Class 2004-2010
Class 2010
| Master Hsu, Tzu-Wen | Master Chen, Shih-Chieh | Master Tsai, Pei-Huang |
| The Development of Layer Image Capturing and Modeling System for 3D Solid Parts. | The development of the paving system for Solvent-based Slurry Stereolithograph. | The Development of Laser Based Moldless Forming Process for Thin Shell Application . |
| Master Liang, Bo-Jun | Master Li, Kang-Fang | Master Chen, Syu-Jhan |
| The Development of Dynamic Foot Pressure Image System with the Ability of Shear Force Measurement. | Development of the Solvent Based Slurry Stereolithography Rapid Prototyping. | The Development of 3D Layer Image Capturing and Modeling System. |
Class 2009
| Dr. Hsieh, Ming-Zhe | Master Jen, Chen-Chung | Master Lin, Jui-Lung |
| The Development of Micro-RP System based on Spray Coating Technology. | The Development of self-propelled Inkjet Printer. | The Development of the Moldless Thermal Forming Process and its Thin Sheet Application. |
| Master Huang, Hsin-Hsen | Master Liao, Wen-Chun | Master Lee, Chin-Hong |
| The Development of Foot Pressure Image System Based on Micro Pillow Structure. | The Feasibility of Rapid Prototyping on Mouse Mockup. | The study of axial fan with even-blade rotor. |
| Master Yang, Ming-Ji |
| The Study of Phase Shift Used Exposure Using Pin Array Mask. |
Class 2008
| Master Hou, Po-Chain | Master Ciou, Sheng-Siang | Master Chou, Ching-Hao |
| Using Micro Piezo Printer to Develop the Rapid Prototyping System. | The Development of the Innovative Rapid 2.5D Thin Shell Prototype Fabrication Process. | Manufacturing Ceramic Shell Mold with Slurry Rapid Prototyping Technology. |
| Master Chiou, Shian-Yi | Master Wang, Ze-Cing |
| Increasing Mechanical Strength of Ceramic Work Pieces by Infiltration and Sintering. | The development of innovative foot pressure sensing device and customized shoe pad fabrication technology. |
Class 2007
| Master Hsu, Chien-Chung | Master Lee, Tung-Ming | Master Hung, Ching-Yi |
| The Innovative Color Filterless LCD by using Three Color Bank Scrolling Backlights. | The Error Deviation Analysis of the Measurement of 3D Points Cloud Based on Fixed Points Merging Technology. | The Improvement of Spray Coating Technology Used in Micro Rapid Prototyping System. |
| Master Huang, Guo-Enl | Master Tsai, Jun-Chia | Master Jhu, Ruei-Lin |
| The Development of Plastic Slurry type Rapid Prototyping System. | The Application of Engineering Plastic Powder Fabrication Using Spraying Technology. | The Development of Automatic Micro Rapid Prototyping System . |
| Master Ho, Ping-Tsang |
| Rapid Design and Development for High Performance PC Fan. |
Class 2006
| Master Huang, Jun-Bao | Master Chen, Wei-Ping | Master Lin, Meng-Te |
| The Rapid Development for the Plastic Spanning Type Wrist Fixator. | The Research and Development of 2.5D Relief Plate Fabrication System with Gray Level Dynamic Mask. | The Process Development of Silicon Mold for Thin Plates with Micro-Features. |
| Master Lin, Shih-Chieh | Master Yen, Chih-Hao | Master Chang, Yu-Yuan |
| Rapid Design for Innovation External Fixation of the Wrist. | The Improvement of Micro Rapid Prototyping System using Spray Coating Technology. | Applying Many Column Maskless Lithography Technology to Micro-RP System. |
| Master Huang, I-Kia | Master Yang, Sheng-Lung |
| The Software Development of Triangle Meshes Reconstructing Sequent from 2D Images. | Apply Tool Compensation to Solid Type Rapid Prototyping System for Surface Smoothing. |
Class 2005
| Master Wei, Hong-Hua | Master Su, Xiang-Hui |
| Development of Micro Rapid Prototyping System by Spray Coating Technology. | The Development of an Innovation 2.5D Relief Plate Fabrication System. |
Class 2004
| Master Zeng, Guan-Zhong | Master Xie, Ming-Zhe | Master Lu, Shao-An |
| The Research of Optimal Heat Pipe Thermal Module Optimization. | The Development of Micro Rapid Prototyping System using Dynamic Mask. | New Process Development of Aluminum-Epoxy Mold for Plastic Injection. |