"In-situ transmission electron microscopy investigation of the deformation mechanism in CoCrNi and CoCrNiSi0.3 nanopillars", Scripta Materialia, 255, 116405, 2024/10, SCI
"Exploring the effects of austenitizing conditions on the heterogeneous microstructure and mechanical properties of 11Cr–11Ni–Ti–Mo maraging stainless steel: Breakthrough in the strength-ductility trade-off", Journal of Materials Research and Technology, 31, 3090-3103, 2024/07, SCI
"Evolution of deformation structures in CrCoNiSi0.3 medium entropy alloy subjected to high-strain-rate and quasi-static compressive deformation", Materials Characterization, 214, 114088, 2024/06, SCI
"The effects of austenitization temperature on the microstructural characteristics and mechanical properties of Cr–Mo–V hot work tool steels with different nitrogen contents", Journal of Materials Research and Technology, 30, 9115-9129, 2024/06, SCI
"Effect of repeated-tempering induced martensite on the microstructural evolution in 17–7 PH stainless steel", Materials Characterization, 214, 114091, 2024/06, SCI
"Cryogenic strengthening of Fe27Co24Ni23Cr26 high-entropy alloys via hierarchical nanotwin-driven mechanism", Materials Science and Engineering: A, 897, 146317, 2024/03, SCI
"Effects of different combinations of artificial ageing and warm forming on Ω phase and S phase evolutions in an Al-5.1Cu-1.0Mg-0.4Ag high strength aluminum alloy", Materials Science and Engineering: A, 897, 146254, 2024/02, SCI
"Grain structure and co-precipitation behavior of high-Zn containing Al–Zn–Mg–Cu aluminium alloys during deformation via high-temperature upsetting-extrusion", Journal of Alloys and Compounds, 968, 171871, 2023/08, SCI
"The effect of minor addition of Mn in AA7075 Al–Zn–Mg–Cu aluminum alloys on microstructural evolution and mechanical properties in warm forming and paint baking processes", International Journal of Lightweight Materials and Manufacture, 6, 4, 521-533, 2023/04, SCI
"The effects of room temperature soaking and deep cryogenic treatment on the stress relief phenomenon of TieMo maraging stainless steel: experimental evidence and critical patents investigation", Journal of Materials Research and Technology, 23, 1712, 2023/01, SCI
"Development of microstructures-properties in Fe-0.4C/0.2C-2Si-3Mn carbide-free bainite steels", Materials Characterization, 197, 112670, 2023/01, SCI
"Effect of Sub-zero Treatment on the Microstructural Characteristics and Mechanical Properties of Maraging Stainless Steel", Journal of Materials Engineering and Performance, 2023/01, SCI
"Effect of Cu Additions on the Evolution of Eta-prime Precipitates in Aged AA 7075 Al–Zn–Mg–Cu Alloys", Metal, 2, 12, 2120, 2022/12, SCI
"Effect of Natural Ageing on Subsequent Artificial Ageing of AA7075 Aluminum Alloy", Metal, 12, 10, 1766, 2022/10, SCI
"Investigation of Strain-Induced Precipitation of Niobium Carbide in Niobium Micro-Alloyed Steels at Elevated Temperatures", Metal, 12, 10, 1619, 2022/09, SCI
"Interaction between η-Ni3Ti and reversed austenite within Custom 465 stainless steel: experimental evidence and related patents investigation", Materials Science & Engineering A, 839, 142852, 2022/02, SCI
"Insight on nano-sized precipitate-hardened Ti-Mo 11Cr-11Ni martensitic stainless steel: Experimental Evidence and Related Patents Investigation", Materials Today Communication, 31, 103454, 2022/02, SCI
"Effects of Ti/Mo and Ti/Cu ratio on precipitation behavior of Ti-bearing steel: findings from experiments and critical patent analysis", Journal of Materials Research and Technology, 15, 1430-1445, 2021/09, SCI
"Microstructural Characterization and Mechanical Properties of Duplex and Super Austenitic Stainless Steels under Dynamic Impact Deformation", Journal of Materials Engineering and Performance, 30, 11, 8169-8177, 2021/08, SCI
"Effect of Anodization Treatment on the Thickness, Hardness, and Microstructural Characterization of Anodic Aluminum Oxide Film on AA 6061 and Critical Patent Analysis", Journal of Materials Engineering and Performance, 31, 667–681, 2021/08, SCI
"Electron work function: an indicative parameter towards a novel material design methodology", Scientific reports, 11, 11565, 2021/06, SCI
"Investigation on the ballistic induced nanotwinning in the Mn-free Fe27Co24Ni23Cr26 high entropy alloy plate", Materials Chemistry and Physics, 270, 124707, 2021/05, SCI
"Investigation of nanotwins in the bimodal-structured Fe22Co22Ni20Cr22Mn14 alloy subjected to high-strain-rate deformation at cryogenic temperatures", Materials Characterization, 170, 110667, 2020/09, SCI
"Comparison of dynamic-aging creep and pre-aged creep in Ti-15-3 beta titanium alloy", Materials Science and Engineering: A, 798, 140135, 2020/08, SCI
"Microstructure Characterization of Massive Ferrite in Laser-Weldments of Interstitial-Free Steels", metals, 10, 7, 898, 2020/07, SCI
"Insight on creep behavior for arrayed interphase nano-precipitation in Ti-Microalloyed HSLA steel", Materials Chemistry and Physics, 255, 123553, 2020/07, SCI
"Synergistic effects of carbon content and Ti/Mo ratio on precipitation behavior of HSLA steel: Insights from experiment and critical patent analysis", Materials & Design, 186, 108361, 2020/01, SCI
"Exploring How (Ti+Mo)/C and Ti/Mo Influence the Precipitation Behaviors within microalloyed steels: Experimental Evidence and Related Patents Investigation", Journal of Materials Engineering and Performance, 29, 1882-1891, 2020/01, SCI
"A novel technique for developing a dual-phase steel with a lower strengthdifference between ferrite and martensite", Materials Today Communications, 23, 100895, 2020/01, SCI
"Investigation of massive ferrite in an interstitial-free steel", Materials Characterization, 157, 2019/11, SCI
"A Study on Fabrication and Morphology of 6061 Aluminum Alloy in Hard Anodization", Materials Science Forum, 975, 45-48, 2019/06, EI
"The Microstructure Evolution and Precipitation Behavior within HSLA Steels with Different M/C Atomic Ratios", Materials Science Forum, 975, 49-54, 2019/06, EI
"Glass-Forming Ability, Thermal Stability, and Hardness of Rapidly Solidified Al-Ni-Y-Sc Alloy Ribbons and Rods", Journal of Materials Engineering and Performance, 28, 3, 1419-1427, 2019/03, SCI
"In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened α-iron single-crystal nanopillars", Materials Science and Engineering: A, 746, 406-415, 2019/02, SCI
"從 Impression Products, Inc. v. Lexmark Intern., Inc. 案看美國專利權耗盡原則之最新發展", 智慧財產權月刊, 234, 106-123, 2018/06, ELSE1
"Microstructure characterization of nanocrystalline bainitic steel during tempering", Journal of Alloys and Compounds, 762, 340-346, 2018/05, SCI
"The appl icati on of conver gent be am elec tron diff ract ion (CB ED)analysis on transfor mation-indu ced plasticit y (TRIP) steels", Microscopy Research & Technique, 00, 1-8, 2018/04, SCI
"Role of Sc on the glass forming ability and mechanical properties of Al-Y-Ni-Sc bulk metallic glass produced with different cooling rates", Materials Science and Engineering: A, 725, 119-126, 2018/04, SCI
"Phase quantification in low carbon Nb-Mo bearing steel by electron backscatter diffraction technique coupled with kernel average misorientation", Materials characterization, 139, 49-58, 2018/02, SCI
"Precipitation behavior in bimodal ferrite grains in a low carbon Ti-V-bearing steel", Scripta Materialia, 143, 103-107, 2017/09, SCI
"Microstructural evolutions of low carbon Nb/Mo-containing bainitic steels during high-temperature tempering", Materials Characterization, 131, 298-305, 2017/07, SCI
"Effect of Cr and Al additions on the development of interphase-precipitated carbides strengthened dual-phase Ti-bearing steels", Materials & Design, 119, 319-325, 2017/01, SCI
"Microstructure Characterization and Mechanical Property of 17-4 Precipitation Hardening (PH) Stainless Steel under Different Heat Treatment Conditions", 2023 Materials Research Society-Taiwan International Conference (2023 MRSTIC), 新竹, 2023/11/17
"Microstructure Characterization and Mechanical Properties of Cr-Mo-V Hot Work Tool Steel under Different Heat Treatment Conditions", 2023 Materials Research Society-Taiwan International Conference (2023 MRSTIC), 新竹, 2023/11/17
"Transformation behavior of Cr-Mo-V hot work tool steel after tempering treatment under various austenitizing conditions", 20th International Microscopy Congress (IMC 20), Busan, 2023/09/10
"Development of High Performance Hot Work Tool Steel for Die Casting with High Impact Toughness and Hardnes", 2023 SEAISI Conference & Exhibition, Manila, 2023/05/22
"The relation between aging temperature, microstructure evolution and hardening of Ti-Mo precipitation hardening stainless steel (Ti-Mo PHSS): focus on experiments and patent analysis", 2021 MRSTIC Virtual Conference, TAIPEI, 2021/11/13
"Investigation of the precipitation behavior of complex carbides in Multiple Component HSLA steel: Deduction from Experiments and Critical Patent Analysis", The 11th International Conference on the Advanced Materials Series (THERMEC'2021 Virtual Conference), Virtual Conference, 2021/06/01
"The Microstructure Evolution and Precipitation Behavior within HSLA Steels with Different M/C Atomic Ratios", The 7th Asia Conference on Mechanical and Materials Engineering, TOKYO, 2019/06/14
"Focus on the Precipitation Behavior in the Modern DP Steel", The 6th International Conference on Advanced Steels (ICAS 2018), Jeju, Korea., 2018/11/29
"下一世代發光二極體(Micro LED 、Mini LED)技術發展：以專利資料分析為核心", 2018_智慧財產權理論與實務研討會, 台北, 2018/10/26
"Co-Precipitation of Nano-Sized Carbide and Cu Particles in the Low Carbon Dual Phase Steel During Step Quenching and Tempering Process", The 14th International Conference on Nanostructured Materials (NANO2018), 香港, 2018/06/24
"Precipitation Characterization and Mechanical Behavior in Novel DP Steels", 2nd International Conference on Advanced Manufacturing and Materials (ICAMM 2018), 東京, 2018/06/11
"High Strength Steel Hardened mainly by nano-sized carbides and copper particles", EAMC3, the 3rd East-Asia Microscopy Conference, BUSAN, 2017/11/07
"Dual Precipitation of Nano-Sized Carbide and Copper Particles in a Low Carbon DP steel", 18th International Union of Materials Research Societies-International Conference in Asia, IUMRS-ICA 2017, Taipei, 2017/11/05
