"Investigation of interactions between fiber lasers and Si3N4 sheets for drilling square microholes with multi-ring strategy", International Journal of Advanced Manufacturing Technology, 132, 3-4, 1557-1572, 2024/05, SCI
"Facile synthesis of SnO2 nanopowders on laser-patterned ITO electrodes for fast response NO2 gas sensors", International Journal of Advanced Manufacturing Technology, 131, 9-10, 4953-4964, 2024/04, SCI
"Enhancing the cooling efficiency of aluminum-filled epoxy resin rapid tool by changing inner surface roughness of cooling channels", Polymers, 16, 7, 874, 2024/04, SCI
"Enhancing the weld quality of polylactic acid biomedical materials using rotary friction welding", Polymers, 16, 7, 991, 2024/04, SCI
"Laser-induced reduced graphene oxide for high-performance electrochemical sensors of antipyretic drug in real samples", Environmental Science: Nano, 11, 3, 951-968, 2024/03, SCI
"Investigation of laser-patterned biomimetic microstructures on CFRP and AA5052 surfaces to enhance their single-lap bonding strength", Composites Part A: Applied Science and Manufacturing, 178, 107980, 2024/03, SCI
"High-performance flexible asymmetric supercapacitors based on Hy-NiCoS/CNTs composites on porous graphene films", Energy, 291, 130365, 2024/03, SCI
"Van der Waals epitaxy growth and characterization of 7:7:8 commensurate heterointerfaces between h-AlN and two-dimensional WS2/c-Al2O3", ACS Applied Electronic Materials, 6, 1, 242-248, 2024/01, SCI
"Characterization analysis of 355 nm pulsed laser cutting of 6H-SiC", International Journal of Advanced Manufacturing Technology, 130, 5-6, 3133-3147, 2024/01, SCI
"Process parameters optimization of rotary friction welding of polylactic acid-containing glass fiber and polylactic acid-containing carbon fiber using the Taguchi method", International Journal of Advanced Manufacturing Technology, 129, 3-4, 1817-1828, 2023/11, SCI
"Synthesis of flower-like Mn-Co-MoS2 compounds for high-performance asymmetric supercapacitors", International Journal of Advanced Manufacturing Technology, 128, 7-8, 3661-3671, 2023/10, SCI
"Rotary friction welding of polyetheretherketone biopolymer rods using variable rotational speed", Polymers, 15, 20, 4077, 2023/10, SCI
"Enhancing surface temperature uniformity in a liquid silicone rubber injection mold with conformal heating channels", Materials, 16, 17, 5739, 2023/09, SCI
"Development of an injection mold with high energy efficiency of vulcanization for liquid silicone rubber injection molding of the fisheye optical lens", Polymers, 15, 13, 2869, 2023/07, SCI
"Facile fabrication of oxygen-enriched MXene-based sensor and their ammonia gas-sensing enhancement", Advanced Materials Interfaces, 10, 16, 2300166, 2023/06, SCI
"Synthesis of Ti3C2Tx/ZnO composites decorated with PEDOT:PSS for NO2 gas sensors", International Journal of Advanced Manufacturing Technology, 126, 5-6, 2269-2281, 2023/05, SCI
"Investigation of fiber laser-induced porous graphene electrodes in controlled atmospheres for ZnO nanorod-based NO2 gas sensors", Applied Surface Science, 620, 156847, 2023/05, SCI
"Highly responsive and selective NO2 gas sensors based on titanium metal organic framework (Ti-MOF) with pyromellitic acid", Sensors and Actuators A: Physical, 354, 114301, 2023/05, SCI
"Highly sensitive humidity sensors based on Li-C3N4 composites on porous graphene flexible electrodes", Applied Surface Science, 606, 155001, 2022/12, SCI
"Mechanical characteristic comparison of additively manufactured Ti–6Al–4V lattice structures in biocompatible bone tissue growth", Materials Science and Engineering: A, 857, 144045, 2022/11, SCI
"Highly sensitive and wearable capacitive pressure sensors based on PVDF/BaTiO3 composite fibers on PDMS microcylindrical structures", Measurement, 202, 111817, 2022/10, SCI
"Laser-induced graphene via the far-infrared irradiation of polyimide films for flexible electric heater applications", International Journal of Advanced Manufacturing Technology, 120, 7-8, 5351-5362, 2022/06, SCI
"Investigation of line-shaped CO2 laser annealing on InN/AlN/sapphire substrates", International Journal of Advanced Manufacturing Technology, 120, 9-10, 5687-5696, 2022/06, SCI
"Mechanical and microstructural properties of additively manufactured Ti–6Al–4V stents with CO2 laser postannealing treatment", International Journal of Advanced Manufacturing Technology, 119, 9-10, 6571-6581, 2022/04, SCI
"Effects of hybrid surfactants on the quality and yield of graphene using a novel electrochemical-mechanical exfoliation process", International Journal of Advanced Manufacturing Technology, 119, 9-10, 6809-6817, 2022/04, SCI
"Superhydrophobic graphene/ceramic templates for the preparation of particulate drugs", Ceramics International, 48, 2, 2021-2030, 2022/01, SCI
"Portable optical instrumentation for the evaluation of the onsite antioxidant scavenging capacity assay", Instrumentation Science and Technology, 50, 2, 105-117, 2022/01, SCI
"Synthesis of nanograiny SnO2 films on laser-patterned graphene/ceramic substrates for low-temperature ethanol gas sensors", Ceramics International, 47, 23, 33498-33508, 2021/12, SCI
"Investigation of interactions between high pulsed ultraviolet lasers and composite graphene/AgNWs films", Applied Surface Science, 570, 151060, 2021/12, SCI
"A simple approach to MXene micropatterning from molecularly driven assembly", ACS Omega, 6, 51, 35866-35875, 2021/12, SCI
"Surface microtexturing of Ti-6Al-4V and SS316L alloys using high pulsed fiber lasers for improving the adhesive bonded performance", Optics and Laser Technology, 143, 107349, 2021/11, SCI
"Ultrafast laser direct writing of screen-printed graphene-based strain electrodes for sensing glass deformation", Ceramics International, 47, 20, 29099-29108, 2021/10, SCI
"Single-step fiber laser reduction and patterning of graphene oxide films for ceramic-based heaters", Ceramics International, 47, 16, 23423-23432, 2021/08, SCI
"Surface modification of addition manufactured Ti–6Al–4V alloys by ultraviolet pulsed laser scanning technique", Journal of Laser Micro/Nanoengineering, 16, 1, 24-29, 2021/04, SCI
"Investigation of electrochemical reduction effects on graphene oxide powders for high performance supercapacitors", International Journal of Advanced Manufacturing Technology, 113, 3-4, 1203-1213, 2021/03, SCI
"Development of flexible triboelectric generators based on patterned conductive textile and PDMS layers", Energies, 14, 1391, 2021/03, SCI
"淺談風力發電機非破壞性檢測", 科儀新知, 224, 55-66, 2020/09, ELSE1
"Investigation of interactions between ultrafast laser beams and screen-printed silver nanopaste films", Applied Surface Science, 512, 144696, 2020/05, SCI
"Adhesion enhancement of conductive graphene/PI substrates through a vacuum plasma system", Surface and Coatings Technology, 388, 125601, 2020/04, SCI
"Controlled bridge growth of ZnO nanowires on laser-scribed graphene-based devices for NO gas detection", Applied Surface Science, 508, 145204, 2020/04, SCI
"Performance evaluation of μDMFCs based on porous-silicon electrodes and methanol modification", Energy, 192, 116666, 2020/02, SCI
"Determination of the refractive index of molybdenum using a spectrophotometric method", Sensors and Materials, 31, 11, 3517-3526, 2019/11, SCI
"High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation", International Journal of Advanced Manufacturing Technology, 104, 5-8, 2751-2760, 2019/10, SCI
"Development of textile-based triboelectric nanogenerators integrated with plastic metal electrodes for wearable devices", International Journal of Advanced Manufacturing Technology, 104, 5-8, 2633-2644, 2019/10, SCI
"Ultrafast laser structuring of graphene-based multi-zone heaters for the detection of antioxidant capacity", International Journal of Advanced Manufacturing Technology, 103, 5-8, 3115-3124, 2019/08, SCI
"High-performance graphene-based heaters fabricated using maskless ultraviolet laser patterning", International Journal of Advanced Manufacturing Technology, 102, 9-12, 3011-3020, 2019/06, SCI
"A facile approach to fabrication and characterization of conductive conjugated polyvinyl alcohol graphene composite nanofibers", Materials Letters, 233, 130-133, 2018/12, SCI
"Multilayer stack materials on silicon-based wafer dicing processes using ultraviolet laser direct dicing and milling methods", Optics and Laser Technology, 108, 441-449, 2018/12, SCI
"Pure titanium foil hybrid surface modification using ultraviolet laser micromachining", Journal of Laser Micro/Nanoengineering, 13, 3, 216-222, 2018/12, SCI
"Characteristics of graphene oxide films reduced by using an atmospheric plasma system", Nanomaterials, 8, 10, 802, 2018/10, SCI
"Investigation of post-annealing aluminum-doped zinc oxide (AZO) thin films by a graphene-based heater", Applied Surface Science, 448, 163-167, 2018/08, SCI
"Picosecond laser micropatterning of graphene films for rapid heating chips", Applied Surface Science, 450, 380-386, 2018/08, SCI
"Laser-induced reduction of graphene oxide powders by high pulsed ultraviolet laser irradiations", Applied Surface Science, 444, 578-583, 2018/06, SCI
"Self-powered paper-based humidity sensors with composite MgCl2/CNTs", The 20th International Conference on Automation Technology (Automation 2023), 台北市, 2023/12/08
"Characterization of the WS2 thin films using pulsed laser surface modification", The 24th International Symposium on Laser Precision Microfabrication (LPM2023), Aomori, 2023/06/13
"Micro/nano surface formation on egg surface using ultraviolet laser irradiation", The 16th International Conference on Laser Ablation (COLA), Matsue, 2022/04/24
"Tool wear evaluation and milling particle monitoring of carbon fiber-reinforced plastic (CFRP) plates", The 18th International Confernce on Automation Technology (Automation 2021), Kimmen, 2021/11/12
"Ablation of molybdenum film by laser direct and indirect irradiation directions", 15th International Conference on Laser Ablation (COLA 2019), Maui-Hawaii, 2019/09/08
"Ultraviolet laser patterning of AgNWs/graphene hybrid thin films for electrode structures", 15th International Conference on Laser Ablation (COLA 2019), Maui-Hawaii, 2019/09/08
"Laser surface modification of additive manufactured Ti-6Al-4V alloy plate using a pulsed ultraviolet laser", 15th International Conference on Laser Ablation (COLA 2019), Maui-Hawaii, 2019/09/08
"Low-cost vibration and acceleration sensors module for the drilling processes monitoring", 2019 IEEE Sensors Applications Symposium (SAS), Sophia Antipolis, 2019/03/11
"Design, fabrication, identification and test of a closed-loop moving magnetic scanning module for RGB laser projector", 10th International Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI), Kunming, 2018/08/08
"Picosecond laser surface treatment of black silicon for the light absorption improvement of solar cells", 2018 International Conference on Smart Sensors & 23rd Symposium of Association for Chemical Sensors, Taipei, 2018/06/01
"A study on ultra-short pulsed laser hole-drilling process for ceramic sheets", 2018 International Conference on Smart Sensors & 23rd Symposium of Association for Chemical Sensors, Taipei, 2018/06/01
