按Enter到主內容區
:::

國立臺北科技大學 學術資源網

:::

江卓培教授Jiang Cho-Pei

現職:
臺北科大/機械工程系

期刊論文

  • "Design and fabrication of multi-material pneumatic soft gripper using newly developed high-speed multi-material vat photopolymerization 3D printer", The International Journal of Advanced Manufacturing Technology, 2023/12, SCI
  • "Superlubricity of Materials: Progress, Potential, and Challenges", materials, 16, 14, 5145, 2023/07, SCI
  • "Surface Engineering of Metals: Techniques, Characterizations and Applications", metals, 13, 7, 1299, 2023/07, SCI
  • "Laser Powder Bed Fusion of Inconel 718 Tools for Cold Deep Drawing Applications: Optimization of Printing and Post Processing Parameters", materials, 2023/06, SCI
  • "Development of a Novel Tape-Casting Multi-Slurry 3D Printing Technology to Fabricate the Ceramic/Metal Part", Materials, 16, 2, 14, 2023/01, SCI
  • "Selective Laser Melting of Free-Assembled Stainless Steel 316L Hinges Optimization of Volumetric Laser Energy Density and Joint Clearance", metals, 12, 1223, 2022/07, SCI
  • "Microforming a Miniature Cup-Shaped Internal Gear Using a Cold Lateral Extrusion Process", metals, 2022/05, SCI
  • "Optimization of design and fatigue simulations for an electric assisted bicycle frame using uniform design and grey relational analysis", The Journal of Strain Analysis for Engineering Design, 2022/03, SCI
  • "Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation", Rapid Prototyping Journal, 12, 2022/02, SCI
  • "Mechanical reinforcement of 3D printed cordierite-zirconia composites", Ceramics International, 2021/12, SCI
  • "Development of 3D Slurry Printing Technology with Submersion-Light Apparatus in Dental Application", Materials, 14, 7873, 12, 2021/11, SCI
  • "Selective Laser Melting of Stainless Steel 316L with Face-Centered-Cubic-Based Lattice Structures to Produce Rib Implants", Materials, 14, 5962, 20, 2021/09, SCI
  • "Multi-resin Additive Manufacturing Process for Printing a Complete Denture and an Analysis of Accuracy", 3D Printing and Additive Manufacturing, 2021/07, SCI
  • "Three-Dimensional Slurry Printing Technology in Ceramic and Metal Slurry", Solid State Phenomena, 311, 21-26, 2020/10, EI
  • "Design improvement and fatigue analysis for a bicycle handlebar stem system using uniform design method and genetic algorithm", Proc IMechE Part C: J Mechanical Engineering Science, 234, 11, 2266-2278, 2020/02, SCI
  • "A comparison of the marginal fit and mechanical properties of a zirconia dental crown using CAM and 3DSP", Rapid Prototyping Journal, 25, 7, 1187-1197, 2019/07, SCI
  • "A hybrid platform for three-dimensional printing of bone scaffold by combining thermal-extrusion and electrospinning methods", Microsystem Technologies, 2019/02, SCI
  • "Improvements in Welding Properties of Titanium Through the Use of Interlayers", Technological Innovations in Metals Engineering, 71, 697–702, 2019/01, SCI
  • "Fabrication of three-dimensional mPEG-PCL-mPEG scaffolds combined with cell-laden gelatin methacrylate (GelMA) hydrogels using thermal extrusion coupled with photo curable technique", Microsystem Technologies, 2018/10, SCI
  • "Finite element based optimization design for a one-piece zirconia ceramic dental implant under dynamic loading and fatigue life validation", Structural and Multidisciplinary Optimization, 2018/10, SCI

研討會論文

  • "開發雙樹脂光固化聚合三維列印機暨軟/硬拉脹結構之列印製程優化", 中華民國力學學會第四十七屆全國力學會議 (CTAM 2023), 雲林縣虎尾鎮, 2023/11/17
  • "氧化鋯光固化漿料三維列印結合精密鑄造製作互穿複合結構之研究", 中華民國力學學會第四十七屆全國力學會議 (CTAM 2023), 雲林縣虎尾鎮, 2023/11/17
  • "開發全數位客製化下顎前移裝置流程與高精度三維列印製作", 中華民國力學學會第四十七屆全國力學會議 (CTAM 2023), 雲林縣虎尾鎮, 2023/11/17
  • "使用316L不鏽鋼製出具有FCC結構的肋骨植入物", 中華民國力學學會第四十七屆全國力學會議 (CTAM 2023), 雲林縣虎尾鎮, 2023/11/17
  • "Printing Parameter and Post- processing Optimization of Selective Laser Melting Inconel 718 for Sheet Metal Stamping Application", HI-AM 2023, Halifax, 2023/06/27
  • "選擇性雷射熔化列印技術之複雜形狀的微沖壓製造研究", 2023 第 21 屆精密機械與製造科技研討會論文集-PMMT 2023, 屏東, 2023/05/22
  • "燒結參數對雙噴嘴熔融擠製列印不�瓡�/鉻鎳鐵合金複合材料的微結構和機械性", 2023 第 21 屆精密機械與製造科技研討會論文集-PMMT 2023, 屏東, 2023/05/22
  • "EFFECT OF YTTRIA-STABILIZED ZIRCONIA ON MICROSTRUCTURE OF INCONEL 718 AS METAL-CERAMIC COMPOSITE FABRICATED BY SLM", Proceedings of 2022 International Conference on Mechatronic, Automobile, and Environment Engineering, 澎湖, 2022/07/15
  • "ADDITIVE MANUFACTURING OF MATERIAL EXTRUSION WITH KAOLINITE AND RECYCLE OYSTER SHELL", Proceedings of 2022 International Conference on Mechatronic, Automobile, and Environment Engineering, 澎湖, 2022/07/15
  • "三維列印用光固化水可洗氧化鋁漿料之開發", 第20屆精密機械與製造科技研討會, 屏東, 2022/05/22
  • "金屬三維列印Inconel 718合金件的機械性質改善研究", 第20屆精密機械與製造科技研討會, 屏東, 2022/05/22
  • "透過選擇性雷射融熔(SLM)製造具面心立方晶格結構的不鏽鋼316L肋骨移植物", 中華民國力學學會第四十五屆全國力學會議, 台北, 2021/11/18
  • "SS316L經SLM製程後雷射功率與活動間隙極限關係之探討", 第19屆精密機械與製造科技研討會, 屏東, 2021/05/22
  • "反向引伸成型加工之有限元素分析", 第19屆精密機械與製造科技研討會, 屏東, 2021/05/22
  • "上照式光投影固化三維列印之 沉浸貼面曝光 器機構開發", 2020中華民國力學學會第四十四屆全國力學會議, 宜蘭, 2020/11/26
  • "Three-dimensional Printing of Low-Temperature Co-Fired Ceramic", 2020中華民國力學學會第四十四屆全國力學會議, 宜蘭, 2020/11/26
  • "下照式大面積液晶光投影三維連續列印生產系統之開發", 2020中華民國力學學會第四十四屆全國力學會議, 宜蘭, 2020/11/26
  • "有限元素分析桌上型四柱伺服沖壓機之結構共振評估", 第七屆台灣塑性加工研討會, 國立高雄科技大學 高雄市, 2020/11/23
  • "一級鈦伺服沖壓微引伸成型極限之路徑探討", 第七屆台灣塑性加工研討會, 國立高雄科技大學 高雄市, 2020/11/23
  • "Tensile Properties of Various 316L Cellular Structure Manufactured by Selective Laser Melting", The 4th International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2020, Surabaya, 2020/10/19
  • "應用光固化三維列印技術製作根管於臨床前訓練", 中國機械工程學會第三十六屆全國學術研討會, 台北, 2019/12/07
  • "漿料類三維列印鋪層刮刀之最佳化設計與驗證", 中國機械工程學會第三十六屆全國學術研討會, 台北, 2019/12/07
  • "四柱型桌上伺服沖床開發與鈦合金板微引伸成形之研究", 第六屆台灣塑性加工研討會論文集, 高雄, 2019/11/18
  • "微雙階正齒輪之微成型方式與有限元素分析結果", 第六屆台灣塑性加工研討會論文集, 高雄, 2019/11/18
  • "鈦合金微斜齒輪之熱擠壓技術開發", 第六屆台灣塑性加工研討會論文集, 高雄, 2019/11/18
回頁首