按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

顏維謀教授W.M.YAN

現職:
臺北科大/能源與冷凍空調工程系

期刊論文

  • "Experimental study on evolution of longitudinal vortex rolls subject to the duct tilted in the spanwise direction", Int. Communi. Heat Mass Transfer, 149, 107125, 2023/12, SCI
  • "Experimental study on thermal performance of water/nano-phase change emulsion through a mini- and micro-channel stacked double-layer heat sink", Int. J. Heat Mass Transfer, 217, 124695, 2023/12, SCI
  • "Temperature control in warehouse with internal and external heat rejections", Int. J. Thermal Sciences, 194, 108600, 2023/12, SCI
  • "Experimental study of dynamic melting process in an ice-on-coil storage system", J. Energy Storage, 73, 109177, 2023/12, SCI
  • "Study on the performance enhancement of ice storage and melting processes in an ice-on-coil thermal energy storage system", J. Energy Storage, 72, 108410, 2023/11, SCI
  • "Performance evaluation of TiN/Ti coatings on the aluminum alloy bipolar plates for PEM fuel cells", Renewable Energy, 216, 119042, 2023/11, SCI
  • "Comparison of cooling performance of nanouid ows in mini/ micro-channel stacked double- layer heat sink and single-layer micro-channel heat sink", Int. J. Thermal Sciences, 191, 108375, 2023/09, SCI
  • "Numerical and experimental study on the heat and mass transfer of kiwifruit during vacuum freeze drying process", Alexandria Engineering Journal, 73, 427-442, 2023/09, SCI
  • "Unsteady heat transfer characteristics of R-407C in the subcooled ow boiling stemming from the oscillating refrigerant ow rate", Case Studies in Thermal Engineering, 47, 103071, 2023/07, SCI
  • "Deep learning-based assessment of saturated flow boiling heat transfer and two-phase pressure drop for evaporating flow", Engineering Analysis with Boundary Elements, 151, 519-537, 2023/06, SCI
  • "Numerical analysis of hot steam injection through an embedded channel inside a 3D steam turbine blade", Applied Thermal Engineering, 225, 120229, 2023/05, SCI
  • "Performance investigation of solar assisted desiccant integrated Maisotsenko cycle cooler in subtropical climate conditions", Case Studies in Thermal Engineering, 44, 102864, 2023/04, SCI
  • "Effectively inhibiting particles aggregation and sedimentation for TiO2-H2O suspension by application of an electrode", J. Dispersion Science and Technology, 44, 679-685, 2023/04, SCI
  • "Optimal technical analysis of vacuum ejector for passive hydrogen recovery", Int. J. Hydrogen Energy, 48, 8260-8268, 2023/03, SCI
  • "An experimental study on planar vacuum membrane dehumidier equipped with serpentine ow channel plate", Alexandria Engineering Journal, 64, 13-23, 2023/02, SCI
  • "On the assessment of the thermal performance of microchannel heat sink with nanouid", Int. J. Heat Mass Transfer, 201, 123572, 2023/02, SCI
  • "Microwave-assisted freeze drying of pineapple: Kinetic, product quality, and energy consumption", Case Studies in Thermal Engineering, 41, 102682, 2023/01, SCI
  • ". Numerical Simulation of a Flat-Sheet Membrane-based Dehumidier with Various Serpentine Flow Channels", Int. J. Refrigeration, 145, 50-58, 2023/01, SCI
  • "Enhancement of phase change material melting using nanoparticles and magnetic field in the thermal energy storage system with strip fins", J. Energy Storage, 57, 106282, 2023/01, SCI
  • "Manufacturing and potential applications of lattice structures in thermal systems: A comprehensive review of recent advances", Int. J. Heat Mass Transfer, 198, 123352, 2022/12, SCI
  • "Experimental study on performance measurement of planar vacuum membrane dehumidifier with serpentine flow channel designs", Alexandria Engineering Journal, 61, 10701-10711, 2022/12, SCI
  • "Applications of machine learning techniques in performance evaluation of solar desalination systems – A concise review", Engineering Analysis with Boundary Elements, 144, 399-408, 2022/11, SCI
  • "Fabrication of stable and versatile superhydrophobic PTFE coating by simple electrodeposition on metal surface", Progress in Organic Coatings, 172, 107090, 2022/11, SCI
  • "Assessment on R-410A saturated flow boiling heat transfer subject to periodic oscillating heat flux inside an annular duct", J. Power Sources, 548, 232068, 2022/11, SCI
  • "Assessment on R-410A saturated flow boiling heat transfer subject to periodic oscillating heat flux inside an annular duct", Int. J. Thermal Sciences, 179, 107625, 2022/09, SCI
  • "Liquid-to-vapor phase change heat transfer evaluation and parameter sensitivity analysis of nanoporous surface coatings", Int. J. Heat Mass Transfer, 194, 123088, 2022/09, SCI
  • "On the assessment of the mechanical properties of additively manufactured lattice structures", Engineering Analysis with Boundary Elements, 142, 93-116, 2022/09, SCI
  • "Evaporative heat transfer of R410A flow in an annular duct under oscillatory wall heat flux", Int. J. Heat Mass Transfer, 191, 122841, 2022/08, SCI
  • "Techno-financial evaluation of a hybrid renewable solution for supplying the predicted power outages by machine learning methods in rural areas", Renewable Energy, 194, 1303-1325, 2022/07, SCI
  • "Experimental study on cooling performance of water-based hybrid nanofluid with PCM and graphene nanoparticles", Case Studies in Thermal Engineering, 33, 101939, 2022/05, SCI
  • "Influence of the process parameters on the energy conservation and quality of the kiwi fruit subjected to vacuum freeze-drying", Case Studies in Thermal Engineering, 33, 101935, 2022/05, SCI
  • "Performance assessment of a flat-sheet membrane-based dehumidifier with serpentine flow channels: An experimental study", Energy Conversion and Management, 258, 115492, 2022/04, SCI
  • "On the Assessment of Unsteady Evaporation Heat Transfer due to Oscillating Flow Rate in a Narrow Annular Duct", Int. J. Heat Mass Transfer, 184, 122356, 2022/03, SCI
  • "Unsteady phenomena in saturated flow boiling heat transfer – An experimental study on oscillating refrigerant mass flux", Alexandria Engineering Journal, 61, 2430-2442, 2022/03, SCI
  • "Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell", Int. J. Energy Research, 46, 1553-1564, 2022/02, SCI
  • "Efficacy of turbulent convective heat transfer in a circular tube with water-based nanoemulsion of n–Eicosane–An experimental study", Int. J. Heat Mass Transfer, 183, 122062, 2022/02, SCI
  • "Role of phase change materials thickness for photovoltaic thermal management", Sustainable Energy Technologies and Assessments, 49, 101719, 2022/02, SCI
  • "Cooling characteristics and entropy production of nanofluid flowing through tube", Alexandria Engineering Journal, 61, 427-441, 2022/01, SCI
  • "Improvement of hotspot cooling in confinement space by corona discharge induced ionic wind", Int. J. Thermal Sciences, 169, 107087, 2021/11, SCI
  • "Experimental study on influence of oscillatory heat flux on heat transfer of R-134a time-periodic subcooled flow boiling in annular duct", Int. J. Thermal Sciences, 167, 106988, 2021/09, SCI
  • "A numerical simulation validated experimentally for thermally developing convection characteristics of a phase change nanofluid flow in a circular tube", Case Studies in Thermal Engineering, 25, 100925, 2021/06, SCI
  • "An investigation on the thermal energy storage in an enclosure packed with micro-encapsulated phase change material", Case Studies in Thermal Engineering, 25, 100987, 2021/06, SCI
  • "Cooling performance of mini-channel heat sink with water-based nano-PCM emulsion-An experimental study", Int. J. Thermal Sciences, 164, 106903, 2021/06, SCI
  • "Thermal-hydraulic behavior of lotus like structured rGO-ZnO composite dispersed hybrid nanofluid in mini channel heat sink", Int. J. Thermal Sciences, 164, 106886, 2021/06, SCI
  • "A novel geometrical design of gas-to-gas planar membrane humidifier for proton electrolyte membrane fuel cells", Int. J. Energy Research, 2021/05, SCI
  • "Experimental study on R-410A subcooled flow boiling heat transfer and bubble behavior inside horizontal annuli", Int. Communi. Heat Mass Transfer, 124, 105283, 2021/05, SCI
  • "Experimental study on cooling performance of nanofluid flow in a horizontal circular tube", Int. J. Heat Mass Transfer, 169, 120961, 2021/04, SCI
  • "Study on heat transfer and bubble behavior inside horizontal annuli: Experimental comparison of R-134a, R–407C, and R-410A subcooled flow boiling", Case Studies in Thermal Engineering, 24, 100875, 2021/04, SCI
  • "Thermophysical properties of water-based nano-emulsion of tricosane - An Experimental investigation", Case Studies in Thermal Engineering, 24, 100849, 2021/04, SCI
  • "A novel super-cooling enhancement method for a two-stage thermoelectric cooler using integrated triangular-square current pulses", Energy, 217, 119360, 2021/02, SCI
  • "Convective heat transfer of nano-encapsulated phase change material suspension in a divergent minichannel heatsink", Int. J. Heat Mass Transfer, 165, 120717, 2021/02, SCI
  • "Effects of operating parameters and load mode on dynamic cell performance of proton exchange membrane fuel cell", Int. J. Energy Research, 2021/02, SCI
  • "A fluid dynamics perspective on the flow dependent performance of honey comb microbial fuel cells", Energy, 214, 118928, 2021/01, SCI
  • "Experimental study on thermophysical properties of water-based nanoemulsion of n-eicosane PCM", J. Molecular Liquids, 321, 114760, 2021/01, SCI
  • "Effect of channel structure on the performance of a planar membrane humidifier for proton exchange membrane fuel cell", Int. J. Heat Mass Transfer, 163, 120522, 2020/12, SCI
  • "Protection efficiencies of surface-active inhibitors in zinc-air batteries", Int. J. Energy Research, 44, 11883–11893, 2020/11, SCI
  • "Experimental study on streamwise interaction of burning compound droplets", Case Studies in Thermal Engineering, 21, 100707, 2020/10, SCI
  • "Techno-economic assessment of a hybrid system for energy supply in the affected areas by natural disasters: A case study", Energy Conversion and Management, 221, 113170, 2020/10, SCI
  • "Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization", Applied Thermal Engineering, 179, 115721, 2020/10, SCI
  • "Energy storage analysis for discharging of nanoparticle enhanced phase change material within a triplex-tube thermal storage", Journal of Energy Storage, 31, 101640, 2020/10, SCI
  • "Review on design factors of microbial fuel cells using Buckingham’s Pi Theorem", Renewable and Sustainable Energy Reviews, 130, 109878, 2020/09, SCI
  • "Experimental study on bubble characteristics of time periodic subcooled flow boiling in annular ducts due to wall heat flux oscillation", Int. J. Heat Mass Transfer, 157, 119974, 2020/08, SCI
  • "Numerical study on forced convection in the exhaust problem using the spectral line-based weighted sum of gray gases model", Int. J. Heat Mass Transfer, 156, 119837, 2020/08, SCI
  • "Numerical study on forced convection of water-based suspensions of nanoencapsulated PCM particles/ Al 2 O 3 nanoparticles in a mini-channel heat sink", Int. J. Heat Mass Transfer, 157, 119965, 2020/08, SCI
  • "Numerical study on heat and mass transfer performance of the planar membrane-based humidifier for PEMFC", Int. J. Heat Mass Transfer, 157, 119918, 2020/08, SCI
  • "Performance improvement of air-breathing proton exchange membrane fuel cell stacks by thermal management", Int. J. Hydrogen Ennergy, 45, 22324-22339, 2020/08, SCI
  • "Forced convection heat transfer of Nano-Encapsulated Phase Change Material (NEPCM) suspension in a mini-channel heatsink", Int. J. Heat Mass Transfer, 155, 119858, 2020/07, SCI
  • "Paraffin core-polymer shell micro-encapsulated phase change materials and expanded graphite particles as an enhanced energy storage medium in heat exchangers", Advanced Powder Technology, 31, 2421-2429, 2020/06, SCI
  • "Numerical study on convective heat transfer of nanofluid in a minichannel heat sink with micro-encapsulated PCM-cooled ceiling", Int. J. Heat Mass Transfer, 153, 2020/06, SCI
  • "Experimental analysis of a photovoltaic/thermoelectric generator using cobalt oxide nanofluid and phase change material heat sink", Energy Conversion and Management, 212, 112780, 2020/05, SCI
  • "Effects of reformate on performance of PBI/H3PO4 proton exchange membrane fuel cell stack", Int.J. Hydrogen Energy, 45, 15346-15357, 2020/05, SCI
  • "Study on heat and mass transfer of a planar membrane humidifier for PEM fuel cell", Int. J. Heat Mass Transfer, 152, 2020/05, SCI
  • "Enhancement of air-flow management in Zn-air fuel cells by the optimization of air-flow parameters", Energy, 197, 2020/04, SCI
  • "Experimental and numerical study on convective boiling in a staggered array of micro pin-fin microgap", Int. J. Heat Mass Transfer, 149, 2020/03, SCI
  • "Optimization of a double-layered microchannel heat sink with semi-porous-ribs by multi-objective genetic algorithm", Int. J. Heat Mass Transfer, 149, 2020/03, SCI
  • "Thermal-hydraulic analysis for alumina/water nanofluid inside a minichannel heat sink with latent heat cooling ceiling-An experimental study", Int. Communi. Heat Mass Transfer, 112, 2020/03, SCI
  • "Cooling of the hot steel balls by salt –water solutions and water-based suspensions: Subcooled pool boiling experiments", Int. J. Thermal Sciences, 148, 2020/02, SCI
  • "Experimental study on heat and mass transfer of a multi-stage planar dehumidifier", Int. J. Heat Mass Transfer, 148, 2020/02, SCI
  • "Water-based nano-PCM emulsion flow and heat transfer in divergent mini-channel heat sink—An experimental investigation", Int. J. Heat Mass Transfer, 148, 2020/02, SCI
  • "Properties and Phase Behavior of Water-in-Diesel Microemulsion Fuels Stabilized by Nonionic Surfactants in Combination with Aliphatic Alcohol", Energy Fuels, 34, 2135-2142, 2020/02, SCI
  • "Discharge performance of Zn-air fuel cells under the influence of Carbopol 940 thickener", Int. J. Energy Research, 2020/02, SCI
  • "Experimental study on thermal performance of water-based nano-PCM emulsion flow in multichannel heat sinks with parallel and divergent rectangular mini-channels", Int. J. Heat Mass Transfer, 146, 2020/01, SCI
  • "Thermal performance of phase change nano-emulsion in a rectangular minichannel with wall conduction effect", Int. Communi. Heat Mass Transfer, 110, 2020/01, SCI
  • "Thermal performance of various cross sectioned rectangular minichannels with waterbased phase change nano suspensions", Int. J. Energy Research, 44, 344-359, 2020/01, SCI
  • "Optimization of pulse current on energy storage of zinc-air flow batteries", J. Power Sources, 2019/12, SCI
  • "Solar humidification-dehumidification desalination systems: A critical review", Energy Conversion and Management, 2019/12, SCI
  • "Experimental study on convective boiling flow and heat transfer in a microgap enhanced with a staggered arrangement of nucleated micro-pin-fins", Int. J. Heat Mass Transfer, 2019/12, SCI
  • "Molecular dynamics simulation on evaporation enhancement of water and aqueous nano-films by the application of alternating electric field", Int. J. Heat Mass Transfer, 2019/12, SCI
  • "Experimental study of boiling heat transfer in a microchannel with nucleated-shape columnar micro-pin-fins", Int. Commun. Heat Mass Transfer, 2019/11, SCI
  • "Experimental study on water spray uniformity in an evaporative condenser of a water chiller", Case Studies in Thermal Engineering, 2019/11, SCI
  • "Physical properties measurement and performance analysis of membranes for a multi-stage planar membrane dehumidifier", Case Studies in Thermal Engineering, 2019/11, SCI
  • "Comparison of performance degradation of high temperature PEM fuel cells with different bipolar plates", Energy, 2019/11, SCI
  • "Highly heterogeneous interior structure of biofilm wastewater for enhanced pollutant removals", Bioresource Technology, 2019/11, SCI
  • "Thermal performance of various crosssectioned rectangular minichannels with waterbased phase change nano suspensions", Int. J. Energy research, 2019/10, SCI
  • "Optimal design and technical analysis of a grid-connected hybrid photovoltaic/diesel/biogas under different economic conditions: A case study", Energy Conversion and Management, 198, 2019/10, SCI
  • "Performance improvement of air-breathing proton exchange membrane fuel cell stacks by thermal management", Int. J. Hydrogen Energy, 2019/09, SCI
  • "Experimental study of cooling characteristics of water-based alumina nanofluid in a minichannel heat sink", Case Studies in Thermal Engineering, 14, 100418, 2019/09, SCI
  • "Experimental study on transient supercooling of two-stage thermoelectric cooler", Case Studies in Thermal Engineering, 100509, 2019/09, SCI
  • "Warming-up and evaporation characteristics of homogeneous and heterogeneous water droplets", Int. J. Heat Mass Transfer, 138, 1061-1074, 2019/08, SCI
  • "Acceleration of aqueous nano-film evaporation by applying parallel electric field: A molecular dynamics simulation", Int. J. Heat Mass Transfer, 138, 68-74, 2019/08, SCI
  • "Experimental study on convective boiling of micro-pin-finned channels with parallel arrangement fins for FC-72 dielectric fluid", Int. J. Heat Mass Transfer, 138, 390-400, 2019/08, SCI
  • "Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte", Chemical Physics Letters, 728, 160-166, 2019/08, SCI
  • "Innovative multi‐processed N‐doped carbon and Fe3O4 cathode for enhanced bioelectro‐Fenton microbial fuel cell performance", Int. J. Energy Research, 2019/07, SCI
  • "Effects of assembly pressure on PEM fuel cell performance by taking into accounts electrical and thermal contact resistances", Energy, 179, 490-501, 2019/07, SCI
  • "A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams", Int. J. Heat Mass Transfer, 135, 649-673, 2019/06, SCI
  • "Dynamics of droplets impacting hydrophilic surfaces decorated with a hydrophobic strip", Int. J. Heat Mass Transfer, 135, 235-246, 2019/06, SCI
  • "Optimization of the electrolyte parameters and components in zinc particle fuel cells", Energies, 12, 1090, 2019/06, SCI
  • "Physical properties measurement and performance comparison of membranes for planar membrane humidifiers", Int. J. Heat Mass Transfer, 136, 393-403, 2019/06, SCI
  • "Electromagnetic field analysis and cooling system design for high power switched reluctance motor", IInt. J. Numerical Methods for Heat & Fluid Flow, 29, 1756-1785, 2019/05, SCI
  • "Experimental study of cooling performance of water-based alumina nanofluid in a minichannel heat sink with MEPCM layer embedded in its ceiling", Int. Communi. Heat Mass Transfer, 103, 1-6, 2019/04, SCI
  • "Osmotic desalination by solar energy: A critical review", Renewable Energy, 134, 1473-1490, 2019/04, SCI
  • "Experimental study of transient thermal characteristics of nanofluid in a minichannel heat sink with MEPCM layer in its ceiling", Int. J. Heat Mass Transfer, 133, 1041-1051, 2019/04, SCI
  • "Reduction in the contact time of impacting droplets by decorating a rectangular ridge on superhydrophobic surfaces", Int. J. Heat Mass Transfer, 132, 1105-1115, 2019/04, SCI
  • "Experimental study on fluid flow and heat transfer characteristics of falling film over tube bundle", Int. J. Heat Mass Transfer, 130, 9-24, 2019/03, SCI
  • "Transient cooling characteristics of Al 2 O 3 -water nanofluid flow in a microchannel subject to a sudden-pulsed heat flux", Int. J. Mechanical Sciences, 151, 95-105, 2019/02, SCI
  • "Influence of solid nontransparent inclusion shape on the breakup time of heterogeneous water drops", Int. Communi. Heat Mass Transfer, 101, 21-25, 2019/02, SCI
  • "Bubble dynamics in evaporation flow of R-134a in narrow annular ducts due to flow rate oscillation", Int. Communi. Heat Mass Transfer, 100, 27-34, 2019/01, SCI
  • "Sensitivity analysis and application of machine learning methods to predict the heat transfer performance of CNT/water nanofluid flows through coils", Int. J. Heat Mass Transfer, 128, 825-835, 2019/01, SCI
  • "Application of interface material and effects of oxygen gradient on the performance of single-chamber sediment microbial fuel cells (SSMFCs)", J. Environmental Sciences, 75, 163-168, 2019/01, SCI
  • "Numerical simulation of PV cooling by using single turn pulsating heat pipe", Int. J. Heat Mass Transfer, 127, 203-208, 2018/12, SCI
  • "Investigation on the thermophysical properties and transient heat transfer characteristics of composite phase change materials", Int. Communi. Heat Mass Transfer, 98, 223-231, 2018/11, SCI
  • "Novel achievements in the development of solar ponds: A review", Solar Energy, 174, 189-206, 2018/11, SCI
  • "Applications of eco-friendly refrigerants and nanorefrigerants: A review", Renewable and Sustainable Energy Reviews, 96, 91-99, 2018/11, SCI
  • "Applicability of connectionist methods to predict thermal resistance of pulsating heat pipes with ethanol by using neural networks", Int. J. Heat Mass Transfer, 126, 1079-1086, 2018/11, SCI
  • "Asymmetric heat transfer characteristics of a double droplet impact on a moving liquid film", Int. J. Heat Mass Transfer, 126, 649-659, 2018/11, SCI
  • "Performance evaluation of a multi-stage plate-type membrane humidifier for proton exchange membrane fuel cell", Energy Conversion and Management, 176, 123-130, 2018/11, SCI
  • "Molecular dynamics investigation on enhancement of heat transfer between electrified solid surface and liquid water", Int. J. Heat Mass Transfer, 125, 756-760, 2018/10, SCI
  • "Microencapsulated n-eicosane PCM suspensions: Thermophysical properties measurement and modeling", Int. J. Heat Mass Transfer, 125, 792-880, 2018/10, SCI
  • "The application of artificial neural networks to predict the performance of solar chimney filled with phase change materials", Energy Conversion and Management, 171, 1255-1262, 2018/09, SCI
  • "Cooling performance of Al2O3-water nanofluid flow in a minichannel with thermal buoyancy and wall conduction effects", Case Studies in Thermal Engineering, 12, 833-842, 2018/09, SCI
  • "Efficacy of divergent minichannels on cooling performance of heat sinks with water-based MEPCM suspensions", Int. J. Thermal Sciences, 130, 333-346, 2018/08, SCI
  • "Thermo–Economical Evaluation of Producing Liquefied Natural Gas and Natural Gas Liquids from Flare Gases", Energies, 2018/07, SCI
  • "Contribution of hybrid Al2O3-water nanofluid and PCM suspension to augment thermal performance of coolant in a minichannel heat sink", Int. J. Heat Mass Transfer, 122, 651-659, 2018/07, SCI
  • "Thermal and hydrodynamic characteristics of divergent rectangular minichannel heat sinks", Int. J. Heat Mass Transfer, 122, 264-274, 2018/07, SCI
  • "Comparative study on thermal performance of MEPCM suspensions in parallel and divergent minichannel heat sinks", Int. Communi. in Heat Mass Transfer, 94, 96-105, 2018/05, SCI
  • "Measurement and Artificial Neural Network Modeling of Electrical Conductivity of CuO/Glycerol Nanofluids at Various Thermal and Concentration Conditions", Energies, 2018/05, SCI
  • "Novel bufferless photosynthetic microbial fuel cell (PMFCs) for enhanced electrochemical performance", Bioresource Technology, 255, 83-87, 2018/05, SCI
  • "A combined numerical and experimental study on the forced convection of Al2O3-water nanofluid in a circular tube", Int. J. Heat Mass Transfer, 120, 66-75, 2018/05, SCI
  • "An experimental study of enhanced heat sinks for thermal management using n-eicosane as phase change material", Applied Thermal Engineering, 132, 52-66, 2018/03, SCI
  • "Time periodic evaporation heat transfer of R-134a in a narrow annular duct due to mass flow rate oscillation", Int. J. Heat Mass Transfer, 118, 154-164, 2018/03, SCI
  • "Treatment of OilyWastewater by the Optimization of Fe2O3 Calcination Temperatures in Innovative Bio-Electron-Fenton Microbial Fuel Cells", Energies, 2018/03, SCI
  • "Fluid flow and thermal characteristics in inclined tubes with transcritical carbon dioxide as working fluid", Int. Communi. Heat Mass Transfer, 91, 84-89, 2018/02, SCI
  • "Assessment of recirculation batch mode operation in bufferless Bio-cathode microbial Fuel Cells (MFCs)", Applied Energy, 209, 120-126, 2018/01, SCI
  • "Cooling performance of MEPCM suspensions for heat dissipation intensification in a minichannel heat sink", Int. J. Heat Mass Transfer, 115, 43-49, 2017/12, SCI
  • "Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review", Energy and Buildings, 154, 96-112, 2017/11, SCI
  • "Thermal performance analysis of a 30 kW switched reluctance motor", Int. J. Heat Mass Transfer, 114, 145-154, 2017/11, SCI
  • "Enhanced Peltier cooling of two-stage thermoelectric cooler via pulse currents", Int. J. Heat Mass Transfer, 114, 656-663, 2017/11, SCI
  • "Investigation of heat transfer enhancement by electrohydrodynamics", Int. J. Heat Mass Transfer, 113, 373-383, 2017/10, SCI
  • "Exposing effect of comb-type cathode electrode on the performance of sediment microbial fuel cells", Applied Energy, 204, 620-625, 2017/10, SCI
  • "Transient thermal energy storage in partitioned enclosures packed with microencapsulated phase change materials", Int. Communi. Heat Mass Transfer, 83, 253-261, 2017/08, SCI
  • "Two-phase mixture model for nanofluid turbulent flow and heat transfer: Effect of heterogeneous distribution of nanoparticles", Chemical Engineering Science, 167, 135-144, 2017/08, SCI
  • "Heat transfer enhancement in microchannel heat sink by wavy channel with changing wavelength/amplitude", Int. J. Heat Mass Transfer, 118, 423-434, 2017/08, SCI
  • "Numerical Study of Mixed Convection Inside a Γ-Shaped Cavity with Mg(OH2)-EG Nanofluids", Current Nanoscience, 13, 354-364, 2017/08, SCI
  • "A new scheme for reducing pressure drop and thermal resistance simultaneously in microchannel heat sinks with wavy porous fins", Int. J. Heat Mass Transfer, 111, 1071-1078, 2017/08, SCI
  • "2D Numerical physical model settings for three electron transfer pathways in microbial fuel cells", Sensors and Materials, 29, 1055-1060, 2017/07, SCI
  • "Enhancement of boiling heat transfer of thin water film on an electrified", Int. J. Heat Mass Transfer, 109, 410-416, 2017/06, SCI
  • "Heat and mass transfer of a planar membrane humidifier for proton", Int. J. Heat Mass Transfer, 109, 601-608, 2017/06, SCI
  • "Hydrodynamic performance of a pulsed extractioncolumn containing ZnO nanoparticles: Drop sizeand size distribution", Chemical Engineering Research and Design, 121, 275–286, 2017/05, SCI
  • "Nucleate boiling inside small evaporating droplets: An experimental and", Int. J. Heat Mass Transfer, 108, 2253-2261, 2017/05, SCI
  • "Transient mass transport and cell performance of a PEM fuel cell", Int. J. Heat Mass Transfer, 107, 646-656, 2017/04, SCI
  • "An experimental study of forced convection effectiveness of Al2O3-water nanofluid flowing in circular tubes", Int. Commun. Heat Mass Transfer, 83, 23-29, 2017/04, SCI
  • "Experimental study on time periodic evaporation heat transfer of R-134ain annular ducts due to wall heat flux oscillation", Int. J. Heat Mass Transfer, 106, 1232-1241, 2017/03, SCI
  • "Time periodic saturated flow boiling heat transfer of R-134a in a narrowannular duct due to heat flux oscillation", Int. J. Heat Mass Transfer, 106, 35-46, 2017/03, SCI
  • "Natural convection in T-shaped cavities filled with water-based suspensions of COOH-functionalized multi walled carbon nanotubes", International Journal of Mechanical Sciences, 121, 21-32, 2017/02, SCI
  • "Electrocoalescence behavior of two identical droplets with various droplet radii", Applied Thermal Engineering, 111, 1464-1469, 2017/01, SCI
  • "Bubble characteristics in time periodic evaporation flow of R-134a in a narrow annular pipe due to heat flux oscillation", Int. Comuni. Heat Mass Transfer, 79, 9-15, 2016/12, SCI
  • "Using artificial neural network to predict thermal conductivity", J. Thermal Analysis and Calorimetry, 126, 643-648, 2016/11, SCI
  • "Bubble characteristics in time periodic saturated flow boiling of R-134a", Int. J. Heat Mass Transfer, 102, 1150-1158, 2016/11, SCI
  • "Mixed convection of functionalized DWCNT/water nanofluid in baffled lid-driven cavities", Thermal Science, 2016/10, SCI
  • "Laminar forced convection effectiveness of Al2O3–water nanofluid flow", Int. J. Heat Mass Transfer, 100, 464-481, 2016/09, SCI
  • "Effects of temperature and concentration on rheological behavior of", Int. Comuni. Heat Mass Transfer, 76, 133-138, 2016/08, SCI
  • "Enhancement of maximum temperature drop across thermoelectric", Applied Energy, 175, 285-292, 2016/08, SCI
  • "Development and performance diagnosis of a high", Int. J. Hydrogen Energy, 41, 11784-11793, 2016/07, SCI
  • "Electro-coalescence of two charged droplets under constant and pulsed", Int. J. Heat Mass Transfer, 98, 10-16, 2016/07, SCI
  • "Estimation of thermal conductivity of Al2O3/water (40%)–ethylene glycol", Int. Comuni. Heat Mass Transfer, 74, 125-128, 2016/05, SCI
  • "Study on thermal conductivity of water-based nanofluids", J. Therm. Anal. Calorim., 124, 455-460, 2016/04, SCI
  • "Experimental and numerical study on transient thermal energy storage", Int. J. Heat Mass Transfer, 94, 191-198, 2016/03, SCI
  • "Heat transfer enhancement of microchannel heat sink using transcritical", Energy Conversion and Management, 110, 154-164, 2016/02, SCI
  • "Natural convection in a trapezoidal enclosure filled with carbon", Int. J. Heat Mass Transfer, 92, 76-82, 2016/01, SCI
  • "A Comprehensive Review of Last Experimental Studies on Thermal Conductivity of Nanofluids", Journal of Thermal Analysis and Calorimetry, 122, 863-884, 2015/11, SCI
  • "An Experimental Study on Thermal Conductivity of MgO Nanoparticles Suspended in a Binary Mixture of Water and Ethylene Glycol", Int. Commun. in Heat Mass Transfer, 67, 173-175, 2015/10, SCI
  • "Effects of Slot-jet Length on the Cooling Performance of Hybrid Microchannel/Slot-jet Module", Int. J. Heat Mass Transfer, 89, 838-845, 2015/10, SCI
  • "Mixed Convection Heat Transfer from Surface-Mounted Block Heat Sources in a Horizontal Channel with Nanofluids", Int. J. Heat Mass Transfer, 89, 783-791, 2015/10, SCI
  • "Experimental Study on Thermal Conductivity of Ethylene Glycol based Nanofluids Containing Al2O3 Nanoparticles", Int. J. Heat Mass Transfer, 88, 728-734, 2015/09, SCI
  • "Transient Characteristics of Thermal Energy Storage in an Enclosure Packed with MEPCM Particles", Applied Thermal Engineering, 88, 47-53, 2015/09, SCI
  • "Applicability of Artificial Neural Network and Nonlinear Regression to Predict Thermal Conductivity Mmodeling of Al2O3-Water Nanofluids Using Experimental Data", Int. Commun. in Heat Mass Transfer, 66, 246-249, 2015/08, SCI
  • "Experimental Determination of Thermal Conductivity and Dynamic Viscosity of Ag-MgO/water hybrid nanofluid", Int. Commun. in Heat Mass Transfer, 66, 189-195, 2015/08, SCI
  • "Fluid Flow and Heat Transfer in Microchannel Heat Sinks Based on Porous Fin Design Concept", Int. Commun. in Heat Mass Transfer, 65, 52–57, 2015/07, SCI
  • "Melting Processes of Phase Change Materials in an Enclosure with a Free-Moving Ceiling: An Experimental and Numerical Study", Int. J. Heat Mass Transfer, 86, 780–786, 2015/07, SCI
  • "Multi-parameter Optimization of Flow and Heat Transfer for a Novel Double-layered Microchannel Heat Sink", Int. J. Heat Mass Transfer, 84, 359–369, 2015/05, SCI
  • "Simulation on Melting Processes in a Vertical Rectangular Enclosure with a Free-Moving Ceiling", Int. J. Heat Mass Transfer, 83, 222-228, 2015/04, SCI
  • "Dynamic Cell Performance of kW-grade Proton Exchange Membrane Fuel Cell Stack with Dead-ended Anode", Applied Energy, 142, 108-114, 2015/03, SCI
  • "Optimization of Thermal Resistance and Bottom Wall Temperature Uniformity for Double-layered Microchannel Heat Sink", Energy Conversion and Management, 93, 141-150, 2015/03, SCI
  • "A Brief Review of Natural Convection in Enclosures under Localized Heating with and without Nanofluids", Int. Commun. in Heat Mass Transfer, 60, 37-44, 2015/01, SCI
  • "Rayleigh–Bénard convection of Al2O3/water nanofluids in a cavity", Int. Commun. in Heat Mass Transfer, 57, 22-27, 2014/10, SCI
  • "Buoyancy-driven flow of nanofluids in a cavity considering the Ludwig–Soret effect and sedimentation: Numerical study and experimental validation", Int. J. Heat Mass Transfer, 77, 684-694, 2014/10, SCI
  • "Thermal energy storage characteristics in an enclosure packed with MEPCM particles: An experimental and numerical study", Int. J. Heat Mass Transfer, 73, 88-96, 2014/06, SCI
  • "Optimization of Design Parameters for a Sandwich-Distribution Porous-Microchannel Heat Sink", Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 66, 229-251, 2014/06, SCI
  • "Numerical Optimization of the Thermal Performance of a Porous-microchannel Heat Sink", Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 65, 419-434, 2014/05, SCI
  • "Experiment on thermal performance of water-based suspensions of Al2O3 nanoparticles and MEPCM particles in a minichannel heat sink", Int. J. Heat Mass Transfer, 69, 276-284, 2014/02, SCI
  • "Correlations of Heat Transfer Effectiveness in a Minichannel Heat Sink with Water-based Suspensions of Al2O3 Nanoparticles and/or MEPCM Particles", Int. J. Heat Mass Transfer, 69, 293-299, 2014/02, SCI
  • "Performance Degradation Studies on an Poly 2,5-Benzimidazole High-Temperature PEM Fuel Cell Using an Accelerated Degradation Technique", J. Power Sources, 247, 354-359, 2014/02, SCI
  • "Effects of Nitrogen and Carbon Monoxide Concentrations on Performance of Proton Exchange Membrane Fuel Cells with Pt-Ru Anodic Catalyst", J. Power Sources, 243, 138-146, 2013/12, SCI
  • "Thermal Performance Analysis of Porous Microchannel Heat Sinks with Different Configuration Designs", Int. J. Heat Mass Transfer, 66, 235-243, 2013/11, SCI
  • "Thermal Performance of Porous Microchannel Heat Sinks: Effects of Enlarging Channel Outlets", Int. Commun. in Heat Mass Transfer, 48, 86-92, 2013/11, SCI
  • "Experimental Study on Cooling Performance of Minichannel Heat Sink Using Water-Based MEPCM Particles", Int. Commun. in Heat Mass Transfer,, 48, 67-72, 2013/11, SCI
  • "Numerical Investigation into Transient Response of Proton Exchange Membrane Fuel Cell with Serpentine Flow Field", Int. J. Energy Research, 37, 1302-1312, 2013/09, SCI
  • "Impinging Cooling of Film Hole Surface Using Transient Liquid Crystal Thermograph", Int. Commun. in Heat Mass Transfer, 44, 23-30, 2013/05, SCI
  • "Thermal Performance Enhancement of Microchannel Heat Sinks with Sintered Porous Media", Numer. Heat Transfer-Part A, 63, 666-686, 2013/03, SCI

研討會論文

  • "用於被動式氫氣回收系統之噴射器測試分析", 中華民國力學學會第四十四屆全國力學會議 (CTAM 2020), 宜蘭市, 2020/11/26
  • "Numerical study on the performance of flat-sheet membrane dehumidifiers", 2020 International Symposium on Engineering and Technology, 南投市, 2020/11/14
  • "An experiment on transport properties of membranes for the planar vacuum-based membrane dehumidifier", 2020 International Symposium on Engineering and Technology, 南投市, 2020/11/14
  • "The effects of time periodic subcooled flow boiling heat transfer of R-134a in annular ducts", 2020 International Symposium on Engineering and Technology, 南投市, 2020/11/14
  • "An experiment on air mass transfer of the planar vacuum-based membrane dehumidifier", 2020 International Conference on Mechatronic, Automobile, and Environment Engineering, 金門市, 2020/11/06
  • "Performance simulation of planar membrane humidifiers for PEMFC", 2020 International Conference on Mechatronic, Automobile, and Environment Engineering, 金門市, 2020/11/06
  • "Numerical study of airflow and temperature distributions in single rack", 2020 International Conference on Mechatronic, Automobile, and Environment Engineering, 金門市, 2020/11/06
  • "Bioenergy production utilizing beer wastewater in novel integrated reactors", 2020 International Conference on Mechatronic, Automobile, and Environment Engineering, 金門市, 2020/11/06
  • "機櫃內流場及溫度分佈之數值研究", 2020年能源與冷凍空調學術暨技術研討會, 台中市, 2020/10/31
  • "Numerical simulations on the performance of flat-sheet membrane humidifiers", 中華民國自動機工程學會第二十五屆車輛工程學術研討會, 新北市, 2020/10/30
回頁首