite Element Analysis to Investigate the Plantar Foot Pressure Distribution During Standing", 21th Congress of International Society of Biomeshanics, Taipei, 2007/07/01
  • "Finite Element Analysis of a Ball-and-Socket Type Artifical Cerrical Disc", 11th International Symposium on Computer Simulation in Biomechanics, Tainan, 2007/06/28
  • "Finite Element Analysis of Different Design of Anterior Lumbar Interbody Fusion Cages", 中華民國生物醫學工程科技研討會, 台北(台灣大學), 2006/12/15
  • "Effects of plantar soft tissue and insole mechanical properties on the plantar pressure distribution – A finite element analysis", 中華民國生物醫學工程科技研討會, 台北(台灣大學), 2006/12/15
  • "Mechanics of nickel- Titanium rotary instrumentation applied to endodontic treatment", 中華民國生物醫學工程科技研討會, 台北(台灣大學), 2006/12/15
  • "The Effect of Malalignment of Knee Prosthesis on The Stability of Postoperative Knee Joint", 中華民國生物力學年會, 台南(成功大學), 2006/12/09
  • "The influence of femoral neck offset and extent of distal fixation of femoral stem on the stability of postoperative femur in THA revision", 中華民國生物力學年會, 台南(成功大學), 2006/12/09
  • "The development and validation of a T12-L1 finite element model", 中華民國骨科醫學會, 台北(台北榮民總醫院), 2006/10/28
  • "Biomechanical Comparison of Anterior Lumbar Interbody Fusion Cages Based on a Finite Element Analysis", 中華民國骨科醫學會, 台北, 2006/10/28
  • "Finite Element Analysis of Four Different Lumbar Interbody Fusion Cage Designs", 5th World Congress of Biomechanics, Munich, 2006/07/29
  • "Effect of different walking speed on plantar pressure during heel strike to mid- stance phase – 3D dynamic finite element analysis", 5th World Congress of Biomechanics, Munich, 2006/07/29
  • "Biomechanical Evaluation of Using Iliac Bone or Rib Bone Graft in Anterior T12-L1 Interbody Fusion and Effect of Triangulation of the Anterior Fixation Screws", 5th World Congress of Biomechanics, Munich, 2006/07/29
  • "不同補骨來源及固定方式之前位胸腰椎融合術的生物力學評估", 生物醫學工程科技研討會, 中壢(中原大學), 2005/12/17
  • "Mechanics of Endodontic Nickel-Titanium Rotary Instrumentation", The 2nd Asian Pacific Conference on Biomechanics, Taipei, 2005/11/23
  • "Parametric analysis for artificial femoral stem with various flutes and tapers", The 2nd Asian Pacific Conference on Biomechanics, Taipei, 2005/11/23
  • "Biomechanical analysis of lumbar interbody spacers based on a three-dimensional finite elements method.", The 2nd Asian Pacific Conference on Biomechanics, Taipei, 2005/11/23
  • "Dynamic Simulation of Foot During Heel Strike to Mid-stance Phase", The 2nd Asian Pacific Conference on Biomechanics, Taipei, 2005/11/23
  • "Evaluation of DifferentPosterior Atlantoaxial Fixation Technique Using Finite Element Method", 中華民國骨科醫學會, 台北(台北榮民總醫院), 2005/10/29
  • "Dynamic Simulation And Experimental Validation Of The Plantar Foot Pressure During Heel Strike.", Congress of the International Society of Biomechanics, Cleveland, Ohio, 2005/07/31
  • "Biomechanical study in the optimization of different fixation modes for a proximal femur L-osteotomy – a three-dimensional finite element simulation", Congress of the International Society of Biomechanics, Cleveland, Ohio, 2005/07/31
  • "Effects of different rotational osteotomies on the stress reduction for femoral head osteonecrosis", 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE 2005), Tsukuba, 2005/04/24
  • "Effects of material property and geometry on the stability of post-core system for endodontically treated teeth.", 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE 2005), Tsukuba, 2005/04/24
  • "Study of different angulations of double-screw fixation for anterior vertebral fusion surgery", 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE 2005), Tsukuba, 2005/04/24
  • "Plating treatment for tibial plateau fractures: a biomechanical comparison of buttress and tension band technique", 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE 2005), Tsukuba, 2005/04/24
回頁首